Testimonials Testimonials

Plastic Rack MOD 1, 16x5x100mm

£0.53
(£0.64 UK, incl VAT)
Price in points: 106 points
4600-024
5 g
In stock
+
An interlocking plastic rack 100mm long x 16mm wide (6.5mm tooth width) that can be connected together to make longer racks. Suitable for use with any of our MOD 1 plastic gears

No posts found

Write a review

What are the height of the teeth

Asked by Gus Hall | 29/04/2022, 14:54 | 1 answer(s)

Would this rack, with an appropriate pinion, be able to withstand a vertical load of around 3Kg?

Asked by Richard | 05/02/2015, 11:48 | 1 answer(s)

Are the racks suitable to be bent around the edge of a circle...say 600mm wide with the teeth facing upwards?

Asked by Robert Frost | 08/03/2012, 20:15 | 1 answer(s)

I believe this thing is perfect but I need a gear for it as well and my shaft diameter is 1.5mm the the mounting hole diameter must be the same is there any way to find one for me and sending me the spec?

Asked by Ali | 20/01/2012, 10:59 | 1 answer(s)

What is the thickness?

Asked by Howard Barnes | 10/03/2011, 14:05 | 1 answer(s)

Customers also bought....

4600-132
£0.89 (£1.07 UK, incl VAT)
4600-132
Overall diameter 14mm, boss diameter between 9 and 10mm, tooth width of 6mm. Bore is 4mm. Supplied complete with a M3 grub screw.
In stock

4600-135
£1.28 (£1.54 UK, incl VAT)
4600-135
Overall diameter 22mm, boss diameter between 9 and 10mm, tooth width of 6mm. Bore is 4mm. Supplied complete with a M3 grub screw.
In stock

4600-020
£0.47 (£0.56 UK, incl VAT)
4600-020
MOD 1 plastic rack 50mm long x 6mm x 6mm.
In stock

4600-150
£0.96 (£1.15 UK, incl VAT)
4600-150
Now we were quite surpised at the quality of these gears and they are quite suitable for general model making. Note colour supplied may vary from that shown...
In stock

4600-136
£1.30 (£1.56 UK, incl VAT)
4600-136
Overall diameter 32mm, boss diameter between 9 and 10mm, tooth width of 6mm. Bore is 4mm. Supplied complete with a M3 grub screw.
In stock