No data found

Close

Categories

Testimonials Testimonials

Hostaform Rack MOD 0.5, 4x4.5x250mm

Write a review
£2.44
(£2.93 UK, incl VAT)
7700-101
7 g
In stock
+ −
Our quantity discounts:
Quantity 10+ 50+
Price £2.44 £2.44
Add to wish list

White Plastic Mod 0.5 Rack 4x4.5x250mm. For dimensions and product description, click button below. We source our special order products from the largest transmission product distributors in England but sometimes the lead time can be longer than quoted above.

Specification

A MOD 0.5 rack made from Hostaform.

  • MOD: 0.5
  • Width: 4mm
  • Height: 4.5mm
  • Length: 250mm

No posts found

Write a review

The thread pitch appears none standard. About 16.5tpi What fits this ?

Asked by robert | 02/02/2019, 21:18 | 1 answer(s)

I would like to use Hostaform Rack MOD 0.5, 4x4.5x250mm Part No.: 7700-101 but bend it around a 135mm circular plate so that it can be turned with a MOD 0.5 Plastic Worm Gear. Is this possible with this rack? If not can you suggest an alternative please?

Asked by Brian | 02/10/2015, 11:32 | 1 answer(s)
New post

Customers also bought....

MOD 0.5 Pinion Gear
4600-070
MOD 0.5 Pinion Gear
£0.16 (£0.19 UK, incl VAT)
4600-070
Notes: Pinion gears sold individually but also available in packs of 10 upwards. A 10T pinion gear for an interference fit on a 2mm motor shaft. Nominal...
In stock
Hostaform Rack MOD 0.5, 4x6x250mm
7700-102
Hostaform Rack MOD 0.5, 4x6x250mm
£2.48 (£2.98 UK, incl VAT)
7700-102
White Plastic Mod 0.5 Rack 4x6x250mm. For dimensions and product description, click button below. We source our special order products from the largest...
In stock
MOD 0.5 Double Gear 30/10T 2.9mm Bore
4600-071
MOD 0.5 Double Gear 30/10T 2.9mm Bore
£0.17 (£0.20 UK, incl VAT)
4600-071
A double gear with 30/10 teeth. OD 16/6mm, width 2.5/4mm, overall width 6.5mm. Intended as an interference fit on a 3mm shaft.
In stock
MOD 0.5 Plastic Worm Gear 6mm Pk of 10
4600-038
MOD 0.5 Plastic Worm Gear 6mm Pk of 10
£0.85 (£1.02 UK, incl VAT)
4600-038
A miniature worm gear 6mm long, 6mm diameter that is a push fit onto 2mm motor shafts. Supplied in packs of 10. Downloads Datasheet
In stock
Polythene Wheel 38 x 7.3mm
4603-032
Polythene Wheel 38 x 7.3mm
£0.70 (£0.84 UK, incl VAT)
4603-032
A 38mm diameter wheel that is a tight (interference) fit on a 3mm shaft. Part number 4603-033 can be used as a tyre on this wheel but we would recommend a...
In stock