No data found

Close

Product filters Product filters

Price

Search resultsProducts found: 95

Sort Alphabetically: Z to A
12 Per Page
Save 67%
ZX Distance and Gesture Sensor
ZX Distance and Gesture Sensor
€25.97 €8.66 (€10.39 UK, incl VAT)
2110-684
The ZX Distance and Gesture Sensor is a touchless sensor that is capable of looking for simple gestures. Developed in conjunction with XYZ Interactive ,...
3 item(s)
End of Line
+ −
Add to wish list
Save 67%
XBee 2mW Chip Antenna - Series 2 (ZB)
XBee 2mW Chip Antenna - Series 2 (ZB)
€36.34 €12.11 (€14.54 UK, incl VAT)
3804-035
Description: This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to...
1 item(s)
End of Line
+ −
Add to wish list
Save 47%
WS2812 RGB LED Breakout Board
WS2812 RGB LED Breakout Board
€3.46 €1.85 (€2.22 UK, incl VAT)
2900-473
This is a breakout board for the built in WS2812 RGB LED. The WS2812 is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins...
8 item(s)
End of Line
+ −
Add to wish list
Save 67%
Wixel Shield for Arduino
Wixel Shield for Arduino
€27.54 €9.18 (€11.02 UK, incl VAT)
3807-447
Description: This shield allows you to interface Wixel wireless modules to your Arduino (and other compatible products), enabling simple wireless...
2 item(s)
End of Line
+ −
Add to wish list
Save 47%
VCNL4000 Infrared Emitter Breakout
VCNL4000 Infrared Emitter Breakout
€10.38 €5.54 (€6.64 UK, incl VAT)
2900-472
In physical computing it's sometimes nice to know how physically close you are to an object. In other words, you may need to know your 'proximity' to an...
2 item(s)
End of Line
+ −
Add to wish list
Save 67%
UV Sensor Breakout Board - ML8511
UV Sensor Breakout Board - ML8511
€13.85 €4.62 (€5.54 UK, incl VAT)
2900-632
The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal...
2 item(s)
End of Line
+ −
Add to wish list
Save 67%
Uno Compatible Pogobed Kit for Shield Development
€60.57 €20.20 (€24.23 UK, incl VAT)
3807-437
Description: This is an Arduino shield with pogo pin connectors for each and every GPIO. It's essentially the same rig that Sparkfun use to...
1 item(s)
End of Line
+ −
Add to wish list
Save 47%
Triple Axis Accelerometer Breakout - MMA7361
Triple Axis Accelerometer Breakout - MMA7361
€20.77 €11.08 (€13.30 UK, incl VAT)
3340-025
This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input...
2 item(s)
End of Line
+ −
Add to wish list
Save 67%
TEMT6000 Breakout Board
TEMT6000 Breakout Board
€5.20 €1.74 (€2.08 UK, incl VAT)
2900-458
Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don't. Sensor acts like a transistor - the greater the incoming...
6 item(s)
End of Line
+ −
Add to wish list
Save 69%
Tactile Switch Surface Mount 6x3x4.3mm
Tactile Switch Surface Mount 6x3x4.3mm
€0.18 €0.06 (€0.07 UK, incl VAT)
1613-420
A switch supplied by Sparkfun COM-08229 as used for processor board resets etc.. Specification: 12V 50mA max Contact resistance 100mOhms max Travel...
32 item(s)
End of Line
+ −

Minimum quantity for "Tactile Switch Surface Mount 6x3x4.3mm" is 8.

Add to wish list
Save 47%
Tactile Switch 12x12 with Red LED Head
Tactile Switch 12x12 with Red LED Head
€2.60 €1.38 (€1.66 UK, incl VAT)
1613-448
This is a simple LED-illuminated tactile button with a red cap. It's just like a basic tactile button, but it lights up red! So now you can get visual...
4 item(s)
End of Line
+ −
Add to wish list
Save 47%
Super Bright LED - Green - 1pcs
Super Bright LED - Green - 1pcs
€0.44 €0.23 (€0.28 UK, incl VAT)
2110-546
These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. All lenses are clear.   Specification...
44 item(s)
End of Line
+ −
Add to wish list
 Prev
1 2 3 4 5 6 7 8
Next