Search resultsProducts found: 95

£12.24 £4.08 (£4.90 UK, incl VAT)
2109-205
A 20 character x 4 line LCD with yellow / green transflective LED backlighting. Low power consumption Alphanumeric character display Winstar...
1 item(s)
End of Line
+
Add to wish list

£22.59 £7.53 (£9.04 UK, incl VAT)
2109-314
This is the latest evolution of the Sparkfun LCD-09393 serial LCD. Included on a single board is a 16x2 LCD and an embedded circuit based around a PIC 16F88....
1 item(s)
End of Line
+
Add to wish list

£0.75 £0.40 (£0.48 UK, incl VAT)
2109-351
This is the SMD connector for the Nintendo DS touch screen, see related products below. 4-pin right angle ZIF connector at 0.5 mm pitch. Also available ready...
9 item(s)
End of Line
+

Minimum quantity for "Nintendo DS Touch Screen Connector" is 3.

Add to wish list

£5.27 £2.81 (£3.37 UK, incl VAT)
2110-053
Description: Every laser needs a holder! This custom designed plastic mount fits the SparkFun flat laser modules. Insert the module into the mount and the...
1 item(s)
End of Line
+
Add to wish list

£1.51 £0.50 (£0.60 UK, incl VAT)
2110-174
Huge 10mm through hole LEDs. Mood-light an entire wall!   Specification Colour Wavelength (nm) Lum. Int. (mcd) @...
5 item(s)
End of Line
+
Add to wish list

£0.38 £0.20 (£0.24 UK, incl VAT)
2110-184
Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.   Specification...
14 item(s)
End of Line
+

Minimum quantity for "Diffused LED - Green 10mm" is 2.

Add to wish list

£0.43 £0.23 (£0.28 UK, incl VAT)
2110-454
22 item(s)
End of Line
+

Minimum quantity for "10mm Recessed LED Bezel" is 2.

Add to wish list

£0.80 £0.25 (£0.30 UK, incl VAT)
2110-531
These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. All lenses are clear.   Specification...
7 item(s)
End of Line
+
Add to wish list

£0.38 £0.20 (£0.24 UK, incl VAT)
2110-546
These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. All lenses are clear.   Specification...
44 item(s)
End of Line
+
Add to wish list

£0.26 £0.13 (£0.16 UK, incl VAT)
2110-563
4.8mm diffused package LED's mounted in a black ABS moulding meeting UL94V-0 flammability rating. End stackable to give a flush right angle mounting on...
13 item(s)
End of Line
+

Minimum quantity for "5mm PCB Mounting Dual RED LED" is 3.

Add to wish list

£1.61 £0.80 (£0.96 UK, incl VAT)
2110-578
These 5mm RGB (red, green, blue) units have four pins: one for each color and a common anode. Use this one LED for three status indicators or pulse width...
8 item(s)
End of Line
+
Add to wish list

£3.47 £1.85 (£2.22 UK, incl VAT)
2110-620
This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to...
3 item(s)
End of Line
+
Add to wish list

£15.57 £5.19 (£6.23 UK, incl VAT)
2110-638
This quadrature encoder works with our Pololu micro metal gearmotors, 42×19mm wheel, and extended bracket to measure the rotation speed and direction...
1 item(s)
End of Line
+
Add to wish list

£1.37 £0.78 (£0.94 UK, incl VAT)
2110-709
A 5-LED array in a 10-pin in-line package, with white segments, yellow LEDs and a black border. LED size 1.25 x 5mm.   Downloads Datasheets
3 item(s)
End of Line
+
Add to wish list

£6.78 £3.61 (£4.33 UK, incl VAT)
2110-802
Description: LED Matrix with Bright-Red and Bright-Green LEDs. This medium matrix has 64 Red/Green LEDs built into one common cathode housing. Unit...
2 item(s)
End of Line
+
Add to wish list

£30.11 £10.04 (£12.05 UK, incl VAT)
2110-803
This is the medium sized LED Matrix with a backpack from Sparkfun COM-00759 that has been designed to take SPI serial input and display any graphics you...
2 item(s)
End of Line
+
Add to wish list

£12.80 £6.83 (£8.20 UK, incl VAT)
2110-820
Make your own LED Matrix with minimal soldering, suitable for any beginner! The kit will give you a great introduction to programming an LED Matrix. This...
2 item(s)
End of Line
+
Add to wish list

£5.57 £1.86 (£2.23 UK, incl VAT)
2700-143
Description: This breakout board allows for standard surface mount, SMD and SMT, TQFP 44 pin packages with 25mil (0.8mm) spacing between pads. The PCB...
3 item(s)
End of Line
+
Add to wish list

£2.26 £1.20 (£1.44 UK, incl VAT)
2900-079
This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector, center positive. This cable allows the user to use a USB port on a...
137 item(s)
End of Line
+
Add to wish list

£9.03 £4.82 (£5.78 UK, incl VAT)
2900-434
Description: This is a very small infrared receiver based on the TSOP85 receiver from Vishay. This receiver has all the filtering and 38kHz demodulation...
1 item(s)
End of Line
+
Add to wish list

£6.78 £3.61 (£4.33 UK, incl VAT)
2900-457
The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right. This breakout board makes...
5 item(s)
End of Line
+
Add to wish list

£4.52 £1.51 (£1.81 UK, incl VAT)
2900-458
Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don't. Sensor acts like a transistor - the greater the incoming...
6 item(s)
End of Line
+
Add to wish list

£7.53 £4.02 (£4.82 UK, incl VAT)
2900-469
If you need to charge LiPo batteries, this simple charger will do just that. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the...
11 item(s)
End of Line
+
Add to wish list

£9.03 £4.82 (£5.78 UK, incl VAT)
2900-472
In physical computing it's sometimes nice to know how physically close you are to an object. In other words, you may need to know your 'proximity' to an...
2 item(s)
End of Line
+
Add to wish list