No data found

Close

Product filters Product filters

Price

Search resultsProducts found: 95

Sort by Position: Low to High
24 Per Page
Save 47%
WS2812 RGB LED Breakout Board
WS2812 RGB LED Breakout Board
€3.46 €1.85 (€2.22 UK, incl VAT)
2900-473
This is a breakout board for the built in WS2812 RGB LED. The WS2812 is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins...
8 item(s)
End of Line
+ −
Add to wish list
Save 47%
Relay Control Breakout Board Bare PCB
Relay Control Breakout Board Bare PCB
€3.46 €1.85 (€2.22 UK, incl VAT)
2900-604
Based on the Controllable Power Outlet Tutorial, this is the bare PCB from Sparkfun COM-09096 that allows you to switch high voltages with a simple 0 to 5V...
4 item(s)
End of Line
+ −
Add to wish list
Save 67%
ProtoBoard - Penta-shape
ProtoBoard - Penta-shape
€1.74 €0.57 (€0.69 UK, incl VAT)
2900-627
Description: Why not prototype in 3D? The SparkFun Penta-shape is a roughly 1" wide penta-shaped board with 0.1" spaced holes. Use it to create different...
4 item(s)
End of Line
+ −
Add to wish list
Save 67%
LilyPad LED White (5pcs)
LilyPad LED White (5pcs)
€5.20 €1.74 (€2.08 UK, incl VAT)
2904-820
Description: A simple, very bright, 250mcd, white LED LilyPad. Light up the night! 5 pcs. LilyPad is a wearable e-textile technology developed by Leah...
3 item(s)
End of Line
+ −
Add to wish list
Save 67%
LilyPad Coin Cell Battery Holder
LilyPad Coin Cell Battery Holder
€6.06 €2.02 (€2.43 UK, incl VAT)
2904-840
Description: If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick. It's a...
4 item(s)
End of Line
+ −
Add to wish list
Save 67%
LilyPad Arduino Simple Board
LilyPad Arduino Simple Board
€22.49 €7.49 (€8.99 UK, incl VAT)
2904-851
Description: This is the LilyPad Arduino Simple Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad...
2 item(s)
End of Line
+ −
Add to wish list
Save 47%
Sparkfun 3-Axis 3g ADXL335 Accelerometer
Sparkfun 3-Axis 3g ADXL335 Accelerometer
€15.57 €8.31 (€9.98 UK, incl VAT)
3340-021
Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of...
2 item(s)
End of Line
+ −
Add to wish list
Save 47%
Triple Axis Accelerometer Breakout - MMA7361
Triple Axis Accelerometer Breakout - MMA7361
€20.77 €11.08 (€13.30 UK, incl VAT)
3340-025
This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input...
2 item(s)
End of Line
+ −
Add to wish list
Save 67%
IMU Digital Combo Board-6 Deg ITG3200/ADXL345
IMU Digital Combo Board-6 Deg ITG3200/ADXL345
€69.23 €23.08 (€27.70 UK, incl VAT)
3340-204
This is a simple breakout for the ADXL345 accelerometer and the ITG-3200 gyro. With this board, you get a full 6 degrees of freedom. The sensors communicate...
1 item(s)
End of Line
+ −
Add to wish list
Save 67%
9 Degrees of Freedom - Sensor Stick
9 Degrees of Freedom - Sensor Stick
€103.84 €34.61 (€41.53 UK, incl VAT)
3340-206
The 9DOF Sensor stick is a very small sensor board with 9 degrees of freedom. It includes the ADXL345 accelerometer, the HMC5883L magnetometer, and the...
1 item(s)
End of Line
+ −
Add to wish list
Save 47%
LSM303 Breakout Board - Tilt Compensated Compass
LSM303 Breakout Board - Tilt Compensated Compass
€34.61 €18.46 (€22.15 UK, incl VAT)
3801-017
The LSM303DLH is a triple axis accelerometer combined with a triple axis magnetic sensor. This breakout board uses the LSM303DLH to give a you the data you...
1 item(s)
End of Line
+ −
Add to wish list
Save 47%
ePIR Motion Detection Zdots Single Board Computer
ePIR Motion Detection Zdots Single Board Computer
€12.98 €6.92 (€8.30 UK, incl VAT)
3801-032
Zilog's ePIR is a fully functional motion-detecting single-board computer (SBC). Combined on this board are a Z8 Encore! XP MCU, and a Murata passive...
1 item(s)
End of Line
+ −
Add to wish list
Save 41%
NTC Thermistor 1k
NTC Thermistor 1k
€0.31 €0.18 (€0.22 UK, incl VAT)
3801-140
NTC Thermistor 1k
14 item(s)
End of Line
+ −

Minimum quantity for "NTC Thermistor 1k" is 4.

