MOD 0.5 steel gears that are narrower than our standard MOD 0.5 range and are pre-tapped 1 x M3 for easy shaft fixing
MOD 0.5, 10 Tooth Steel Model Gear. Note: Hobbed type pinion with cutter run out after the face width length
MOD 0.5, 10 Tooth Steel Model Gear. Note: Hobbed type pinion with cutter run out after the face width length
Part No. | 4905-010 |
Code | SSN05/10B |
Type | B |
No. of Teeth | 10 |
Pitch Ø dp | 5 |
Bore Ø H8 | 2 |
Hub/Boss Ø dm | 7 |
Outside Ø de | 6 |
O/A Width A | 12 |
Face Width B | 5 |
Every effort is taken to ensure the accuracy of the table data
Design variations and errors although rare may occur