Author |
Message |
Ben (Diesel) Member Username: Diesel
Post Number: 1 Registered: 11-2007
|
Posted on Tuesday, November 6, 2007 - 9:08 pm: |
|
Let's not actually. Let's talk about bearings instead. Anyone know if the pillow block 4253-012 is self-aligning? Thanx diesel |
Admin (Admin) Board Administrator Username: Admin
Post Number: 621 Registered: 10-2004
|
Posted on Tuesday, November 6, 2007 - 9:12 pm: |
|
Diesel, Yes they are, naturally the bearing is tight in the housing but they will align. |
Ben (Diesel) Member Username: Diesel
Post Number: 2 Registered: 11-2007
|
Posted on Tuesday, November 6, 2007 - 9:14 pm: |
|
Thanks Admin. Are they a ball race? It's not that clear from the website. |
Ben (Diesel) Member Username: Diesel
Post Number: 5 Registered: 11-2007
|
Posted on Wednesday, November 7, 2007 - 7:45 am: |
|
So it's a spherical ball race then? |
Admin (Admin) Board Administrator Username: Admin
Post Number: 622 Registered: 10-2004
|
Posted on Wednesday, November 7, 2007 - 9:17 pm: |
|
Ben, They are basically the same as our bearing inserts (radial ball bearing). The outer bearing surface and the inner housing surface are both spherical for self aligning. Hopefully that helps. |