Search resultsProducts found: 104

£0.40 £0.30 (£0.36 UK, incl VAT)
2100-056
Supplied in packs of 10 diodes Description DIODE, SMALL SIGNAL DO-35 Forward Current If(AV):250mA Forward Surge Current Ifsm Max:1A Forward...
9 item(s)
End of Line
+

Minimum quantity for "10 off BAV20 Signal Diode" is 2.

Add to wish list

£0.45 £0.35 (£0.42 UK, incl VAT)
1613-002
Non-latching push button action Rated 250mA 125V AC Panel hole diameter 7mm Overall dimensions 28mm long, 10.5mm diameter
83 item(s)
End of Line
+
Add to wish list

£0.75 £0.40 (£0.48 UK, incl VAT)
2110-100
These are the same RGB LEDs that are used for the WS2801 breakout board. They're great when you need a lot of color from not a lot of board space....
79 item(s)
End of Line
+

Minimum quantity for "LED - SMD RGB" is 2.

Add to wish list

£0.75 £0.40 (£0.48 UK, incl VAT)
2109-351
This is the SMD connector for the Nintendo DS touch screen, see related products below. 4-pin right angle ZIF connector at 0.5 mm pitch. Also available ready...
9 item(s)
End of Line
+

Minimum quantity for "Nintendo DS Touch Screen Connector" is 3.

Add to wish list

£1.51 £0.50 (£0.60 UK, incl VAT)
3812-001
This is a basic RFID tag used for presence sensing, etc. Works in the 125kHz RF range. These tags come with a unique 32-bit ID and are not re-programmable....
5 item(s)
End of Line
+
Add to wish list

£1.51 £0.50 (£0.60 UK, incl VAT)
2110-174
Huge 10mm through hole LEDs. Mood-light an entire wall!   Specification Colour Wavelength (nm) Lum. Int. (mcd) @...
5 item(s)
End of Line
+
Add to wish list

£1.51 £0.50 (£0.60 UK, incl VAT)
2900-627
Description: Why not prototype in 3D? The SparkFun Penta-shape is a roughly 1" wide penta-shaped board with 0.1" spaced holes. Use it to create different...
4 item(s)
End of Line
+
Add to wish list

£1.80 £0.60 (£0.72 UK, incl VAT)
1601-031
Relay PCB Automotive 30A, coil: 24Vdc Specially designed for automotive use with heavy duty construction enables them to switch the heavier loads required...
4 item(s)
End of Line
+
Add to wish list

£2.11 £0.70 (£0.84 UK, incl VAT)
3810-030
Ethernet is now ubiquitous with embedded systems. Before you can get your set-top box on the internet, you'll need one of these single port, RJ45 ethernet...
11 item(s)
End of Line
+
Add to wish list

£1.37 £0.78 (£0.94 UK, incl VAT)
2110-709
A 5-LED array in a 10-pin in-line package, with white segments, yellow LEDs and a black border. LED size 1.25 x 5mm.   Downloads Datasheets
3 item(s)
End of Line
+
Add to wish list

£1.61 £0.80 (£0.96 UK, incl VAT)
2110-578
These 5mm RGB (red, green, blue) units have four pins: one for each color and a common anode. Use this one LED for three status indicators or pulse width...
8 item(s)
End of Line
+
Add to wish list

£3.01 £1.00 (£1.20 UK, incl VAT)
3807-406
Description: This is a small prototyping shield for the Arduino Pro Mini. If your project requires just a little bit more space for your external...
4 item(s)
End of Line
+
Add to wish list

£3.39 £1.13 (£1.36 UK, incl VAT)
3812-003
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications....
4 item(s)
End of Line
+
Add to wish list

£3.82 £1.19 (£1.43 UK, incl VAT)
1601-034
These are massive Single Pull - Single Throw (SPST) Normally Open (NO) sealed relays from Potter and Brumfield. Use them to switch high voltage/high current...
6 item(s)
End of Line
+
Add to wish list

£2.26 £1.20 (£1.44 UK, incl VAT)
1613-448
This is a simple LED-illuminated tactile button with a red cap. It's just like a basic tactile button, but it lights up red! So now you can get visual...
4 item(s)
End of Line
+
Add to wish list

£2.26 £1.20 (£1.44 UK, incl VAT)
2900-079
This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector, center positive. This cable allows the user to use a USB port on a...
137 item(s)
End of Line
+
Add to wish list

£4.52 £1.51 (£1.81 UK, incl VAT)
2900-458
Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don't. Sensor acts like a transistor - the greater the incoming...
6 item(s)
End of Line
+
Add to wish list

£4.52 £1.51 (£1.81 UK, incl VAT)
2904-820
Description: A simple, very bright, 250mcd, white LED LilyPad. Light up the night! 5 pcs. LilyPad is a wearable e-textile technology developed by Leah...
3 item(s)
End of Line
+
Add to wish list

£4.52 £1.51 (£1.81 UK, incl VAT)
3812-004
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications....
2 item(s)
End of Line
+
Add to wish list

£4.52 £1.51 (£1.81 UK, incl VAT)
2904-841
Description: This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. LilyPad is a...
4 item(s)
End of Line
+
Add to wish list

£3.01 £1.61 (£1.93 UK, incl VAT)
2900-473
This is a breakout board for the built in WS2812 RGB LED. The WS2812 is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins...
8 item(s)
End of Line
+
Add to wish list

£3.01 £1.61 (£1.93 UK, incl VAT)
2900-604
Based on the Controllable Power Outlet Tutorial, this is the bare PCB from Sparkfun COM-09096 that allows you to switch high voltages with a simple 0 to 5V...
4 item(s)
End of Line
+
Add to wish list

£5.27 £1.76 (£2.11 UK, incl VAT)
2904-840
Description: If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick. It's a...
4 item(s)
End of Line
+
Add to wish list

£3.47 £1.85 (£2.22 UK, incl VAT)
2110-620
This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to...
3 item(s)
End of Line
+
Add to wish list