No data found

Close

Product filters Product filters

Price

Search resultsProducts found: 104

Sort by Position: Low to High
24 Per Page
Save 67%
ProtoBoard TQFP44 0.8mm Pitch
ProtoBoard TQFP44 0.8mm Pitch
€6.40 €2.14 (€2.56 UK, incl VAT)
2700-143
Description: This breakout board allows for standard surface mount, SMD and SMT, TQFP 44 pin packages with 25mil (0.8mm) spacing between pads. The PCB...
3 item(s)
End of Line
+ −
Add to wish list
Save 47%
Barrel Jack Adapter - USB to 5.5mm
Barrel Jack Adapter - USB to 5.5mm
€2.60 €1.38 (€1.66 UK, incl VAT)
2900-079
This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector, center positive. This cable allows the user to use a USB port on a...
137 item(s)
End of Line
+ −
Add to wish list
Save 47%
IR Receiver Breakout Board
IR Receiver Breakout Board
€10.38 €5.54 (€6.64 UK, incl VAT)
2900-434
Description: This is a very small infrared receiver based on the TSOP85 receiver from Vishay. This receiver has all the filtering and 38kHz demodulation...
1 item(s)
End of Line
+ −
Add to wish list
Save 47%
RPI-1031 Tilt-a-Whirl Breakout
RPI-1031 Tilt-a-Whirl Breakout
€7.79 €4.15 (€4.98 UK, incl VAT)
2900-457
The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right. This breakout board makes...
5 item(s)
End of Line
+ −
Add to wish list
Save 67%
TEMT6000 Breakout Board
TEMT6000 Breakout Board
€5.20 €1.74 (€2.08 UK, incl VAT)
2900-458
Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don't. Sensor acts like a transistor - the greater the incoming...
6 item(s)
End of Line
+ −
Add to wish list
Save 47%
LiPo Charger Basic - Mini-USB
LiPo Charger Basic - Mini-USB
€8.66 €4.62 (€5.54 UK, incl VAT)
2900-469
If you need to charge LiPo batteries, this simple charger will do just that. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the...
11 item(s)
End of Line
+ −
Add to wish list
Save 47%
VCNL4000 Infrared Emitter Breakout
VCNL4000 Infrared Emitter Breakout
€10.38 €5.54 (€6.64 UK, incl VAT)
2900-472
In physical computing it's sometimes nice to know how physically close you are to an object. In other words, you may need to know your 'proximity' to an...
2 item(s)
End of Line
+ −
Add to wish list
Save 47%
WS2812 RGB LED Breakout Board
WS2812 RGB LED Breakout Board
€3.46 €1.85 (€2.22 UK, incl VAT)
2900-473
This is a breakout board for the built in WS2812 RGB LED. The WS2812 is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins...
8 item(s)
End of Line
+ −
Add to wish list
Save 47%
Relay Control Breakout Board Bare PCB
Relay Control Breakout Board Bare PCB
€3.46 €1.85 (€2.22 UK, incl VAT)
2900-604
Based on the Controllable Power Outlet Tutorial, this is the bare PCB from Sparkfun COM-09096 that allows you to switch high voltages with a simple 0 to 5V...
4 item(s)
End of Line
+ −
Add to wish list
Save 67%
ProtoBoard - Penta-shape
ProtoBoard - Penta-shape
€1.74 €0.57 (€0.69 UK, incl VAT)
2900-627
Description: Why not prototype in 3D? The SparkFun Penta-shape is a roughly 1" wide penta-shaped board with 0.1" spaced holes. Use it to create different...
4 item(s)
End of Line
+ −
Add to wish list
Save 67%
LilyPad LED White (5pcs)
LilyPad LED White (5pcs)
€5.20 €1.74 (€2.08 UK, incl VAT)
2904-820
Description: A simple, very bright, 250mcd, white LED LilyPad. Light up the night! 5 pcs. LilyPad is a wearable e-textile technology developed by Leah...
3 item(s)
End of Line
+ −
Add to wish list
Save 67%
LilyPad Coin Cell Battery Holder
LilyPad Coin Cell Battery Holder
€6.06 €2.02 (€2.43 UK, incl VAT)
2904-840
Description: If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick. It's a...
4 item(s)
End of Line
+ −
Add to wish list
Save 67%
LilyPad Arduino Simple Board
LilyPad Arduino Simple Board
€22.49 €7.49 (€8.99 UK, incl VAT)
2904-851
Description: This is the LilyPad Arduino Simple Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad...
2 item(s)
End of Line
+ −
Add to wish list
Save 47%
Sparkfun 3-Axis 3g ADXL335 Accelerometer
Sparkfun 3-Axis 3g ADXL335 Accelerometer
€15.57 €8.31 (€9.98 UK, incl VAT)
3340-021
Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of...
2 item(s)
End of Line
+ −
Add to wish list
Save 47%
Triple Axis Accelerometer Breakout - MMA7361
Triple Axis Accelerometer Breakout - MMA7361
€20.77 €11.08 (€13.30 UK, incl VAT)
3340-025
This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input...
2 item(s)
End of Line
+ −
Add to wish list
Save 67%
IMU Digital Combo Board-6 Deg ITG3200/ADXL345
IMU Digital Combo Board-6 Deg ITG3200/ADXL345
€69.23 €23.08 (€27.70 UK, incl VAT)
3340-204
This is a simple breakout for the ADXL345 accelerometer and the ITG-3200 gyro. With this board, you get a full 6 degrees of freedom. The sensors communicate...
1 item(s)
End of Line
+ −
Add to wish list
Save 67%
9 Degrees of Freedom - Sensor Stick
9 Degrees of Freedom - Sensor Stick
€103.84 €34.61 (€41.53 UK, incl VAT)
3340-206
The 9DOF Sensor stick is a very small sensor board with 9 degrees of freedom. It includes the ADXL345 accelerometer, the HMC5883L magnetometer, and the...
1 item(s)
End of Line
+ −
Add to wish list
Save 47%
LSM303 Breakout Board - Tilt Compensated Compass
LSM303 Breakout Board - Tilt Compensated Compass
€34.61 €18.46 (€22.15 UK, incl VAT)
3801-017
The LSM303DLH is a triple axis accelerometer combined with a triple axis magnetic sensor. This breakout board uses the LSM303DLH to give a you the data you...
1 item(s)
End of Line
+ −
Add to wish list
Save 47%
ePIR Motion Detection Zdots Single Board Computer
ePIR Motion Detection Zdots Single Board Computer
€12.98 €6.92 (€8.30 UK, incl VAT)
3801-032
Zilog's ePIR is a fully functional motion-detecting single-board computer (SBC). Combined on this board are a Z8 Encore! XP MCU, and a Murata passive...
1 item(s)
End of Line
+ −
Add to wish list
Save 41%
NTC Thermistor 1k
NTC Thermistor 1k
€0.31 €0.18 (€0.22 UK, incl VAT)
3801-140
NTC Thermistor 1k
14 item(s)
End of Line
+ −

