No data found

Close

Product filters Product filters

Price

Search resultsProducts found: 95

Sort Alphabetically: Z to A
12 Per Page
Save 67%
ZX Distance and Gesture Sensor
ZX Distance and Gesture Sensor
$25.67 $8.56 ($10.27 UK, incl VAT)
2110-684
The ZX Distance and Gesture Sensor is a touchless sensor that is capable of looking for simple gestures. Developed in conjunction with XYZ Interactive ,...
3 item(s)
End of Line
+ −
Add to wish list
Save 67%
XBee 2mW Chip Antenna - Series 2 (ZB)
XBee 2mW Chip Antenna - Series 2 (ZB)
$35.93 $11.98 ($14.38 UK, incl VAT)
3804-035
Description: This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to...
1 item(s)
End of Line
+ −
Add to wish list
Save 47%
WS2812 RGB LED Breakout Board
WS2812 RGB LED Breakout Board
$3.42 $1.83 ($2.19 UK, incl VAT)
2900-473
This is a breakout board for the built in WS2812 RGB LED. The WS2812 is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins...
8 item(s)
End of Line
+ −
Add to wish list
Save 67%
Wixel Shield for Arduino
Wixel Shield for Arduino
$27.23 $9.08 ($10.90 UK, incl VAT)
3807-447
Description: This shield allows you to interface Wixel wireless modules to your Arduino (and other compatible products), enabling simple wireless...
2 item(s)
End of Line
+ −
Add to wish list
Save 47%
VCNL4000 Infrared Emitter Breakout
VCNL4000 Infrared Emitter Breakout
$10.26 $5.48 ($6.57 UK, incl VAT)
2900-472
In physical computing it's sometimes nice to know how physically close you are to an object. In other words, you may need to know your 'proximity' to an...
2 item(s)
End of Line
+ −
Add to wish list
Save 67%
UV Sensor Breakout Board - ML8511
UV Sensor Breakout Board - ML8511
$13.69 $4.57 ($5.48 UK, incl VAT)
2900-632
The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal...
2 item(s)
End of Line
+ −
Add to wish list
Save 67%
Uno Compatible Pogobed Kit for Shield Development
$59.89 $19.97 ($23.95 UK, incl VAT)
3807-437
Description: This is an Arduino shield with pogo pin connectors for each and every GPIO. It's essentially the same rig that Sparkfun use to...
1 item(s)
End of Line
+ −
Add to wish list
Save 47%
Triple Axis Accelerometer Breakout - MMA7361
Triple Axis Accelerometer Breakout - MMA7361
$20.53 $10.95 ($13.15 UK, incl VAT)
3340-025
This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input...
2 item(s)
End of Line
+ −
Add to wish list
Save 67%
TEMT6000 Breakout Board
TEMT6000 Breakout Board
$5.14 $1.72 ($2.06 UK, incl VAT)
2900-458
Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don't. Sensor acts like a transistor - the greater the incoming...
6 item(s)
End of Line
+ −
Add to wish list
Save 69%
Tactile Switch Surface Mount 6x3x4.3mm
Tactile Switch Surface Mount 6x3x4.3mm
$0.18 $0.06 ($0.07 UK, incl VAT)
1613-420
A switch supplied by Sparkfun COM-08229 as used for processor board resets etc.. Specification: 12V 50mA max Contact resistance 100mOhms max Travel...
32 item(s)
End of Line
+ −

Minimum quantity for "Tactile Switch Surface Mount 6x3x4.3mm" is 8.

Add to wish list
Save 47%
Tactile Switch 12x12 with Red LED Head
Tactile Switch 12x12 with Red LED Head
$2.57 $1.36 ($1.64 UK, incl VAT)
1613-448
This is a simple LED-illuminated tactile button with a red cap. It's just like a basic tactile button, but it lights up red! So now you can get visual...
4 item(s)
End of Line
+ −
Add to wish list
Save 47%
Super Bright LED - Green - 1pcs
Super Bright LED - Green - 1pcs
$0.43 $0.23 ($0.27 UK, incl VAT)
2110-546
These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. All lenses are clear.   Specification...
44 item(s)
End of Line
+ −
Add to wish list
 Prev
1 2 3 4 5 6 7 8
Next