Search resultsProducts found: 95

33.23 10.38 (12.46 UK, incl VAT)
2900-050
This is a stereo amplifier kit designed by Sparkfun BOB-00718 to make use of the STA540 power amplifier IC. Once this kit is completed you have a fully...
1 item(s)
End of Line
+
Add to wish list

103.84 34.61 (41.53 UK, incl VAT)
3807-425
D escription: The Cellular Shield for Arduino includes all the parts needed to interface your Arduino with an SM5100B cellular module. This allows you to...
1 item(s)
End of Line
+
Add to wish list

0.86 0.46 (0.55 UK, incl VAT)
2110-100
These are the same RGB LEDs that are used for the WS2801 breakout board. They're great when you need a lot of color from not a lot of board space....
79 item(s)
End of Line
+

Minimum quantity for "LED - SMD RGB" is 2.

Add to wish list

1.74 0.57 (0.69 UK, incl VAT)
3812-001
This is a basic RFID tag used for presence sensing, etc. Works in the 125kHz RF range. These tags come with a unique 32-bit ID and are not re-programmable....
5 item(s)
End of Line
+
Add to wish list

5.20 2.77 (3.32 UK, incl VAT)
1613-500
This is a tiny trackball akin to those found on a number of Blackberry models (8100, 8300, 8320, 8800, 8830, etc). Each of the four spindles have a tiny...
2 item(s)
End of Line
+
Add to wish list

2.07 0.69 (0.83 UK, incl VAT)
1601-031
Relay PCB Automotive 30A, coil: 24Vdc Specially designed for automotive use with heavy duty construction enables them to switch the heavier loads required...
4 item(s)
End of Line
+
Add to wish list

4.39 1.37 (1.64 UK, incl VAT)
1601-034
These are massive Single Pull - Single Throw (SPST) Normally Open (NO) sealed relays from Potter and Brumfield. Use them to switch high voltage/high current...
6 item(s)
End of Line
+
Add to wish list

5.54 2.77 (3.32 UK, incl VAT)
1612-103
 Rotary encoders can be used similarly to potentiometers. The difference being that that an encoder has full rotation without limits (It just goes...
5 item(s)
End of Line
+
Add to wish list

0.52 0.40 (0.48 UK, incl VAT)
1613-002
Non-latching push button action Rated 250mA 125V AC Panel hole diameter 7mm Overall dimensions 28mm long, 10.5mm diameter
83 item(s)
End of Line
+
Add to wish list

0.18 0.06 (0.07 UK, incl VAT)
1613-420
A switch supplied by Sparkfun COM-08229 as used for processor board resets etc.. Specification: 12V 50mA max Contact resistance 100mOhms max Travel...
32 item(s)
End of Line
+

Minimum quantity for "Tactile Switch Surface Mount 6x3x4.3mm" is 8.

Add to wish list

0.46 0.23 (0.28 UK, incl VAT)
1613-432
This right-angle tactile switch has a great 'click' to it. Also, because it's a through-hole design it's very sturdy. Mount it on the edge of your board for...
23 item(s)
End of Line
+

Minimum quantity for "Right Angle Tactile Button" is 4.

Add to wish list

2.60 1.38 (1.66 UK, incl VAT)
1613-448
This is a simple LED-illuminated tactile button with a red cap. It's just like a basic tactile button, but it lights up red! So now you can get visual...
4 item(s)
End of Line
+
Add to wish list

9.23 4.62 (5.54 UK, incl VAT)
1615-101
This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of...
1 item(s)
End of Line
+
Add to wish list

27.69 9.23 (11.08 UK, incl VAT)
1615-105
The MPR121 capacitive keypad uses the MPR121 and 12 touch sensitive pads to give you a simple 'keypad' with an I2C output. The board also has four mounting...
1 item(s)
End of Line
+
Add to wish list

0.41 0.31 (0.37 UK, incl VAT)
2000-724
A miniature single turn cermet potentiometers, sealed to withstand industrial cleaning solvents and harsh environments with moulded PCB stand offs....
12 item(s)
End of Line
+

Minimum quantity for "Miniature Enclosed Vertical Preset 2k" is 2.

Add to wish list

0.46 0.34 (0.41 UK, incl VAT)
2100-052
Supplied in packs of 10 diodes Description DIODE, SMALL SIGNAL DO-35 Forward Current If(AV):100mA Forward Surge Current Ifsm Max:500mA...
7 item(s)
End of Line
+

Minimum quantity for "10 off BAW62 Signal Diode" is 2.

