Search resultsProducts found: 95

86.54 46.15 (55.38 UK, incl VAT)
2109-160
Description: This is a very large serial graphic LCD. The Serial Graphic LCD backpack is soldered to the 160x128 pixel “Huge” Graphic LCD and...
1 item(s)
End of Line
+
Add to wish list

103.84 34.61 (41.53 UK, incl VAT)
3807-425
D escription: The Cellular Shield for Arduino includes all the parts needed to interface your Arduino with an SM5100B cellular module. This allows you to...
1 item(s)
End of Line
+
Add to wish list

103.84 34.61 (41.53 UK, incl VAT)
3340-206
The 9DOF Sensor stick is a very small sensor board with 9 degrees of freedom. It includes the ADXL345 accelerometer, the HMC5883L magnetometer, and the...
1 item(s)
End of Line
+
Add to wish list

96.99 32.33 (38.80 UK, incl VAT)
3800-101
The Pololu USB 16-servo controller is the latest addition to our line of R/C hobby servo controllers. The compact module measures just 48 x 26mm including...
2 item(s)
End of Line
+
Add to wish list

69.23 23.08 (27.70 UK, incl VAT)
3340-204
This is a simple breakout for the ADXL345 accelerometer and the ITG-3200 gyro. With this board, you get a full 6 degrees of freedom. The sensors communicate...
1 item(s)
End of Line
+
Add to wish list

60.57 20.20 (24.23 UK, incl VAT)
3807-437
Description: This is an Arduino shield with pogo pin connectors for each and every GPIO. It's essentially the same rig that Sparkfun use to...
1 item(s)
End of Line
+
Add to wish list

60.57 20.20 (24.23 UK, incl VAT)
3813-101
Fingerprint scanners are awesome. Why use a key when you have one right at the tip of your finger? Unfortunately, they're usually unreliable or difficult...
1 item(s)
End of Line
+
Add to wish list

56.28 18.76 (22.51 UK, incl VAT)
3800-103
The Pololu serial 16-servo controller allows you to control up to sixteen RC servos from almost any robot controller or computer. The interface to the servo...
2 item(s)
End of Line
+
Add to wish list

34.61 18.46 (22.15 UK, incl VAT)
3801-017
The LSM303DLH is a triple axis accelerometer combined with a triple axis magnetic sensor. This breakout board uses the LSM303DLH to give a you the data you...
1 item(s)
End of Line
+
Add to wish list

23.89 15.93 (19.11 UK, incl VAT)
3801-230
This gyroscope board is a basic carrier/breakout board for the ST LPR510AL dual-axis gyro, which measures the angular rates of rotation about the pitch (x)...
1 item(s)
End of Line
+
Add to wish list

36.34 12.11 (14.54 UK, incl VAT)
3804-035
Description: This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to...
1 item(s)
End of Line
+
Add to wish list

34.61 11.54 (13.85 UK, incl VAT)
2110-803
This is the medium sized LED Matrix with a backpack from Sparkfun COM-00759 that has been designed to take SPI serial input and display any graphics you...
2 item(s)
End of Line
+
Add to wish list

20.77 11.08 (13.30 UK, incl VAT)
3340-025
This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input...
2 item(s)
End of Line
+
Add to wish list

33.23 10.38 (12.46 UK, incl VAT)
2900-050
This is a stereo amplifier kit designed by Sparkfun BOB-00718 to make use of the STA540 power amplifier IC. Once this kit is completed you have a fully...
1 item(s)
End of Line
+
Add to wish list

27.69 9.23 (11.08 UK, incl VAT)
1615-105
The MPR121 capacitive keypad uses the MPR121 and 12 touch sensitive pads to give you a simple 'keypad' with an I2C output. The board also has four mounting...
1 item(s)
End of Line
+
Add to wish list

27.54 9.18 (11.02 UK, incl VAT)
3807-447
Description: This shield allows you to interface Wixel wireless modules to your Arduino (and other compatible products), enabling simple wireless...
2 item(s)
End of Line
+
Add to wish list

25.97 8.66 (10.39 UK, incl VAT)
2109-314
This is the latest evolution of the Sparkfun LCD-09393 serial LCD. Included on a single board is a 16x2 LCD and an embedded circuit based around a PIC 16F88....
1 item(s)
End of Line
+
Add to wish list

25.97 8.66 (10.39 UK, incl VAT)
3807-444
Description: If you use the SparkFun Inventors Kit (see related products below) in a classroom or workshop setting, you know that when a bunch of...
3 item(s)
End of Line
+
Add to wish list

25.97 8.66 (10.39 UK, incl VAT)
2110-684
The ZX Distance and Gesture Sensor is a touchless sensor that is capable of looking for simple gestures. Developed in conjunction with XYZ Interactive ,...
3 item(s)
End of Line
+
Add to wish list

15.57 8.31 (9.98 UK, incl VAT)
3340-021
Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of...
2 item(s)
End of Line
+
Add to wish list

15.57 8.31 (9.98 UK, incl VAT)
3807-461
The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED display. This USB...
1 item(s)
End of Line
+
Add to wish list

23.68 7.90 (9.47 UK, incl VAT)
2109-204
20 characters x 4 line alphanumeric display module. Overall size 98 x 62 x 13mm (Images are not of this actual display but of the 20 x 2 line equivalent...
1 item(s)
End of Line
+
Add to wish list

14.71 7.85 (9.43 UK, incl VAT)
2110-820
Make your own LED Matrix with minimal soldering, suitable for any beginner! The kit will give you a great introduction to programming an LED Matrix. This...
2 item(s)
End of Line
+
Add to wish list

22.49 7.49 (8.99 UK, incl VAT)
2904-851
Description: This is the LilyPad Arduino Simple Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad...
2 item(s)
End of Line
+
Add to wish list