No data found

Close

Categories

Testimonials Testimonials

MFA Plastic Pinion 12T 1.9mm

Write a review
£0.27
(£0.32 UK, incl VAT)
Price in points: 54 points
4600-008
1 g
In stock
+ −
Add to wish list
12 Tooth, 7mm OD with 1.9mm bore.

No posts found

Write a review

What material are these made of?

Asked by Dave Cohen | 21/01/2014, 12:58 | 1 answer(s)

is it possible to get a part numb 4600-008 with a 0.9m bore? Mariano

Asked by mariano | 18/09/2012, 09:37 | 1 answer(s)

What's the inner diameter (to the teeth) and length

Asked by E_Eric | 29/04/2012, 12:48 | 1 answer(s)
New post

Customers also bought....

MOD 0.5 Double Gear 50/10T 2.9mm Bore
4600-073
MOD 0.5 Double Gear 50/10T 2.9mm Bore
£0.20 (£0.24 UK, incl VAT)
4600-073
A double gear with 50/10 teeth. OD 26/6mm, width 2.5/4mm, overall width 6.5mm. Intended as an interference fit on a 3mm shaft.
In stock
MOD 0.5 Double Gear 30/10T 3.1mm Bore
4600-072
MOD 0.5 Double Gear 30/10T 3.1mm Bore
£0.17 (£0.20 UK, incl VAT)
4600-072
A double gear with 30/10 teeth. OD 16/6mm, width 2.5/4mm, overall width 6.5mm. Intended as a slip fit on a 3mm shaft.
In stock
MFA Plastic Double Gear 48/12 3.1mm
4600-011
MFA Plastic Double Gear 48/12 3.1mm
£0.35 (£0.42 UK, incl VAT)
4600-011
48/12 Tooth, 25 / 7mm OD with 3.1mm bore.
In stock
Silver Steel 3mm x 333mm
4426-003
Silver Steel 3mm x 333mm
£1.03 (£1.24 UK, incl VAT)
4426-003
Silver Steel 3mm x 333mm
In stock

Minimum quantity for "Silver Steel 3mm x 333mm" is 2.

MOD 0.5 Double Gear 50/10T 3.1mm Bore
4600-074
MOD 0.5 Double Gear 50/10T 3.1mm Bore
£0.20 (£0.24 UK, incl VAT)
4600-074
A double gear with 50/10 teeth. OD 26/6mm, width 2.5/4mm, overall width 6.5mm. Intended as a slip fit on a 3mm shaft.
In stock