Add to wish list

0.46 0.34 (0.41 UK, incl VAT)
2100-056
Supplied in packs of 10 diodes Description DIODE, SMALL SIGNAL DO-35 Forward Current If(AV):250mA Forward Surge Current Ifsm Max:1A Forward...
9 item(s)
End of Line
+

Minimum quantity for "10 off BAV20 Signal Diode" is 2.

Add to wish list

0.40 0.22 (0.26 UK, incl VAT)
2100-310
Miniature glass passivated single phase bridge rectifier with a forward current of 1A maximum. VRRM 600V, VF 1.1V.  
37 item(s)
End of Line
+

Minimum quantity for "Bridge Rectifier 1A 600V DIL-4 DF06" is 4.

Add to wish list

0.45 0.24 (0.29 UK, incl VAT)
2100-315
Miniature glass passivated single phase bridge rectifier with a forward current of 1A maximum. VRRM 800V, VF 1.1V.
21 item(s)
End of Line
+

Minimum quantity for "Bridge Rectifier 1A 800V DIL-4 DF08" is 3.

Add to wish list

86.54 46.15 (55.38 UK, incl VAT)
2109-160
Description: This is a very large serial graphic LCD. The Serial Graphic LCD backpack is soldered to the 160x128 pixel “Huge” Graphic LCD and...
1 item(s)
End of Line
+
Add to wish list

11.92 3.98 (4.77 UK, incl VAT)
2109-167
This 16 character x 2 line LCD packs 32 characters into an outline smaller than that of most two-line displays. This unit uses the HD44780 interface found...
2 item(s)
End of Line
+
Add to wish list

15.51 5.17 (6.21 UK, incl VAT)
2109-168
This 16x LCD packs 32 characters into an outline smaller than that of most two-line displays. An LED backlight enables optimal viewing in all lighting...
1 item(s)
End of Line
+
Add to wish list

13.85 4.62 (5.54 UK, incl VAT)
2109-171
Description: This is a basic 16 character by 2 line display with a Black background and a Red backlight. Utilizes the extremely common HD44780 parallel...
2 item(s)
End of Line
+
Add to wish list

23.68 7.90 (9.47 UK, incl VAT)
2109-204
20 characters x 4 line alphanumeric display module. Overall size 98 x 62 x 13mm (Images are not of this actual display but of the 20 x 2 line equivalent...
1 item(s)
End of Line
+
Add to wish list

14.07 4.69 (5.63 UK, incl VAT)
2109-205
A 20 character x 4 line LCD with yellow / green transflective LED backlighting. Low power consumption Alphanumeric character display Winstar...
1 item(s)
End of Line
+
Add to wish list

25.97 8.66 (10.39 UK, incl VAT)
2109-314
This is the latest evolution of the Sparkfun LCD-09393 serial LCD. Included on a single board is a 16x2 LCD and an embedded circuit based around a PIC 16F88....
1 item(s)
End of Line
+
Add to wish list

0.86 0.46 (0.55 UK, incl VAT)
2109-351
This is the SMD connector for the Nintendo DS touch screen, see related products below. 4-pin right angle ZIF connector at 0.5 mm pitch. Also available ready...
9 item(s)
End of Line
+

Minimum quantity for "Nintendo DS Touch Screen Connector" is 3.

Add to wish list

6.06 3.23 (3.87 UK, incl VAT)
2110-053
Description: Every laser needs a holder! This custom designed plastic mount fits the SparkFun flat laser modules. Insert the module into the mount and the...
1 item(s)
End of Line
+
Add to wish list

1.74 0.57 (0.69 UK, incl VAT)
2110-174
Huge 10mm through hole LEDs. Mood-light an entire wall!   Specification Colour Wavelength (nm) Lum. Int. (mcd) @...
5 item(s)
End of Line
+
Add to wish list

0.44 0.23 (0.28 UK, incl VAT)
2110-184
Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.   Specification...
14 item(s)
End of Line
+

Minimum quantity for "Diffused LED - Green 10mm" is 2.

Add to wish list

0.49 0.26 (0.32 UK, incl VAT)
2110-454
22 item(s)
End of Line
+

Minimum quantity for "10mm Recessed LED Bezel" is 2.

