Search resultsProducts found: 104

£75.29 £40.15 (£48.18 UK, incl VAT)
2109-160
Description: This is a very large serial graphic LCD. The Serial Graphic LCD backpack is soldered to the 160x128 pixel “Huge” Graphic LCD and...
1 item(s)
End of Line
+
Add to wish list

£90.34 £30.11 (£36.13 UK, incl VAT)
3807-425
D escription: The Cellular Shield for Arduino includes all the parts needed to interface your Arduino with an SM5100B cellular module. This allows you to...
1 item(s)
End of Line
+
Add to wish list

£90.34 £30.11 (£36.13 UK, incl VAT)
3340-206
The 9DOF Sensor stick is a very small sensor board with 9 degrees of freedom. It includes the ADXL345 accelerometer, the HMC5883L magnetometer, and the...
1 item(s)
End of Line
+
Add to wish list

£84.38 £28.13 (£33.76 UK, incl VAT)
3800-101
The Pololu USB 16-servo controller is the latest addition to our line of R/C hobby servo controllers. The compact module measures just 48 x 26mm including...
2 item(s)
End of Line
+
Add to wish list

£60.23 £20.08 (£24.10 UK, incl VAT)
3340-204
This is a simple breakout for the ADXL345 accelerometer and the ITG-3200 gyro. With this board, you get a full 6 degrees of freedom. The sensors communicate...
1 item(s)
End of Line
+
Add to wish list

£52.70 £17.57 (£21.08 UK, incl VAT)
3807-437
Description: This is an Arduino shield with pogo pin connectors for each and every GPIO. It's essentially the same rig that Sparkfun use to...
1 item(s)
End of Line
+
Add to wish list

£52.70 £17.57 (£21.08 UK, incl VAT)
3813-101
Fingerprint scanners are awesome. Why use a key when you have one right at the tip of your finger? Unfortunately, they're usually unreliable or difficult...
1 item(s)
End of Line
+
Add to wish list

£20.78 £16.63 (£19.96 UK, incl VAT)
3801-230
This gyroscope board is a basic carrier/breakout board for the ST LPR510AL dual-axis gyro, which measures the angular rates of rotation about the pitch (x)...
1 item(s)
End of Line
+
Add to wish list

£48.96 £16.32 (£19.58 UK, incl VAT)
3800-103
The Pololu serial 16-servo controller allows you to control up to sixteen RC servos from almost any robot controller or computer. The interface to the servo...
2 item(s)
End of Line
+
Add to wish list

£30.11 £16.06 (£19.27 UK, incl VAT)
3801-017
The LSM303DLH is a triple axis accelerometer combined with a triple axis magnetic sensor. This breakout board uses the LSM303DLH to give a you the data you...
1 item(s)
End of Line
+
Add to wish list

£31.62 £10.54 (£12.65 UK, incl VAT)
3804-035
Description: This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to...
1 item(s)
End of Line
+
Add to wish list

£30.11 £10.04 (£12.05 UK, incl VAT)
2110-803
This is the medium sized LED Matrix with a backpack from Sparkfun COM-00759 that has been designed to take SPI serial input and display any graphics you...
2 item(s)
End of Line
+
Add to wish list

£18.07 £9.64 (£11.57 UK, incl VAT)
3340-025
This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input...
2 item(s)
End of Line
+
Add to wish list

£28.91 £9.03 (£10.84 UK, incl VAT)
2900-050
This is a stereo amplifier kit designed by Sparkfun BOB-00718 to make use of the STA540 power amplifier IC. Once this kit is completed you have a fully...
1 item(s)
End of Line
+
Add to wish list

£27.10 £9.03 (£10.84 UK, incl VAT)
3808-400
Description: The Raspberry Pi packs plenty of processing power in a small and inexpensive package and that makes it perfect for robot brains! The only...
1 item(s)
End of Line
+
Add to wish list

£24.09 £8.03 (£9.64 UK, incl VAT)
1615-105
The MPR121 capacitive keypad uses the MPR121 and 12 touch sensitive pads to give you a simple 'keypad' with an I2C output. The board also has four mounting...
1 item(s)
End of Line
+
Add to wish list

