Search resultsProducts found: 95

0.86 0.46 (0.55 UK, incl VAT)
2109-351
This is the SMD connector for the Nintendo DS touch screen, see related products below. 4-pin right angle ZIF connector at 0.5 mm pitch. Also available ready...
9 item(s)
End of Line
+

Minimum quantity for "Nintendo DS Touch Screen Connector" is 3.

Add to wish list

0.31 0.18 (0.22 UK, incl VAT)
3801-140
NTC Thermistor 1k
14 item(s)
End of Line
+

Minimum quantity for "NTC Thermistor 1k" is 4.

Add to wish list

0.31 0.18 (0.22 UK, incl VAT)
3801-150
NTC Thermistor 20k
31 item(s)
End of Line
+

Minimum quantity for "NTC Thermistor 20k" is 4.

Add to wish list

8.66 2.89 (3.46 UK, incl VAT)
3808-013
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect it with one...
3 item(s)
End of Line
+
Add to wish list

11.92 3.98 (4.77 UK, incl VAT)
2109-167
This 16 character x 2 line LCD packs 32 characters into an outline smaller than that of most two-line displays. This unit uses the HD44780 interface found...
2 item(s)
End of Line
+
Add to wish list

15.51 5.17 (6.21 UK, incl VAT)
2109-168
This 16x LCD packs 32 characters into an outline smaller than that of most two-line displays. An LED backlight enables optimal viewing in all lighting...
1 item(s)
End of Line
+
Add to wish list

23.89 15.93 (19.11 UK, incl VAT)
3801-230
This gyroscope board is a basic carrier/breakout board for the ST LPR510AL dual-axis gyro, which measures the angular rates of rotation about the pitch (x)...
1 item(s)
End of Line
+
Add to wish list

56.28 18.76 (22.51 UK, incl VAT)
3800-103
The Pololu serial 16-servo controller allows you to control up to sixteen RC servos from almost any robot controller or computer. The interface to the servo...
2 item(s)
End of Line
+
Add to wish list

96.99 32.33 (38.80 UK, incl VAT)
3800-101
The Pololu USB 16-servo controller is the latest addition to our line of R/C hobby servo controllers. The compact module measures just 48 x 26mm including...
2 item(s)
End of Line
+
Add to wish list

1.74 0.57 (0.69 UK, incl VAT)
2900-627
Description: Why not prototype in 3D? The SparkFun Penta-shape is a roughly 1" wide penta-shaped board with 0.1" spaced holes. Use it to create different...
4 item(s)
End of Line
+
Add to wish list

6.40 2.14 (2.56 UK, incl VAT)
2700-143
Description: This breakout board allows for standard surface mount, SMD and SMT, TQFP 44 pin packages with 25mil (0.8mm) spacing between pads. The PCB...
3 item(s)
End of Line
+
Add to wish list

3.46 1.15 (1.38 UK, incl VAT)
3807-406
Description: This is a small prototyping shield for the Arduino Pro Mini. If your project requires just a little bit more space for your external...
4 item(s)
End of Line
+
Add to wish list

0.52 0.40 (0.48 UK, incl VAT)
1613-002
Non-latching push button action Rated 250mA 125V AC Panel hole diameter 7mm Overall dimensions 28mm long, 10.5mm diameter
83 item(s)
End of Line
+
Add to wish list

17.90 5.97 (7.16 UK, incl VAT)
2110-638
This quadrature encoder works with our Pololu micro metal gearmotors, 42×19mm wheel, and extended bracket to measure the rotation speed and direction...
1 item(s)
End of Line
+
Add to wish list

14.71 7.85 (9.43 UK, incl VAT)
2110-820
Make your own LED Matrix with minimal soldering, suitable for any beginner! The kit will give you a great introduction to programming an LED Matrix. This...
2 item(s)
End of Line
+
Add to wish list

3.46 1.85 (2.22 UK, incl VAT)
2900-604
Based on the Controllable Power Outlet Tutorial, this is the bare PCB from Sparkfun COM-09096 that allows you to switch high voltages with a simple 0 to 5V...
4 item(s)
End of Line
+
Add to wish list

2.07 0.69 (0.83 UK, incl VAT)
1601-031
Relay PCB Automotive 30A, coil: 24Vdc Specially designed for automotive use with heavy duty construction enables them to switch the heavier loads required...
4 item(s)
End of Line
+
Add to wish list

4.39 1.37 (1.64 UK, incl VAT)
1601-034
These are massive Single Pull - Single Throw (SPST) Normally Open (NO) sealed relays from Potter and Brumfield. Use them to switch high voltage/high current...
6 item(s)
End of Line
+
Add to wish list

1.74 0.57 (0.69 UK, incl VAT)
3812-001
This is a basic RFID tag used for presence sensing, etc. Works in the 125kHz RF range. These tags come with a unique 32-bit ID and are not re-programmable....
5 item(s)
End of Line
+
Add to wish list

3.90 1.30 (1.56 UK, incl VAT)
3812-003
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications....
4 item(s)
End of Line
+
Add to wish list

5.20 1.74 (2.08 UK, incl VAT)
3812-004
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications....
2 item(s)
End of Line
+
Add to wish list

0.46 0.23 (0.28 UK, incl VAT)
1613-432
This right-angle tactile switch has a great 'click' to it. Also, because it's a through-hole design it's very sturdy. Mount it on the edge of your board for...
23 item(s)
End of Line
+

Minimum quantity for "Right Angle Tactile Button" is 4.

