No data found

Close

Categories

MakerBeam - M3 Hex Brass Standoff Spacers

£2.24
(£2.69 UK, incl VAT)
Price in points: 449 points
4446-025
14 g
In Stock
+ −
Add to wish list

Electronics and Makerbeam work well together as it is possible to slide the PCB into the beams. Unfortunately, the boards are filled to the edge with electronics and the beams are conductive so mounting a printed circuit board on PCB standoffs (or spacers) could be an easy solution. Our pack contains 4 spacers, 4 nuts, 4 bolts (6mm) and 4 washers. They are all M3 size to complement MakerBeam. You can use the same hex nut driver to fasten the spacers, you do not need another tool.

Customers also bought....

MakerBeam - 90 Degree Corner Bracket
4446-013
MakerBeam - 90 Degree Corner Bracket
£0.53 (£0.64 UK, incl VAT)
4446-013
Corner brackets made from stainless steel strengthen your MakerBeam design.
In Stock
MakerBeam - 90 Degree Angle L Bracket
4446-012
MakerBeam - 90 Degree Angle L Bracket
£0.53 (£0.64 UK, incl VAT)
4446-012
The MakerBeam stainless steel bracket is conveniently engraved with it's angular measurement, although not so conveniently in Tau. 1 Tau = 360 degrees so...
In Stock
MakerBeam - M3 Stainless Steel Plain Nuts of 250
4446-024
MakerBeam - M3 Stainless Steel Plain Nuts of 250
£5.45 (£6.54 UK, incl VAT)
4446-024
A bag of 250 plain M3 stainless steel nuts for the MakerBeam system.
In Stock
MakerBeam - T Bracket
4446-007
MakerBeam - T Bracket
£0.53 (£0.64 UK, incl VAT)
4446-007
The MakerBeam T-brackets (90 degree) are compatible with both MakerBeam and OpenBeam.
In Stock
MakerBeam - M3 Square Head Set Bolts x 6mm Pack of 250
4446-027
MakerBeam - M3 Square Head Set Bolts x 6mm Pack of 250
£11.63 (£13.96 UK, incl VAT)
4446-027
Next generation bolts- These improved bolts are almost the same as the current 6mm bolts, but the head has a hex hole in it and the head diagonal is...
In Stock