Search resultsProducts found: 104

£7.53 £2.51 (£3.01 UK, incl VAT)
3807-467
The Arduino Mega 2560 R3 is a very big and powerful microcontroller, needless to say, you want to keep it protected. Why not protect it with one of these...
3 item(s)
End of Line
+
Add to wish list

£7.53 £2.51 (£3.01 UK, incl VAT)
3808-011
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect it with one...
2 item(s)
End of Line
+
Add to wish list

£7.53 £2.51 (£3.01 UK, incl VAT)
3808-012
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect it with one...
2 item(s)
End of Line
+
Add to wish list

£7.53 £2.51 (£3.01 UK, incl VAT)
3808-013
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect it with one...
3 item(s)
End of Line
+
Add to wish list

£7.53 £2.51 (£3.01 UK, incl VAT)
2900-634
If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements,...
2 item(s)
End of Line
+
Add to wish list

£4.52 £2.41 (£2.89 UK, incl VAT)
1613-500
This is a tiny trackball akin to those found on a number of Blackberry models (8100, 8300, 8320, 8800, 8830, etc). Each of the four spindles have a tiny...
2 item(s)
End of Line
+
Add to wish list

£4.82 £2.41 (£2.89 UK, incl VAT)
1612-103
 Rotary encoders can be used similarly to potentiometers. The difference being that that an encoder has full rotation without limits (It just goes...
5 item(s)
End of Line
+
Add to wish list

£5.57 £1.86 (£2.23 UK, incl VAT)
2700-143
Description: This breakout board allows for standard surface mount, SMD and SMT, TQFP 44 pin packages with 25mil (0.8mm) spacing between pads. The PCB...
3 item(s)
End of Line
+
Add to wish list

£3.47 £1.85 (£2.22 UK, incl VAT)
2110-620
This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to...
3 item(s)
End of Line
+
Add to wish list

£5.27 £1.76 (£2.11 UK, incl VAT)
2904-840
Description: If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick. It's a...
4 item(s)
End of Line
+
Add to wish list

£3.01 £1.61 (£1.93 UK, incl VAT)
2900-473
This is a breakout board for the built in WS2812 RGB LED. The WS2812 is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins...
8 item(s)
End of Line
+
Add to wish list

£3.01 £1.61 (£1.93 UK, incl VAT)
2900-604
Based on the Controllable Power Outlet Tutorial, this is the bare PCB from Sparkfun COM-09096 that allows you to switch high voltages with a simple 0 to 5V...
4 item(s)
End of Line
+
Add to wish list

£4.52 £1.51 (£1.81 UK, incl VAT)
2900-458
Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don't. Sensor acts like a transistor - the greater the incoming...
6 item(s)
End of Line
+
Add to wish list

£4.52 £1.51 (£1.81 UK, incl VAT)
2904-820
Description: A simple, very bright, 250mcd, white LED LilyPad. Light up the night! 5 pcs. LilyPad is a wearable e-textile technology developed by Leah...
3 item(s)
End of Line
+
Add to wish list

£4.52 £1.51 (£1.81 UK, incl VAT)
3812-004
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications....
2 item(s)
End of Line
+
Add to wish list

£4.52 £1.51 (£1.81 UK, incl VAT)
2904-841
Description: This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. LilyPad is a...
4 item(s)
End of Line
+
Add to wish list

£2.26 £1.20 (£1.44 UK, incl VAT)
1613-448
This is a simple LED-illuminated tactile button with a red cap. It's just like a basic tactile button, but it lights up red! So now you can get visual...
4 item(s)
End of Line
+
Add to wish list

£2.26 £1.20 (£1.44 UK, incl VAT)
2900-079
This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector, center positive. This cable allows the user to use a USB port on a...
137 item(s)
End of Line
+
Add to wish list

£3.82 £1.19 (£1.43 UK, incl VAT)
1601-034
These are massive Single Pull - Single Throw (SPST) Normally Open (NO) sealed relays from Potter and Brumfield. Use them to switch high voltage/high current...
6 item(s)
End of Line
+
Add to wish list

£3.39 £1.13 (£1.36 UK, incl VAT)
3812-003
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications....
4 item(s)
End of Line
+
Add to wish list

£3.01 £1.00 (£1.20 UK, incl VAT)
3807-406
Description: This is a small prototyping shield for the Arduino Pro Mini. If your project requires just a little bit more space for your external...
4 item(s)
End of Line
+
Add to wish list

£1.61 £0.80 (£0.96 UK, incl VAT)
2110-578
These 5mm RGB (red, green, blue) units have four pins: one for each color and a common anode. Use this one LED for three status indicators or pulse width...
8 item(s)
End of Line
+
Add to wish list

£1.37 £0.78 (£0.94 UK, incl VAT)
2110-709
A 5-LED array in a 10-pin in-line package, with white segments, yellow LEDs and a black border. LED size 1.25 x 5mm.   Downloads Datasheets
3 item(s)
End of Line
+
Add to wish list

£2.11 £0.70 (£0.84 UK, incl VAT)
3810-030
Ethernet is now ubiquitous with embedded systems. Before you can get your set-top box on the internet, you'll need one of these single port, RJ45 ethernet...
11 item(s)
End of Line
+
Add to wish list