£23.96 £7.99 (£9.59 UK, incl VAT)
3807-447
Description: This shield allows you to interface Wixel wireless modules to your Arduino (and other compatible products), enabling simple wireless...
2 item(s)
End of Line
+
Add to wish list

£22.59 £7.53 (£9.04 UK, incl VAT)
2109-314
This is the latest evolution of the Sparkfun LCD-09393 serial LCD. Included on a single board is a 16x2 LCD and an embedded circuit based around a PIC 16F88....
1 item(s)
End of Line
+
Add to wish list

£22.59 £7.53 (£9.04 UK, incl VAT)
3807-444
Description: If you use the SparkFun Inventors Kit (see related products below) in a classroom or workshop setting, you know that when a bunch of...
3 item(s)
End of Line
+
Add to wish list

£22.59 £7.53 (£9.04 UK, incl VAT)
2110-684
The ZX Distance and Gesture Sensor is a touchless sensor that is capable of looking for simple gestures. Developed in conjunction with XYZ Interactive ,...
3 item(s)
End of Line
+
Add to wish list

£13.55 £7.23 (£8.68 UK, incl VAT)
3340-021
Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of...
2 item(s)
End of Line
+
Add to wish list

£13.55 £7.23 (£8.68 UK, incl VAT)
3807-461
The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED display. This USB...
1 item(s)
End of Line
+
Add to wish list

£20.60 £6.87 (£8.24 UK, incl VAT)
2109-204
20 characters x 4 line alphanumeric display module. Overall size 98 x 62 x 13mm (Images are not of this actual display but of the 20 x 2 line equivalent...
1 item(s)
End of Line
+
Add to wish list

£12.80 £6.83 (£8.20 UK, incl VAT)
2110-820
Make your own LED Matrix with minimal soldering, suitable for any beginner! The kit will give you a great introduction to programming an LED Matrix. This...
2 item(s)
End of Line
+
Add to wish list

£19.57 £6.52 (£7.82 UK, incl VAT)
2904-851
Description: This is the LilyPad Arduino Simple Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad...
2 item(s)
End of Line
+
Add to wish list

£12.05 £6.42 (£7.70 UK, incl VAT)
2400-017
Surface transducers give you the awesome power to turn almost any surface into a speaker. Much like our larger surface transducer, this is essentially just...
1 item(s)
End of Line
+
Add to wish list

£11.29 £6.02 (£7.22 UK, incl VAT)
3801-032
Zilog's ePIR is a fully functional motion-detecting single-board computer (SBC). Combined on this board are a Z8 Encore! XP MCU, and a Murata passive...
1 item(s)
End of Line
+
Add to wish list

£19.27 £6.02 (£7.22 UK, incl VAT)
3807-411
It's blue! It's skinny! It's the Arduino Pro! SparkFun's DEV-09219 minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader...
10 item(s)
End of Line
+
Add to wish list

£10.54 £5.62 (£6.74 UK, incl VAT)
3813-030
This load sensor is the same one found in digital bathroom scales (you know, the ones you use in January for your New Year's resolutions, and then forget...
2 item(s)
End of Line
+
Add to wish list

£16.56 £5.52 (£6.62 UK, incl VAT)
3804-045
This module from Roving Networks is powerful, small, and very easy to use. This Bluetooth module is designed to replace serial cables. The Bluetooth stack...
1 item(s)
End of Line
+
Add to wish list

£15.57 £5.19 (£6.23 UK, incl VAT)
2110-638
This quadrature encoder works with our Pololu micro metal gearmotors, 42×19mm wheel, and extended bracket to measure the rotation speed and direction...
1 item(s)
End of Line
+
Add to wish list

£15.06 £5.02 (£6.02 UK, incl VAT)
2904-860
Description: The is a breakout board for the popular XBee modules. Board includes easy-to-sew tabs and all the necessary power regulation to run on the...
2 item(s)
End of Line
+
Add to wish list

