No data found

Close

Categories

MOD 0.5 Gear Range

Sort by Position: Low to High
48 Per Page
Save 15%
MFA Plastic Pinion 12T 1.9mm
MFA Plastic Pinion 12T 1.9mm
€0.31 €0.26 (€0.32 UK, incl VAT)
4600-008
12 Tooth, 7mm OD with 1.9mm bore.
32 item(s)
End of Line
+ −
Add to wish list
Save 15%
MFA Plastic Double Gear 48/12 2.9mm
MFA Plastic Double Gear 48/12 2.9mm
€0.39 €0.33 (€0.40 UK, incl VAT)
4600-010
48/12 Tooth, 25 / 7mm OD with 2.9mm bore.
21 item(s)
End of Line
+ −
Add to wish list
Save 17%
MFA Plastic Double Gear 48/12 3.1mm
MFA Plastic Double Gear 48/12 3.1mm
€0.40 €0.33 (€0.40 UK, incl VAT)
4600-011
48/12 Tooth, 25 / 7mm OD with 3.1mm bore.
31 item(s)
End of Line
+ −
Add to wish list
MOD 0.5 Pinion Gear
MOD 0.5 Pinion Gear
€0.22 (€0.26 UK, incl VAT)
4600-070
Notes: Pinion gears sold individually but also available in packs of 10 upwards. A 10T pinion gear for an interference fit on a 2mm motor shaft. Nominal...
In Stock
+ −
Add to wish list
MOD 0.5 Double Gear 30/10T 2.9mm Bore
MOD 0.5 Double Gear 30/10T 2.9mm Bore
€0.23 (€0.28 UK, incl VAT)
4600-071
A double gear with 30/10 teeth. OD 16/6mm, width 2.5/4mm, overall width 6.5mm. Intended as an interference fit on a 3mm shaft.
In Stock
+ −
Add to wish list
MOD 0.5 Double Gear 30/10T 3.1mm Bore
MOD 0.5 Double Gear 30/10T 3.1mm Bore
€0.23 (€0.28 UK, incl VAT)
4600-072
A double gear with 30/10 teeth. OD 16/6mm, width 2.5/4mm, overall width 6.5mm. Intended as a slip fit on a 3mm shaft.
In Stock
+ −
Add to wish list
MOD 0.5 Double Gear 50/10T 2.9mm Bore
MOD 0.5 Double Gear 50/10T 2.9mm Bore
€0.28 (€0.33 UK, incl VAT)
4600-073
A double gear with 50/10 teeth. OD 26/6mm, width 2.5/4mm, overall width 6.5mm. Intended as an interference fit on a 3mm shaft.
In Stock
+ −
Add to wish list
MOD 0.5 Double Gear 50/10T 3.1mm Bore
MOD 0.5 Double Gear 50/10T 3.1mm Bore
€0.28 (€0.33 UK, incl VAT)
4600-074
A double gear with 50/10 teeth. OD 26/6mm, width 2.5/4mm, overall width 6.5mm. Intended as a slip fit on a 3mm shaft.
In Stock
+ −
Add to wish list
MOD 0.5 120 tooth gear
MOD 0.5 Gear 120T 2mm Bore
€0.62 (€0.75 UK, incl VAT)
4600-075
When you need that large gear ratio, this MOD 0.5 120 tooth gear is our largest in the range. Overall diameter: 61mm Bore: 2mm Tooth width:...
In Stock
+ −
Add to wish list