No data found

Close

Product filters Product filters

Price

Search resultsProducts found: 339

Sort by Popularity
50 Per Page
12mm pillow block bearing
Makertronics Pillow Block Bearing 12mm Bore
$1.80 ($2.16 UK, incl VAT)
6000-114
From our  Makertronics  branded range of products at Everyday Low Prices. Unlike the large cast steel pillow block bearings youmay be familiar with,...
In Stock
+ −
Add to wish list
Plastic linear bearing LM6LUU
Makertronics Plastic Dry Linear Bearing LM6LUU
$5.59 ($6.70 UK, incl VAT)
6000-170
From our  Makertronics  branded range of products at Everyday Low Prices. These extra long linear bearings are an alternative to the conventional...
In Stock
+ −
Add to wish list
Makertronics SPST 15A Toggle Switch Type E-Ten 1021
Makertronics SPST 15A Toggle Switch Type E-Ten 1021
$0.85 ($1.02 UK, incl VAT)
5100-010
From our  Makertronics  branded range of products at Everyday Low Prices. SPST toggle switch with on/off legend Specification Contact...
Currently Unavailable
No date for new stocks
Add to wish list
11mm tie rod head
Makertronics 3mm Ball Head Tie Rod Joint End - Long
$0.73 ($0.88 UK, incl VAT)
6000-020
From our  Makertronics  branded range of products at Everyday Low Prices. Available in two lengths of 6mm and 11mm, this version is the 11mm...
In Stock
+ −
Add to wish list
Green LED voltmeter
Makertronics 0.28" 3-Wire Digital Green LED Volmeter
$2.81 ($3.36 UK, incl VAT)
5127-002
From our Makertronics branded range of products at Everyday Low Prices. A 3-digit LED voltmeter available in a choice of 4 colours, this version has a...
In Stock
+ −
Add to wish list
Makertronics 4mm Banana Plug Lantern Head Red
Makertronics 4mm Banana Plug Lantern Head Red
$0.19 ($0.23 UK, incl VAT)
5001-020
From our  Makertronics  branded range of products at Everyday Low Prices. 4mm red banana plug with screw fixing for cable. Side hole to insert a...
In Stock
+ −

Minimum quantity for "Makertronics 4mm Banana Plug Lantern Head Red" is 2.