£9.03 £4.82 (£5.78 UK, incl VAT)
2900-434
Description: This is a very small infrared receiver based on the TSOP85 receiver from Vishay. This receiver has all the filtering and 38kHz demodulation...
1 item(s)
End of Line
+
Add to wish list

£9.03 £4.82 (£5.78 UK, incl VAT)
2900-472
In physical computing it's sometimes nice to know how physically close you are to an object. In other words, you may need to know your 'proximity' to an...
2 item(s)
End of Line
+
Add to wish list

£13.55 £4.52 (£5.42 UK, incl VAT)
3801-322
The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high...
2 item(s)
End of Line
+
Add to wish list

£13.55 £4.52 (£5.42 UK, incl VAT)
2110-622
This is the SparkFun “Time-of-Flight” Range Finder, a breakout for the VL6180 distance sensor. Unlike most distance sensors that rely...
1 item(s)
End of Line
+
Add to wish list

£13.55 £4.52 (£5.42 UK, incl VAT)
2904-852
Description: This is the LilyPad revision of the FTDI Basic . It is the same as our other FTDI Basic, but has a purple LilyPad board which is half the...
1 item(s)
End of Line
+
Add to wish list

£13.49 £4.50 (£5.40 UK, incl VAT)
2109-168
This 16x LCD packs 32 characters into an outline smaller than that of most two-line displays. An LED backlight enables optimal viewing in all lighting...
1 item(s)
End of Line
+
Add to wish list

£12.24 £4.08 (£4.90 UK, incl VAT)
2109-205
A 20 character x 4 line LCD with yellow / green transflective LED backlighting. Low power consumption Alphanumeric character display Winstar...
1 item(s)
End of Line
+
Add to wish list

£8.03 £4.02 (£4.82 UK, incl VAT)
1615-101
This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of...
1 item(s)
End of Line
+
Add to wish list

£12.05 £4.02 (£4.82 UK, incl VAT)
2109-171
Description: This is a basic 16 character by 2 line display with a Black background and a Red backlight. Utilizes the extremely common HD44780 parallel...
2 item(s)
End of Line
+
Add to wish list

£7.53 £4.02 (£4.82 UK, incl VAT)
2900-469
If you need to charge LiPo batteries, this simple charger will do just that. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the...
11 item(s)
End of Line
+
Add to wish list

£12.05 £4.02 (£4.82 UK, incl VAT)
3807-427
Description: Riding on the waves of the very popular Arduino USB board is this small prototyping shield. Originally spawned with collaboration between the...
1 item(s)
End of Line
+
Add to wish list

£12.05 £4.02 (£4.82 UK, incl VAT)
2900-632
The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal...
2 item(s)
End of Line
+
Add to wish list

£6.78 £3.61 (£4.33 UK, incl VAT)
2110-802
Description: LED Matrix with Bright-Red and Bright-Green LEDs. This medium matrix has 64 Red/Green LEDs built into one common cathode housing. Unit...
2 item(s)
End of Line
+
Add to wish list

£6.78 £3.61 (£4.33 UK, incl VAT)
2900-457
The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right. This breakout board makes...
5 item(s)
End of Line
+
Add to wish list

£10.37 £3.46 (£4.15 UK, incl VAT)
2109-167
This 16 character x 2 line LCD packs 32 characters into an outline smaller than that of most two-line displays. This unit uses the HD44780 interface found...
2 item(s)
End of Line
+
Add to wish list

£5.95 £3.17 (£3.80 UK, incl VAT)
3811-020
Description: MOSFETs are awesome. They're like a switch that you flip electronically! This MOSFET Power Controller makes it easy to switch a battery...
2 item(s)
End of Line
+
Add to wish list

£9.03 £3.01 (£3.61 UK, incl VAT)
3810-040
Description: This is a handy little Bluetooth USB mini-adapter. This adapter supports Bluetooth v2.0 class 1 and has a maximum distance of up to 100m. The...
1 item(s)
End of Line
+
Add to wish list

