T2.5x6mm Timing Pulleys
These T2.5 pulleys are provided as blanks where there is either no hole bored or a pilot bore is provided. This allows you to apply your own fixing method to the shaft. A common approach is to drill and tap the boss for grub screw fixing to the shaft. Made from Aluminium with Zinc plated steel flanges as appropriate. Use only with T2.5 x 6mm wide timing belts. Dimensions subject to change and in some cases the pulley may be supplied without a bored hole even when there is one indicated in the table above. Contact us to confirm availability if you specifically require a pulley with a ready bored hole.
| Dimensions (Note bore subject to change) | |||||||||||||
| Part No. | Type | Teeth | Dp | De | Df | Dm | F | L | Bore d | Stocked | |||
| 4620-110 | 0F | 10 | 8.05 | 7.45 | 13 | 13 | 9 | 16 | No | Yes | |||
| 4620-112 | 0F | 12 | 9.6 | 9 | 13 | 13 | 9 | 16 | No | Yes | |||
| 4620-114 | 0F | 14 | 11.2 | 10.6 | 15 | 15 | 9 | 16 | No | Yes | |||
| 4620-115 | 0F | 15 | 12 | 11.4 | 15 | 15 | 9 | 16 | No | Yes | |||
| 4620-116 | 0F | 16 | 12.8 | 12.2 | 16 | 16 | 9 | 16 | No | Yes | |||
| 4620-118 | 1F | 18 | 14.4 | 13.8 | 17.5 | 10 | 10 | 16 | No | Yes | |||
| 4620-119 | 1F | 19 | 15.2 | 14.6 | 20 | 10 | 10 | 16 | No | Yes | |||
| 4620-120 | 1F | 20 | 16 | 15.4 | 20 | 11 | 10 | 16 | No | Yes | |||
| 4620-122 | 1F | 22 | 17.6 | 17 | 22 | 11 | 10 | 16 | No | Yes | |||
| 4620-124 | 1F | 24 | 19.15 | 18.55 | 22 | 12 | 10 | 16 | No | Yes | |||
| 4620-125 | 1F | 25 | 19.95 | 19.35 | 25 | 12 | 10 | 16 | 4 | Yes | |||
| 4620-126 | 1F | 26 | 20.75 | 20.15 | 26 | 14 | 10 | 16 | 4 | Yes | |||
| 4620-128 | 1F | 28 | 22.35 | 21.75 | 26 | 14 | 10 | 16 | 4 | Yes | |||
| 4620-130 | 1F | 30 | 23.95 | 23.35 | 26 | 16 | 10 | 16 | 6 | Yes | |||
| 4620-132 | 1F | 32 | 25.55 | 24.95 | 32 | 16 | 10 | 16 | 6 | Yes | |||
| 4620-136 | 1F | 36 | 28.75 | 28.10 | 36 | 20 | 10 | 16 | 6 | Yes | |||
| 4620-140 | 1F | 40 | 31.90 | 31.30 | 38 | 22 | 10 | 16 | 6 | Yes | |||