No data found

Close

Categories

Save 30%

Pololu 100:1 Micro Metal Gearmotor HP

List price: £21.73
£15.18
(£18.22 UK, incl VAT) You save: £6.55 (30%)
Price in points: 3036 points
1451-430
10 g
4 item(s)
End of Line
+ −
Add to wish list

This gearmotor is a miniature 24 x 12 x 10mm, low-current brushed DC motor with 100.37:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 9.3mm long, 3 mm-diameter D-shaped output shaft.

Key specs at 6 V: 310 RPM and 70 mA free-run, 1.7kg.cm (24 oz-in) and 1.6 A stall.

Customers also bought....

MOD 0.5, 10 Tooth Steel Model Gear
4905-010
MOD 0.5, 10 Tooth Steel Model Gear
£5.99 (£7.19 UK, incl VAT)
4905-010
MOD 0.5 steel gears that are narrower than our standard MOD 0.5 range and are pre-tapped 1 x M3 for easy shaft fixing MOD 0.5, 10 Tooth Steel Model Gear....
Out of stock
Save 21%
Pololu Wheel 42x19mm
4611-014
Pololu Wheel 42x19mm
£3.28 £2.60 (£3.12 UK, incl VAT)
4611-014
This custom-designed plastic wheel by Pololu has a rubber tyre measuring (42 mm) in diameter and is designed to fit the output shafts on our model geared...
15 item(s)
End of Line
Save 24%
Pololu Step-Up/Down 5V 1A Voltage Regulator S7V7F5
1062-043
Pololu Step-Up/Down 5V 1A Voltage Regulator S7V7F5
£16.33 £12.45 (£14.94 UK, incl VAT)
1062-043
Overview The Pololu step-up/step-down voltage regulator S7V7F5 is a switching regulator (also called a switched-mode power supply (SMPS) or DC-to-DC...
3 item(s)
End of Line
920D RE 280 Gearbox Kit
1450-010
920D RE 280 Gearbox Kit
£6.85 (£8.22 UK, incl VAT)
1450-010
MFA Como Drills 920D kit to make up the geared motor with the following possible ratios / output speeds (rpm) at 1.5V & 3V 4:1 / 1150 / 2300 16:1 /...
In Stock
Save 30%
Pololu 250:1 Micro Metal Gearmotor HP
1451-445
Pololu 250:1 Micro Metal Gearmotor HP
£21.73 £15.18 (£18.22 UK, incl VAT)
1451-445
This gearmotor is a miniature 24 x 12 x 10mm, low-current brushed DC motor with 249.98:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These...
2 item(s)
End of Line