£5.27 £2.81 (£3.37 UK, incl VAT)
2110-053
Description: Every laser needs a holder! This custom designed plastic mount fits the SparkFun flat laser modules. Insert the module into the mount and the...
1 item(s)
End of Line
+
Add to wish list

£5.27 £2.81 (£3.37 UK, incl VAT)
1500-002
Description: This analog panel meter measures DC current from 0-20mA with 5% accuracy. It has a clear and easy to read scale and an adjustable dial. These...
2 item(s)
End of Line
+
Add to wish list

£7.53 £2.51 (£3.01 UK, incl VAT)
3807-467
The Arduino Mega 2560 R3 is a very big and powerful microcontroller, needless to say, you want to keep it protected. Why not protect it with one of these...
3 item(s)
End of Line
+
Add to wish list

£7.53 £2.51 (£3.01 UK, incl VAT)
3808-011
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect it with one...
2 item(s)
End of Line
+
Add to wish list

£7.53 £2.51 (£3.01 UK, incl VAT)
3808-012
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect it with one...
2 item(s)
End of Line
+
Add to wish list

£7.53 £2.51 (£3.01 UK, incl VAT)
3808-013
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect it with one...
3 item(s)
End of Line
+
Add to wish list

£7.53 £2.51 (£3.01 UK, incl VAT)
2900-634
If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements,...
2 item(s)
End of Line
+
Add to wish list

£4.52 £2.41 (£2.89 UK, incl VAT)
1613-500
This is a tiny trackball akin to those found on a number of Blackberry models (8100, 8300, 8320, 8800, 8830, etc). Each of the four spindles have a tiny...
2 item(s)
End of Line
+
Add to wish list

£4.82 £2.41 (£2.89 UK, incl VAT)
1612-103
 Rotary encoders can be used similarly to potentiometers. The difference being that that an encoder has full rotation without limits (It just goes...
5 item(s)
End of Line
+
Add to wish list

£5.57 £1.86 (£2.23 UK, incl VAT)
2700-143
Description: This breakout board allows for standard surface mount, SMD and SMT, TQFP 44 pin packages with 25mil (0.8mm) spacing between pads. The PCB...
3 item(s)
End of Line
+
Add to wish list

£3.47 £1.85 (£2.22 UK, incl VAT)
2110-620
This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to...
3 item(s)
End of Line
+
Add to wish list

£5.27 £1.76 (£2.11 UK, incl VAT)
2904-840
Description: If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick. It's a...
4 item(s)
End of Line
+
Add to wish list

£3.01 £1.61 (£1.93 UK, incl VAT)
2900-473
This is a breakout board for the built in WS2812 RGB LED. The WS2812 is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins...
8 item(s)
End of Line
+
Add to wish list

£3.01 £1.61 (£1.93 UK, incl VAT)
2900-604
Based on the Controllable Power Outlet Tutorial, this is the bare PCB from Sparkfun COM-09096 that allows you to switch high voltages with a simple 0 to 5V...
4 item(s)
End of Line
+
Add to wish list

£4.52 £1.51 (£1.81 UK, incl VAT)
2900-458
Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don't. Sensor acts like a transistor - the greater the incoming...
6 item(s)
End of Line
+
Add to wish list

£4.52 £1.51 (£1.81 UK, incl VAT)
2904-820
Description: A simple, very bright, 250mcd, white LED LilyPad. Light up the night! 5 pcs. LilyPad is a wearable e-textile technology developed by Leah...
3 item(s)
End of Line
+
Add to wish list

£4.52 £1.51 (£1.81 UK, incl VAT)
3812-004
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications....
2 item(s)
End of Line
+
Add to wish list

£4.52 £1.51 (£1.81 UK, incl VAT)
2904-841
Description: This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. LilyPad is a...
4 item(s)
End of Line
+
Add to wish list

£8.28 £1.38 (£1.66 UK, incl VAT)
1062-053
These adjustable buck (step-down) voltage regulators from Pololu generate lower, user-adjustable output voltages from a wide input voltage range of 4.5 to...
Currently Unavailable
Discontinued Product

