Search resultsProducts found: 104

$10.26 $5.48 ($6.57 UK, incl VAT)
2900-434
Description: This is a very small infrared receiver based on the TSOP85 receiver from Vishay. This receiver has all the filtering and 38kHz demodulation...
1 item(s)
End of Line
+
Add to wish list

$7.70 $4.10 ($4.92 UK, incl VAT)
2900-457
The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right. This breakout board makes...
5 item(s)
End of Line
+
Add to wish list

$5.14 $1.72 ($2.06 UK, incl VAT)
2900-458
Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don't. Sensor acts like a transistor - the greater the incoming...
6 item(s)
End of Line
+
Add to wish list

$8.56 $4.57 ($5.48 UK, incl VAT)
2900-469
If you need to charge LiPo batteries, this simple charger will do just that. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the...
11 item(s)
End of Line
+
Add to wish list

$10.26 $5.48 ($6.57 UK, incl VAT)
2900-472
In physical computing it's sometimes nice to know how physically close you are to an object. In other words, you may need to know your 'proximity' to an...
2 item(s)
End of Line
+
Add to wish list

$3.42 $1.83 ($2.19 UK, incl VAT)
2900-473
This is a breakout board for the built in WS2812 RGB LED. The WS2812 is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins...
8 item(s)
End of Line
+
Add to wish list

$3.42 $1.83 ($2.19 UK, incl VAT)
2900-604
Based on the Controllable Power Outlet Tutorial, this is the bare PCB from Sparkfun COM-09096 that allows you to switch high voltages with a simple 0 to 5V...
4 item(s)
End of Line
+
Add to wish list

$1.72 $0.57 ($0.68 UK, incl VAT)
2900-627
Description: Why not prototype in 3D? The SparkFun Penta-shape is a roughly 1" wide penta-shaped board with 0.1" spaced holes. Use it to create different...
4 item(s)
End of Line
+
Add to wish list

$5.14 $1.72 ($2.06 UK, incl VAT)
2904-820
Description: A simple, very bright, 250mcd, white LED LilyPad. Light up the night! 5 pcs. LilyPad is a wearable e-textile technology developed by Leah...
3 item(s)
End of Line
+
Add to wish list

$5.99 $2.00 ($2.40 UK, incl VAT)
2904-840
Description: If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick. It's a...
4 item(s)
End of Line
+
Add to wish list

$22.24 $7.41 ($8.89 UK, incl VAT)
2904-851
Description: This is the LilyPad Arduino Simple Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad...
2 item(s)
End of Line
+
Add to wish list

$15.40 $8.22 ($9.86 UK, incl VAT)
3340-021
Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of...
2 item(s)
End of Line
+
Add to wish list

$20.53 $10.95 ($13.15 UK, incl VAT)
3340-025
This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input...
2 item(s)
End of Line
+
Add to wish list

$68.44 $22.82 ($27.39 UK, incl VAT)
3340-204
This is a simple breakout for the ADXL345 accelerometer and the ITG-3200 gyro. With this board, you get a full 6 degrees of freedom. The sensors communicate...
1 item(s)
End of Line
+
Add to wish list

$102.66 $34.22 ($41.06 UK, incl VAT)
3340-206
The 9DOF Sensor stick is a very small sensor board with 9 degrees of freedom. It includes the ADXL345 accelerometer, the HMC5883L magnetometer, and the...
1 item(s)
End of Line
+
Add to wish list

$34.22 $18.25 ($21.90 UK, incl VAT)
3801-017
The LSM303DLH is a triple axis accelerometer combined with a triple axis magnetic sensor. This breakout board uses the LSM303DLH to give a you the data you...
1 item(s)
End of Line
+
Add to wish list

$12.83 $6.84 ($8.20 UK, incl VAT)
3801-032
Zilog's ePIR is a fully functional motion-detecting single-board computer (SBC). Combined on this board are a Z8 Encore! XP MCU, and a Murata passive...
1 item(s)
End of Line
+
Add to wish list

$0.31 $0.18 ($0.22 UK, incl VAT)
3801-140
NTC Thermistor 1k
14 item(s)
End of Line
+

Minimum quantity for "NTC Thermistor 1k" is 4.

Add to wish list

$0.31 $0.18 ($0.22 UK, incl VAT)
3801-150
NTC Thermistor 20k
31 item(s)
End of Line
+

Minimum quantity for "NTC Thermistor 20k" is 4.

Add to wish list

$23.61 $18.90 ($22.68 UK, incl VAT)
3801-230
This gyroscope board is a basic carrier/breakout board for the ST LPR510AL dual-axis gyro, which measures the angular rates of rotation about the pitch (x)...
1 item(s)
End of Line
+
Add to wish list

$15.40 $5.14 ($6.16 UK, incl VAT)
3801-322
The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high...
2 item(s)
End of Line
+
Add to wish list

$35.93 $11.98 ($14.38 UK, incl VAT)
3804-035
Description: This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to...
1 item(s)
End of Line
+
Add to wish list

$18.82 $6.27 ($7.52 UK, incl VAT)
3804-045
This module from Roving Networks is powerful, small, and very easy to use. This Bluetooth module is designed to replace serial cables. The Bluetooth stack...
1 item(s)
End of Line
+
Add to wish list

$13.69 $4.57 ($5.48 UK, incl VAT)
3807-427
Description: Riding on the waves of the very popular Arduino USB board is this small prototyping shield. Originally spawned with collaboration between the...
1 item(s)
End of Line
+
Add to wish list

$59.89 $19.97 ($23.95 UK, incl VAT)
3807-437
Description: This is an Arduino shield with pogo pin connectors for each and every GPIO. It's essentially the same rig that Sparkfun use to...
1 item(s)
End of Line
+
Add to wish list