Add to wish list

2.43 0.80 (0.97 UK, incl VAT)
3810-030
Ethernet is now ubiquitous with embedded systems. Before you can get your set-top box on the internet, you'll need one of these single port, RJ45 ethernet...
11 item(s)
End of Line
+
Add to wish list

5.54 2.77 (3.32 UK, incl VAT)
1612-103
 Rotary encoders can be used similarly to potentiometers. The difference being that that an encoder has full rotation without limits (It just goes...
5 item(s)
End of Line
+
Add to wish list

7.79 4.15 (4.98 UK, incl VAT)
2900-457
The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right. This breakout board makes...
5 item(s)
End of Line
+
Add to wish list

25.97 8.66 (10.39 UK, incl VAT)
2109-314
This is the latest evolution of the Sparkfun LCD-09393 serial LCD. Included on a single board is a 16x2 LCD and an embedded circuit based around a PIC 16F88....
1 item(s)
End of Line
+
Add to wish list

86.54 46.15 (55.38 UK, incl VAT)
2109-160
Description: This is a very large serial graphic LCD. The Serial Graphic LCD backpack is soldered to the 160x128 pixel “Huge” Graphic LCD and...
1 item(s)
End of Line
+
Add to wish list

15.57 8.31 (9.98 UK, incl VAT)
3340-021
Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of...
2 item(s)
End of Line
+
Add to wish list

25.97 8.66 (10.39 UK, incl VAT)
3807-444
Description: If you use the SparkFun Inventors Kit (see related products below) in a classroom or workshop setting, you know that when a bunch of...
3 item(s)
End of Line
+
Add to wish list

15.57 8.31 (9.98 UK, incl VAT)
3807-461
The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED display. This USB...
1 item(s)
End of Line
+
Add to wish list

15.57 5.20 (6.23 UK, incl VAT)
2110-622
This is the SparkFun “Time-of-Flight” Range Finder, a breakout for the VL6180 distance sensor. Unlike most distance sensors that rely...
1 item(s)
End of Line
+
Add to wish list

33.23 10.38 (12.46 UK, incl VAT)
2900-050
This is a stereo amplifier kit designed by Sparkfun BOB-00718 to make use of the STA540 power amplifier IC. Once this kit is completed you have a fully...
1 item(s)
End of Line
+
Add to wish list

1.74 0.57 (0.69 UK, incl VAT)
2110-174
Huge 10mm through hole LEDs. Mood-light an entire wall!   Specification Colour Wavelength (nm) Lum. Int. (mcd) @...
5 item(s)
End of Line
+
Add to wish list

0.44 0.23 (0.28 UK, incl VAT)
2110-546
These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. All lenses are clear.   Specification...
44 item(s)
End of Line
+
Add to wish list

2.60 1.38 (1.66 UK, incl VAT)
1613-448
This is a simple LED-illuminated tactile button with a red cap. It's just like a basic tactile button, but it lights up red! So now you can get visual...
4 item(s)
End of Line
+
Add to wish list

0.18 0.06 (0.07 UK, incl VAT)
1613-420
A switch supplied by Sparkfun COM-08229 as used for processor board resets etc.. Specification: 12V 50mA max Contact resistance 100mOhms max Travel...
32 item(s)
End of Line
+

Minimum quantity for "Tactile Switch Surface Mount 6x3x4.3mm" is 8.

Add to wish list

5.20 1.74 (2.08 UK, incl VAT)
2900-458
Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don't. Sensor acts like a transistor - the greater the incoming...
6 item(s)
End of Line
+
Add to wish list

20.77 11.08 (13.30 UK, incl VAT)
3340-025
This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input...
2 item(s)
End of Line
+
Add to wish list

60.57 20.20 (24.23 UK, incl VAT)
3807-437
Description: This is an Arduino shield with pogo pin connectors for each and every GPIO. It's essentially the same rig that Sparkfun use to...
1 item(s)
End of Line
+
Add to wish list

13.85 4.62 (5.54 UK, incl VAT)
2900-632
The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal...
2 item(s)
End of Line
+
Add to wish list

10.38 5.54 (6.64 UK, incl VAT)
2900-472
In physical computing it's sometimes nice to know how physically close you are to an object. In other words, you may need to know your 'proximity' to an...
2 item(s)
End of Line
+
Add to wish list

27.54 9.18 (11.02 UK, incl VAT)
3807-447
Description: This shield allows you to interface Wixel wireless modules to your Arduino (and other compatible products), enabling simple wireless...
2 item(s)
End of Line
+
Add to wish list

3.46 1.85 (2.22 UK, incl VAT)
2900-473
This is a breakout board for the built in WS2812 RGB LED. The WS2812 is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins...
8 item(s)
End of Line
+
Add to wish list

36.34 12.11 (14.54 UK, incl VAT)
3804-035
Description: This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to...
1 item(s)
End of Line
+
Add to wish list

25.97 8.66 (10.39 UK, incl VAT)
2110-684
The ZX Distance and Gesture Sensor is a touchless sensor that is capable of looking for simple gestures. Developed in conjunction with XYZ Interactive ,...
3 item(s)
End of Line
+
Add to wish list