£2.26 £1.20 (£1.44 UK, incl VAT)
1613-448
This is a simple LED-illuminated tactile button with a red cap. It's just like a basic tactile button, but it lights up red! So now you can get visual...
4 item(s)
End of Line
+
Add to wish list

£2.26 £1.20 (£1.44 UK, incl VAT)
2900-079
This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector, center positive. This cable allows the user to use a USB port on a...
137 item(s)
End of Line
+
Add to wish list

£3.82 £1.19 (£1.43 UK, incl VAT)
1601-034
These are massive Single Pull - Single Throw (SPST) Normally Open (NO) sealed relays from Potter and Brumfield. Use them to switch high voltage/high current...
6 item(s)
End of Line
+
Add to wish list

£3.39 £1.13 (£1.36 UK, incl VAT)
3812-003
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications....
4 item(s)
End of Line
+
Add to wish list

£3.01 £1.00 (£1.20 UK, incl VAT)
3807-406
Description: This is a small prototyping shield for the Arduino Pro Mini. If your project requires just a little bit more space for your external...
4 item(s)
End of Line
+
Add to wish list

£1.61 £0.80 (£0.96 UK, incl VAT)
2110-578
These 5mm RGB (red, green, blue) units have four pins: one for each color and a common anode. Use this one LED for three status indicators or pulse width...
8 item(s)
End of Line
+
Add to wish list

£1.37 £0.78 (£0.94 UK, incl VAT)
2110-709
A 5-LED array in a 10-pin in-line package, with white segments, yellow LEDs and a black border. LED size 1.25 x 5mm.   Downloads Datasheets
3 item(s)
End of Line
+
Add to wish list

£2.11 £0.70 (£0.84 UK, incl VAT)
3810-030
Ethernet is now ubiquitous with embedded systems. Before you can get your set-top box on the internet, you'll need one of these single port, RJ45 ethernet...
11 item(s)
End of Line
+
Add to wish list

£1.80 £0.60 (£0.72 UK, incl VAT)
1601-031
Relay PCB Automotive 30A, coil: 24Vdc Specially designed for automotive use with heavy duty construction enables them to switch the heavier loads required...
4 item(s)
End of Line
+
Add to wish list

£1.51 £0.50 (£0.60 UK, incl VAT)
3812-001
This is a basic RFID tag used for presence sensing, etc. Works in the 125kHz RF range. These tags come with a unique 32-bit ID and are not re-programmable....
5 item(s)
End of Line
+
Add to wish list

£1.51 £0.50 (£0.60 UK, incl VAT)
2110-174
Huge 10mm through hole LEDs. Mood-light an entire wall!   Specification Colour Wavelength (nm) Lum. Int. (mcd) @...
5 item(s)
End of Line
+
Add to wish list

£1.51 £0.50 (£0.60 UK, incl VAT)
2900-627
Description: Why not prototype in 3D? The SparkFun Penta-shape is a roughly 1" wide penta-shaped board with 0.1" spaced holes. Use it to create different...
4 item(s)
End of Line
+
Add to wish list

£0.75 £0.40 (£0.48 UK, incl VAT)
2110-100
These are the same RGB LEDs that are used for the WS2801 breakout board. They're great when you need a lot of color from not a lot of board space....
79 item(s)
End of Line
+

Minimum quantity for "LED - SMD RGB" is 2.

Add to wish list

£0.75 £0.40 (£0.48 UK, incl VAT)
2109-351
This is the SMD connector for the Nintendo DS touch screen, see related products below. 4-pin right angle ZIF connector at 0.5 mm pitch. Also available ready...
9 item(s)
End of Line
+

Minimum quantity for "Nintendo DS Touch Screen Connector" is 3.

Add to wish list

£0.96 £0.38 (£0.46 UK, incl VAT)
2800-535
An ABS box for general project use, supplied complete with cover fixing screws. Dimensions in the title is the external size 48x23.4x16.4mm, and internal...
31 item(s)
End of Line
+

Minimum quantity for "Technobots Standard Box Size 3 48x23.4x16.4mm" is 2.