$25.67 $8.56 ($10.27 UK, incl VAT)
3807-444
Description: If you use the SparkFun Inventors Kit (see related products below) in a classroom or workshop setting, you know that when a bunch of...
3 item(s)
End of Line
+
Add to wish list

$27.23 $9.08 ($10.90 UK, incl VAT)
3807-447
Description: This shield allows you to interface Wixel wireless modules to your Arduino (and other compatible products), enabling simple wireless...
2 item(s)
End of Line
+
Add to wish list

$8.56 $2.85 ($3.42 UK, incl VAT)
3807-467
The Arduino Mega 2560 R3 is a very big and powerful microcontroller, needless to say, you want to keep it protected. Why not protect it with one of these...
3 item(s)
End of Line
+
Add to wish list

$8.56 $2.85 ($3.42 UK, incl VAT)
3808-011
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect it with one...
2 item(s)
End of Line
+
Add to wish list

$8.56 $2.85 ($3.42 UK, incl VAT)
3808-012
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect it with one...
2 item(s)
End of Line
+
Add to wish list

$8.56 $2.85 ($3.42 UK, incl VAT)
3808-013
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect it with one...
3 item(s)
End of Line
+
Add to wish list

$30.80 $10.26 ($12.32 UK, incl VAT)
3808-400
Description: The Raspberry Pi packs plenty of processing power in a small and inexpensive package and that makes it perfect for robot brains! The only...
1 item(s)
End of Line
+
Add to wish list

$2.40 $0.80 ($0.95 UK, incl VAT)
3810-030
Ethernet is now ubiquitous with embedded systems. Before you can get your set-top box on the internet, you'll need one of these single port, RJ45 ethernet...
11 item(s)
End of Line
+
Add to wish list

$10.26 $3.42 ($4.10 UK, incl VAT)
3810-040
Description: This is a handy little Bluetooth USB mini-adapter. This adapter supports Bluetooth v2.0 class 1 and has a maximum distance of up to 100m. The...
1 item(s)
End of Line
+
Add to wish list

$3.85 $1.28 ($1.55 UK, incl VAT)
3812-003
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications....
4 item(s)
End of Line
+
Add to wish list

$5.14 $1.72 ($2.06 UK, incl VAT)
3812-004
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications....
2 item(s)
End of Line
+
Add to wish list

$11.98 $6.39 ($7.66 UK, incl VAT)
3813-030
This load sensor is the same one found in digital bathroom scales (you know, the ones you use in January for your New Year's resolutions, and then forget...
2 item(s)
End of Line
+
Add to wish list

$59.89 $19.97 ($23.95 UK, incl VAT)
3813-101
Fingerprint scanners are awesome. Why use a key when you have one right at the tip of your finger? Unfortunately, they're usually unreliable or difficult...
1 item(s)
End of Line
+
Add to wish list

$15.40 $5.14 ($6.16 UK, incl VAT)
2110-622
This is the SparkFun “Time-of-Flight” Range Finder, a breakout for the VL6180 distance sensor. Unlike most distance sensors that rely...
1 item(s)
End of Line
+
Add to wish list

$5.99 $3.19 ($3.83 UK, incl VAT)
1500-002
Description: This analog panel meter measures DC current from 0-20mA with 5% accuracy. It has a clear and easy to read scale and an adjustable dial. These...
2 item(s)
End of Line
+
Add to wish list

$0.42 $0.10 ($0.13 UK, incl VAT)
2000-154
Precision metal film resistor offering high precision coupled with very high stability. Light blue body colour with 5 band colour coding all supplied in a...
10 item(s)
Discontinued Product
+
Add to wish list

$0.64 $0.32 ($0.39 UK, incl VAT)
2110-514
This is a very basic 5mm purple LED that we feel is more violet than purple. It has a typical forward voltage of 3.4V and a rated forward current of 30mA.
9 item(s)
End of Line
+

Minimum quantity for "5mm LED Purple (Violet-ish) " is 3.

Add to wish list

$13.69 $4.57 ($5.48 UK, incl VAT)
2900-632
The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal...
2 item(s)
End of Line
+
Add to wish list

$8.56 $2.85 ($3.42 UK, incl VAT)
2900-634
If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements,...
2 item(s)
End of Line
+
Add to wish list

$5.14 $1.72 ($2.06 UK, incl VAT)
2904-841
Description: This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. LilyPad is a...
4 item(s)
End of Line
+
Add to wish list

$15.40 $5.14 ($6.16 UK, incl VAT)
2904-852
Description: This is the LilyPad revision of the FTDI Basic . It is the same as our other FTDI Basic, but has a purple LilyPad board which is half the...
1 item(s)
End of Line
+
Add to wish list

$17.11 $5.70 ($6.84 UK, incl VAT)
2904-860
Description: The is a breakout board for the popular XBee modules. Board includes easy-to-sew tabs and all the necessary power regulation to run on the...
2 item(s)
End of Line
+
Add to wish list

$3.42 $1.14 ($1.36 UK, incl VAT)
3807-406
Description: This is a small prototyping shield for the Arduino Pro Mini. If your project requires just a little bit more space for your external...
4 item(s)
End of Line
+
Add to wish list

$15.40 $8.22 ($9.86 UK, incl VAT)
3807-461
The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED display. This USB...
1 item(s)
End of Line
+
Add to wish list

$6.76 $3.60 ($4.32 UK, incl VAT)
3811-020
Description: MOSFETs are awesome. They're like a switch that you flip electronically! This MOSFET Power Controller makes it easy to switch a battery...
2 item(s)
End of Line
+
Add to wish list