No data found

Close

Categories

Polythene Wheel 38 x 7.3mm

£0.70
(£0.84 UK, incl VAT)
Price in points: 140 points
4603-032
8 g
In Stock
+ −
Add to wish list
A 38mm diameter wheel that is a tight (interference) fit on a 3mm shaft. Part number 4603-033 can be used as a tyre on this wheel but we would recommend a few drops of adhesive are applied to prevent the tyre from working its way off in use. Note colour of wheel can differ from that shown in the image.

Customers also bought....

10mm Miniature Plastic Model Pulley
4602-035
10mm Miniature Plastic Model Pulley
£0.62 (£0.74 UK, incl VAT)
4602-035
A black plastic pulley which is a push fit on a 2mm diameter shaft. Suitable for belts up to 4mm diameter but we recommend to use with 2.5 to 3mm round...
In Stock
MOD 0.5 Double Gear 50/10T 2.9mm Bore
4600-073
MOD 0.5 Double Gear 50/10T 2.9mm Bore
£0.24 (£0.29 UK, incl VAT)
4600-073
A double gear with 50/10 teeth. OD 26/6mm, width 2.5/4mm, overall width 6.5mm. Intended as an interference fit on a 3mm shaft.
In Stock
MOD 0.5 Double Gear 30/10T 2.9mm Bore
4600-071
MOD 0.5 Double Gear 30/10T 2.9mm Bore
£0.20 (£0.24 UK, incl VAT)
4600-071
A double gear with 30/10 teeth. OD 16/6mm, width 2.5/4mm, overall width 6.5mm. Intended as an interference fit on a 3mm shaft.
In Stock
Hostaform Rack MOD 0.5, 4x4.5x250mm
7700-101
Hostaform Rack MOD 0.5, 4x4.5x250mm
£2.44 (£2.93 UK, incl VAT)
7700-101
White Plastic Mod 0.5 Rack 4x4.5x250mm. For dimensions and product description, click button below. We source our special order products from the largest...
In Stock
MOD 0.5 Double Gear 50/10T 3.1mm Bore
4600-074
MOD 0.5 Double Gear 50/10T 3.1mm Bore
£0.24 (£0.29 UK, incl VAT)
4600-074
A double gear with 50/10 teeth. OD 26/6mm, width 2.5/4mm, overall width 6.5mm. Intended as a slip fit on a 3mm shaft.
In Stock