Add to wish list

£0.45 £0.35 (£0.42 UK, incl VAT)
1613-002
Non-latching push button action Rated 250mA 125V AC Panel hole diameter 7mm Overall dimensions 28mm long, 10.5mm diameter
83 item(s)
End of Line
+
Add to wish list

£0.84 £0.34 (£0.41 UK, incl VAT)
2800-534
An ABS box for general project use, supplied complete with cover fixing screws. Dimensions in the title is the external size 41x20x14.2mm, and...
40 item(s)
End of Line
+

Minimum quantity for "Technobots Standard Box Size 2 41x20x14.2mm" is 2.

Add to wish list

£0.40 £0.30 (£0.36 UK, incl VAT)
2100-052
Supplied in packs of 10 diodes Description DIODE, SMALL SIGNAL DO-35 Forward Current If(AV):100mA Forward Surge Current Ifsm Max:500mA...
7 item(s)
End of Line
+

Minimum quantity for "10 off BAW62 Signal Diode" is 2.

Add to wish list

£0.40 £0.30 (£0.36 UK, incl VAT)
2100-056
Supplied in packs of 10 diodes Description DIODE, SMALL SIGNAL DO-35 Forward Current If(AV):250mA Forward Surge Current Ifsm Max:1A Forward...
9 item(s)
End of Line
+

Minimum quantity for "10 off BAV20 Signal Diode" is 2.

Add to wish list

£0.72 £0.29 (£0.35 UK, incl VAT)
2800-533
An ABS box for general project use, supplied complete with cover fixing screws. Dimensions in the title is the external size 36x18x12.9mm, and internal...
41 item(s)
End of Line
+

Minimum quantity for "Technobots Standard Box Size 1 36x18x12.9mm" is 2.

Add to wish list

£0.56 £0.28 (£0.34 UK, incl VAT)
2110-514
This is a very basic 5mm purple LED that we feel is more violet than purple. It has a typical forward voltage of 3.4V and a rated forward current of 30mA.
9 item(s)
End of Line
+

Minimum quantity for "5mm LED Purple (Violet-ish) " is 3.

Add to wish list

£0.36 £0.27 (£0.32 UK, incl VAT)
2000-724
A miniature single turn cermet potentiometers, sealed to withstand industrial cleaning solvents and harsh environments with moulded PCB stand offs....
12 item(s)
End of Line
+

Minimum quantity for "Miniature Enclosed Vertical Preset 2k" is 2.

Add to wish list

£0.80 £0.25 (£0.30 UK, incl VAT)
2110-531
These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. All lenses are clear.   Specification...
7 item(s)
End of Line
+
Add to wish list

£0.43 £0.23 (£0.28 UK, incl VAT)
2110-454
22 item(s)
End of Line
+

Minimum quantity for "10mm Recessed LED Bezel" is 2.

Add to wish list

£0.39 £0.21 (£0.25 UK, incl VAT)
2100-315
Miniature glass passivated single phase bridge rectifier with a forward current of 1A maximum. VRRM 800V, VF 1.1V.
21 item(s)
End of Line
+

Minimum quantity for "Bridge Rectifier 1A 800V DIL-4 DF08" is 3.

Add to wish list

£0.40 £0.20 (£0.24 UK, incl VAT)
1613-432
This right-angle tactile switch has a great 'click' to it. Also, because it's a through-hole design it's very sturdy. Mount it on the edge of your board for...
23 item(s)
End of Line
+

Minimum quantity for "Right Angle Tactile Button" is 4.

Add to wish list

£0.38 £0.20 (£0.24 UK, incl VAT)
2110-184
Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.   Specification...
14 item(s)
End of Line
+

Minimum quantity for "Diffused LED - Green 10mm" is 2.

Add to wish list

£0.38 £0.20 (£0.24 UK, incl VAT)
2110-546
These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. All lenses are clear.   Specification...
44 item(s)
End of Line
+
Add to wish list