Add to wish list

0.92 0.29 (0.34 UK, incl VAT)
2110-531
These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. All lenses are clear.   Specification...
7 item(s)
End of Line
+
Add to wish list

0.44 0.23 (0.28 UK, incl VAT)
2110-546
These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. All lenses are clear.   Specification...
44 item(s)
End of Line
+
Add to wish list

0.30 0.15 (0.18 UK, incl VAT)
2110-563
4.8mm diffused package LED's mounted in a black ABS moulding meeting UL94V-0 flammability rating. End stackable to give a flush right angle mounting on...
13 item(s)
End of Line
+

Minimum quantity for "5mm PCB Mounting Dual RED LED" is 3.

Add to wish list

1.85 0.92 (1.10 UK, incl VAT)
2110-578
These 5mm RGB (red, green, blue) units have four pins: one for each color and a common anode. Use this one LED for three status indicators or pulse width...
8 item(s)
End of Line
+
Add to wish list

3.99 2.13 (2.55 UK, incl VAT)
2110-620
This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to...
3 item(s)
End of Line
+
Add to wish list

17.90 5.97 (7.16 UK, incl VAT)
2110-638
This quadrature encoder works with our Pololu micro metal gearmotors, 42×19mm wheel, and extended bracket to measure the rotation speed and direction...
1 item(s)
End of Line
+
Add to wish list

1.57 0.90 (1.08 UK, incl VAT)
2110-709
A 5-LED array in a 10-pin in-line package, with white segments, yellow LEDs and a black border. LED size 1.25 x 5mm.   Downloads Datasheets
3 item(s)
End of Line
+
Add to wish list

7.79 4.15 (4.98 UK, incl VAT)
2110-802
Description: LED Matrix with Bright-Red and Bright-Green LEDs. This medium matrix has 64 Red/Green LEDs built into one common cathode housing. Unit...
2 item(s)
End of Line
+
Add to wish list

34.61 11.54 (13.85 UK, incl VAT)
2110-803
This is the medium sized LED Matrix with a backpack from Sparkfun COM-00759 that has been designed to take SPI serial input and display any graphics you...
2 item(s)
End of Line
+
Add to wish list

14.71 7.85 (9.43 UK, incl VAT)
2110-820
Make your own LED Matrix with minimal soldering, suitable for any beginner! The kit will give you a great introduction to programming an LED Matrix. This...
2 item(s)
End of Line
+
Add to wish list

6.40 2.14 (2.56 UK, incl VAT)
2700-143
Description: This breakout board allows for standard surface mount, SMD and SMT, TQFP 44 pin packages with 25mil (0.8mm) spacing between pads. The PCB...
3 item(s)
End of Line
+
Add to wish list

2.60 1.38 (1.66 UK, incl VAT)
2900-079
This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector, center positive. This cable allows the user to use a USB port on a...
137 item(s)
End of Line
+
Add to wish list

10.38 5.54 (6.64 UK, incl VAT)
2900-434
Description: This is a very small infrared receiver based on the TSOP85 receiver from Vishay. This receiver has all the filtering and 38kHz demodulation...
1 item(s)
End of Line
+
Add to wish list

7.79 4.15 (4.98 UK, incl VAT)
2900-457
The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right. This breakout board makes...
5 item(s)
End of Line
+
Add to wish list

5.20 1.74 (2.08 UK, incl VAT)
2900-458
Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don't. Sensor acts like a transistor - the greater the incoming...
6 item(s)
End of Line
+
Add to wish list

8.66 4.62 (5.54 UK, incl VAT)
2900-469
If you need to charge LiPo batteries, this simple charger will do just that. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the...
11 item(s)
End of Line
+
Add to wish list

10.38 5.54 (6.64 UK, incl VAT)
2900-472
In physical computing it's sometimes nice to know how physically close you are to an object. In other words, you may need to know your 'proximity' to an...
2 item(s)
End of Line
+
Add to wish list

3.46 1.85 (2.22 UK, incl VAT)
2900-473
This is a breakout board for the built in WS2812 RGB LED. The WS2812 is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins...
8 item(s)
End of Line
+
Add to wish list

3.46 1.85 (2.22 UK, incl VAT)
2900-604
Based on the Controllable Power Outlet Tutorial, this is the bare PCB from Sparkfun COM-09096 that allows you to switch high voltages with a simple 0 to 5V...
4 item(s)
End of Line
+
Add to wish list