Search resultsProducts found: 104

22.49 7.49 (8.99 UK, incl VAT)
2904-851
Description: This is the LilyPad Arduino Simple Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad...
2 item(s)
End of Line
+
Add to wish list

15.57 8.31 (9.98 UK, incl VAT)
3340-021
Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of...
2 item(s)
End of Line
+
Add to wish list

20.77 11.08 (13.30 UK, incl VAT)
3340-025
This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input...
2 item(s)
End of Line
+
Add to wish list

69.23 23.08 (27.70 UK, incl VAT)
3340-204
This is a simple breakout for the ADXL345 accelerometer and the ITG-3200 gyro. With this board, you get a full 6 degrees of freedom. The sensors communicate...
1 item(s)
End of Line
+
Add to wish list

103.84 34.61 (41.53 UK, incl VAT)
3340-206
The 9DOF Sensor stick is a very small sensor board with 9 degrees of freedom. It includes the ADXL345 accelerometer, the HMC5883L magnetometer, and the...
1 item(s)
End of Line
+
Add to wish list

34.61 18.46 (22.15 UK, incl VAT)
3801-017
The LSM303DLH is a triple axis accelerometer combined with a triple axis magnetic sensor. This breakout board uses the LSM303DLH to give a you the data you...
1 item(s)
End of Line
+
Add to wish list

12.98 6.92 (8.30 UK, incl VAT)
3801-032
Zilog's ePIR is a fully functional motion-detecting single-board computer (SBC). Combined on this board are a Z8 Encore! XP MCU, and a Murata passive...
1 item(s)
End of Line
+
Add to wish list

0.31 0.18 (0.22 UK, incl VAT)
3801-140
NTC Thermistor 1k
14 item(s)
End of Line
+

Minimum quantity for "NTC Thermistor 1k" is 4.

Add to wish list

0.31 0.18 (0.22 UK, incl VAT)
3801-150
NTC Thermistor 20k
31 item(s)
End of Line
+

Minimum quantity for "NTC Thermistor 20k" is 4.

Add to wish list

23.89 15.93 (19.11 UK, incl VAT)
3801-230
This gyroscope board is a basic carrier/breakout board for the ST LPR510AL dual-axis gyro, which measures the angular rates of rotation about the pitch (x)...
1 item(s)
End of Line
+
Add to wish list

15.57 5.20 (6.23 UK, incl VAT)
3801-322
The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high...
2 item(s)
End of Line
+
Add to wish list

36.34 12.11 (14.54 UK, incl VAT)
3804-035
Description: This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to...
1 item(s)
End of Line
+
Add to wish list