Minimum quantity for "NTC Thermistor 1k" is 4.

Add to wish list
Save 41%
NTC Thermistor 20k
NTC Thermistor 20k
€0.31 €0.18 (€0.22 UK, incl VAT)
3801-150
NTC Thermistor 20k
31 item(s)
End of Line
+ −

Minimum quantity for "NTC Thermistor 20k" is 4.

Add to wish list
Save 33%
Pololu LPR510AL Pitch & Roll 100/400 Gyro
Pololu LPR510AL Pitch & Roll 100/400 Gyro
€23.89 €15.93 (€19.11 UK, incl VAT)
3801-230
This gyroscope board is a basic carrier/breakout board for the ST LPR510AL dual-axis gyro, which measures the angular rates of rotation about the pitch (x)...
1 item(s)
End of Line
+ −
Add to wish list
Save 67%
MPL3115A2 Altitude / Pressure Sensor
MPL3115A2 Altitude / Pressure Sensor
€15.57 €5.20 (€6.23 UK, incl VAT)
3801-322
The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high...
2 item(s)
End of Line
+ −
Add to wish list
Save 67%
XBee 2mW Chip Antenna - Series 2 (ZB)
XBee 2mW Chip Antenna - Series 2 (ZB)
€36.34 €12.11 (€14.54 UK, incl VAT)
3804-035
Description: This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to...
1 item(s)
End of Line
+ −
Add to wish list
 Prev
1 2 3 4 5
Next