No data found

Close

Categories

Makertronics 6V 50 RPM N20 Micro Metal Gear Motor

$5.32
($6.39 UK, incl VAT)
Price in points: 936 points
6010-062
10 g
In Stock
+ −
Add to wish list

From our Makertronics branded range of products at Everyday Low Prices.

GA12 N20 Micro metal geared motors available in various ratios giving nominal output speeds of 15 to 1000 rpm.

  • Voltage: 6V (3V to 9V)
  • Approximate No Load Output Speed: 50 rpm
  • No Load Current: <30mA
  • Approximate Rated Load Output speed: 40 rpm
  • Rated Current: 40mA
  • Stall Current @ 6V: 400mA
  • Shaft: 'D' profile,  3mm x 9mm
  • Size: 10mm x 12mm x 27mm (excluding shaft)

Customers also bought....

Tbot Standard MOD 1 Plastic Gear 13T 2.9mm Bore
4600-170
Tbot Standard MOD 1 Plastic Gear 13T 2.9mm Bore
$0.28 ($0.34 UK, incl VAT)
4600-170
A MOD 1 PVC gear for interference fit on a 3mm shaft. OD 15mm, width 5.5mm, 13 Teeth
In Stock

Minimum quantity for "Tbot Standard MOD 1 Plastic Gear 13T 2.9mm Bore" is 4.

Plastic Rack MOD 1, 6x6x50mm
4600-020
Plastic Rack MOD 1, 6x6x50mm
$0.66 ($0.80 UK, incl VAT)
4600-020
MOD 1 plastic rack 50mm long x 6mm x 6mm.
In Stock

Minimum quantity for "Plastic Rack MOD 1, 6x6x50mm" is 2.

Pulley Belt 2.5mm x 20mm Internal Diameter
4602-210
Pulley Belt 2.6mm x 20.3mm Internal Diameter
$0.65 ($0.77 UK, incl VAT)
4602-210
A 2.6mm diameter 'O' ring with an internal diameter of 20.3mm. Made from Nitrile (NBR N70) rubber which is ideal for use as a drive belt on our wooden,...
In Stock
Miniature Model Bearing 683ZZ 3x7x3
4255-024
Miniature Model Bearing 683ZZ 3x7x3
$0.78 ($0.94 UK, incl VAT)
4255-024
Ball Bearing: Bore 3mm Outer Diameter 7mm Width 3mm
In Stock
Miniature Model Bearing MR104ZZ 4x10x4
4255-037
Miniature Model Bearing MR104ZZ 4x10x4
$0.78 ($0.94 UK, incl VAT)
4255-037
Ball Bearing: Bore 4mm Outer Diameter 10mm Width 4mm Load rating 711N Max Speed (oil) 56,000 rpm
In Stock