Add to wish list
Save 41%
NTC Thermistor 20k
NTC Thermistor 20k
€0.31 €0.18 (€0.22 UK, incl VAT)
3801-150
NTC Thermistor 20k
31 item(s)
End of Line
+ −

Minimum quantity for "NTC Thermistor 20k" is 4.

Add to wish list
Save 33%
Pololu LPR510AL Pitch & Roll 100/400 Gyro
Pololu LPR510AL Pitch & Roll 100/400 Gyro
€23.89 €15.93 (€19.11 UK, incl VAT)
3801-230
This gyroscope board is a basic carrier/breakout board for the ST LPR510AL dual-axis gyro, which measures the angular rates of rotation about the pitch (x)...
1 item(s)
End of Line
+ −
Add to wish list
Save 67%
MPL3115A2 Altitude / Pressure Sensor
MPL3115A2 Altitude / Pressure Sensor
€15.57 €5.20 (€6.23 UK, incl VAT)
3801-322
The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high...
2 item(s)
End of Line
+ −
Add to wish list
Save 67%
XBee 2mW Chip Antenna - Series 2 (ZB)
XBee 2mW Chip Antenna - Series 2 (ZB)
€36.34 €12.11 (€14.54 UK, incl VAT)
3804-035
Description: This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to...
1 item(s)
End of Line
+ −
Add to wish list
Save 67%
Bluetooth SMD Module - RN-42
Bluetooth SMD Module - RN-42
€19.03 €6.34 (€7.61 UK, incl VAT)
3804-045
This module from Roving Networks is powerful, small, and very easy to use. This Bluetooth module is designed to replace serial cables. The Bluetooth stack...
1 item(s)
End of Line
+ −
Add to wish list
Save 67%
Arduino ProtoShield Kit
Arduino ProtoShield Kit
€13.85 €4.62 (€5.54 UK, incl VAT)
3807-427
Description: Riding on the waves of the very popular Arduino USB board is this small prototyping shield. Originally spawned with collaboration between the...
1 item(s)
End of Line
+ −
Add to wish list
Save 67%
Uno Compatible Pogobed Kit for Shield Development
€60.57 €20.20 (€24.23 UK, incl VAT)
3807-437
Description: This is an Arduino shield with pogo pin connectors for each and every GPIO. It's essentially the same rig that Sparkfun use to...
1 item(s)
End of Line
+ −
Add to wish list
Save 67%
SparkFun Inventor's Kit Parts Refill Pack
SparkFun Inventor's Kit Parts Refill Pack
€25.97 €8.66 (€10.39 UK, incl VAT)
3807-444
Description: If you use the SparkFun Inventors Kit (see related products below) in a classroom or workshop setting, you know that when a bunch of...
3 item(s)
End of Line
+ −
Add to wish list
Save 67%
Wixel Shield for Arduino
Wixel Shield for Arduino
€27.54 €9.18 (€11.02 UK, incl VAT)
3807-447
Description: This shield allows you to interface Wixel wireless modules to your Arduino (and other compatible products), enabling simple wireless...
2 item(s)
End of Line
+ −
Add to wish list
Save 67%
Black Enclosure for Arduino Mega 2560 R3
Black Enclosure for Arduino Mega 2560 R3
€8.66 €2.89 (€3.46 UK, incl VAT)
3807-467
The Arduino Mega 2560 R3 is a very big and powerful microcontroller, needless to say, you want to keep it protected. Why not protect it with one of these...
3 item(s)
End of Line
+ −
Add to wish list
Save 67%
Blue Enclosure for the Raspberry Pi
Blue Enclosure for the Raspberry Pi
€8.66 €2.89 (€3.46 UK, incl VAT)
3808-011
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect it with one...
2 item(s)
End of Line
+ −
Add to wish list
 Prev
1 2 3 4
Next