No data found

Close

Categories

Breakout Boards

Sort by Position: Low to High
50 Per Page
Save 47%
IR Receiver Breakout Board
IR Receiver Breakout Board
£9.03 £4.82 (£5.78 UK, incl VAT)
2900-434
Description: This is a very small infrared receiver based on the TSOP85 receiver from Vishay. This receiver has all the filtering and 38kHz demodulation...
1 item(s)
End of Line
+ −
Add to wish list
Save 47%
RPI-1031 Tilt-a-Whirl Breakout
RPI-1031 Tilt-a-Whirl Breakout
£6.78 £3.61 (£4.33 UK, incl VAT)
2900-457
The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right. This breakout board makes...
4 item(s)
End of Line
+ −
Add to wish list
Save 67%
TEMT6000 Breakout Board
TEMT6000 Breakout Board
£4.52 £1.51 (£1.81 UK, incl VAT)
2900-458
Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don't. Sensor acts like a transistor - the greater the incoming...
6 item(s)
End of Line
+ −
Add to wish list
Save 47%
LiPo Charger Basic - Mini-USB
LiPo Charger Basic - Mini-USB
£7.53 £4.02 (£4.82 UK, incl VAT)
2900-469
If you need to charge LiPo batteries, this simple charger will do just that. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the...
11 item(s)
End of Line
+ −
Add to wish list
Save 47%
VCNL4000 Infrared Emitter Breakout
VCNL4000 Infrared Emitter Breakout
£9.03 £4.82 (£5.78 UK, incl VAT)
2900-472
In physical computing it's sometimes nice to know how physically close you are to an object. In other words, you may need to know your 'proximity' to an...
2 item(s)
End of Line
+ −
Add to wish list
Save 47%
WS2812 RGB LED Breakout Board
WS2812 RGB LED Breakout Board
£3.01 £1.61 (£1.93 UK, incl VAT)
2900-473
This is a breakout board for the built in WS2812 RGB LED. The WS2812 is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins...
4 item(s)
End of Line
+ −
Add to wish list
Save 47%
Relay Control Breakout Board Bare PCB
Relay Control Breakout Board Bare PCB
£3.01 £1.61 (£1.93 UK, incl VAT)
2900-604
Based on the Controllable Power Outlet Tutorial, this is the bare PCB from Sparkfun COM-09096 that allows you to switch high voltages with a simple 0 to 5V...
4 item(s)
End of Line
+ −
Add to wish list
Save 66%
Pololu MQ Gas Sensor Carrier Bare PCB
Pololu MQ Gas Sensor Carrier Bare PCB
£1.16 £0.39 (£0.47 UK, incl VAT)
2900-606
This breakout board is designed to work with any of the MQ-series gas sensors, simplifying the interface from 6 to 3 pins - ground, +5V VCC, and an analog...
6 item(s)
End of Line
+ −

Minimum quantity for "Pololu MQ Gas Sensor Carrier Bare PCB" is 2.

Add to wish list
Save 67%
ProtoBoard - Penta-shape
ProtoBoard - Penta-shape
£1.51 £0.50 (£0.60 UK, incl VAT)
2900-627
Description: Why not prototype in 3D? The SparkFun Penta-shape is a roughly 1" wide penta-shaped board with 0.1" spaced holes. Use it to create different...
4 item(s)
End of Line
+ −
Add to wish list
Save 67%
UV Sensor Breakout Board - ML8511
UV Sensor Breakout Board - ML8511
£12.05 £4.02 (£4.82 UK, incl VAT)
2900-632
The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal...
2 item(s)
End of Line
+ −
Add to wish list
Save 67%
ISL29125 RGB Light Sensor
ISL29125 RGB Light Sensor
£7.53 £2.51 (£3.01 UK, incl VAT)
2900-634
If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements,...
2 item(s)
End of Line
+ −
Add to wish list