Add to wish list
V Wheel Bearing 6x26x7.5mm
Makertronics V Wheel Bearing 6x26x7.5mm
$1.52 ($1.83 UK, incl VAT)
6000-104
From our  Makertronics  branded range of products at Everyday Low Prices. A wheel of 26mm diameter, 7.5mm wide moulded around a 6mm bore bearing....
In Stock
+ −
Add to wish list
Makertronics DC Power Socket 2.1mm x 5.5mm to Screw Terminal Block
Makertronics DC Power Socket 2.1mm x 5.5mm to Screw Terminal Block
$0.52 ($0.63 UK, incl VAT)
5003-002
From our  Makertronics  branded range of products at Everyday Low Prices. This connector adapts a 5.5 × 2.1 mm DC barrel jack socket to a pair of...
In Stock
+ −
Add to wish list
Male pins for crimp housings
Makertronics Cable Assembly Housing Male Crimp Pin - Pack of 100
$3.05 ($3.66 UK, incl VAT)
5004-038
These male pins are crimped on wires and snapped into our crimp housings (5004-001 to 5004-030) to create custom cables that are compatible with standard...
In Stock
+ −
Add to wish list
Makertronics Orange Wheel 30x10.5mm for 2mm Shafts
Makertronics Orange Wheel 30x10.5mm for 2mm Shafts
$0.52 ($0.63 UK, incl VAT)
6000-513
From our  Makertronics  branded range of products at Everyday Low Prices. For the smaller model, these wheels are designed for an interference fit...
In Stock
+ −
Add to wish list
8-channel opto isolated relay board
Makertronics 5V 8-Channel 10A Opto Isolated Relay Module
$9.92 ($11.91 UK, incl VAT)
5107-206
From our  Makertronics  branded range of products at Everyday Low Prices. Specifications Number of Channels: 8 Coil Voltage: 5V...
In Stock
+ −
Add to wish list
Makertronics TO220 Black Heatsink 25x23x16mm with Pins
Makertronics TO220 Black Heatsink 25x23x16mm with Pins
$0.52 ($0.63 UK, incl VAT)
5110-014
From our  Makertronics  branded range of products at Everyday Low Prices. Aluminium heatsink for TO220 devices. Size is 25mm high, 23mm wide and...
In Stock
+ −
Add to wish list
N20 6V 30 rpm micro metal gear motor
Makertronics 6V 30 RPM N20 Micro Metal Gear Motor
$5.32 ($6.39 UK, incl VAT)
6010-061
From our Makertronics branded range of products at Everyday Low Prices. GA12 N20 Micro metal geared motors available in various ratios giving nominal...
In Stock
+ −
Add to wish list
623ZZ model bearing 3mm bore
Makertronics 623ZZ Budget Bearing 3x10x4mm Pack of 10
$3.35 ($4.02 UK, incl VAT)
6000-120
From our  Makertronics  branded range of products at Everyday Low Prices. For over 20 years, the bearings we supply have come from a few trusted...
In Stock
+ −
Add to wish list
Mini LED Voltmeter
Makertronics 0.28" 3-Wire Digital Red LED Volmeter
$2.40 ($2.88 UK, incl VAT)
5127-001
From our Makertronics branded range of products at Everyday Low Prices. A 3-digit LED voltmeter available in a choice of 4 colours, this version has a red...
In Stock
+ −
Add to wish list
Makertronics Wheel 68x24.5mm for 5.4x3.7mm Motor Shafts
Makertronics Wheel 68x24.5mm for 5.4x3.7mm Motor Shafts
$0.93 ($1.11 UK, incl VAT)
6000-510
From our  Makertronics  branded range of products at Everyday Low Prices. A rather nice wheel for larger models. It has a removeable tyre of around...
In Stock
+ −
Add to wish list
Makertronics 560 Piece Jumper Wire Kit
Makertronics 560 Piece Jumper Wire Kit
$7.60 ($9.13 UK, incl VAT)
5115-031
From our  Makertronics  branded range of products at Everyday Low Prices. A kit of approximately 560 jumper wires for use with breadboards. Supplied...
In Stock
+ −
Add to wish list
Makertronics Pack of 5, 10-way Crimp Housings for Pre-Crimped Wires
Makertronics Pack of 5, 10-way Crimp Housings for Pre-Crimped Wires
$0.45 ($0.55 UK, incl VAT)
5004-010
From our  Makertronics  branded range of products at Everyday Low Prices. Make up custom cables for board to board connections with our crimp...
In Stock
+ −
Add to wish list
80Channel relay module 12V 10A
Makertronics 12V 8-Channel 10A Opto Isolated Inline Relay Module
$7.60 ($9.13 UK, incl VAT)
5107-203
From our  Makertronics  branded range of products at Everyday Low Prices. Specifications Number of Channels: 8 Coil Voltage: 12V...
In Stock
+ −
Add to wish list
Makertronics Rotary Switch 4P 3W Break Before Make Splined Shaft
Makertronics Rotary Switch 4P 3W Break Before Make Splined Shaft
$1.58 ($1.90 UK, incl VAT)
5100-104
From our  Makertronics  branded range of products at Everyday Low Prices. 4-pole 3-way rotary switch with a splined 18T shaft. Specification...
In Stock
+ −
Add to wish list
4-channel 30A relay board
Makertronics 5V High Power 30A Quad Relay Module
$20.90 ($25.08 UK, incl VAT)
5107-200
From our  Makertronics  branded range of products at Everyday Low Prices. Specifications Number of Channels: 4 Coil Voltage: 5V...
In Stock
+ −
Add to wish list
Yellow LED voltmeter
Makertronics 0.28" 3-Wire Digital Yellow LED Volmeter
$2.59 ($3.11 UK, incl VAT)
5127-003
From our Makertronics branded range of products at Everyday Low Prices. A 3-digit LED voltmeter available in a choice of 4 colours, this version has a...
In Stock
+ −
Add to wish list
Dual opto isolated relay module 5V
Makertronics 5V Dual 10A Opto Isolated Relay Module
$1.92 ($2.31 UK, incl VAT)
5107-201
From our  Makertronics  branded range of products at Everyday Low Prices. Specifications Number of Channels: 2 Coil Voltage: 5V...
In Stock
+ −
Add to wish list
Makertronics 100mm Pre-Tinned Equipment Wire Red + Black, Pack of 50
Makertronics 100mm Pre-Tinned Equipment Wire Red + Black, Pack of 50
$1.11 ($1.34 UK, incl VAT)
5040-001
From our  Makertronics  branded range of products at Everyday Low Prices. 7/0.2 stranded equipment wire in 100mm lengths with pre-stripped and...
In Stock
+ −
Add to wish list
Makertronics DPST 15A Toggle Switch Type E-Ten 1221
Makertronics DPST 15A Toggle Switch Type E-Ten 1221
$0.98 ($1.17 UK, incl VAT)
5100-013
From our  Makertronics  branded range of products at Everyday Low Prices. DPST toggle switch with on/off legend Specification Contact...
In Stock
+ −
Add to wish list
41mm tie rod
Makertronics Stainless / Aluminium 3mm Pull Rod 41mm
$3.97 ($4.76 UK, incl VAT)
6000-021
From our  Makertronics  branded range of products at Everyday Low Prices. These tie rods are rather nice and available in four different nominal...
In Stock
+ −
Add to wish list
CP2102 USB to TTL Serial Adapter
Makertronics CP2102 USB to TTL Serial Adaptor
$5.60 ($6.73 UK, incl VAT)
5200-100
From our  Makertronics  branded range of products at Everyday Low Prices. A CP2102 based USB to TTL serial adapter with 100cm lead.  Red line =...
In Stock
+ −
Add to wish list
Makertronics Pack of 10, 2x5-way Crimp Housings for Pre-Crimped Wires
Makertronics Pack of 10, 2x5-way Crimp Housings for Pre-Crimped Wires
$0.91 ($1.09 UK, incl VAT)
5004-025
From our  Makertronics  branded range of products at Everyday Low Prices. Make up custom cables for board to board connections with our crimp...
In Stock
+ −
Add to wish list
Makertronics Wheel 38x4mm for 5.4x3.7mm Motor Shafts
Makertronics Wheel 38x4mm for 5.4x3.7mm Motor Shafts
$0.22 ($0.26 UK, incl VAT)
6000-516
From our  Makertronics  branded range of products at Everyday Low Prices. A narrow wheel with an 'O' ring for a tyre. The wheel can be attached to...
In Stock
+ −
Add to wish list
HTD5M Belt Clamp for 15mm wide belts
5mm Pitch HTD5M 15x70mm Belt Clamp
$4.64 ($5.57 UK, incl VAT)
6001-101
From our  Makertronics  branded range of products at Everyday Low Prices. A 5mm pitch aluminium HTD5M belt clamp. Suitable for use with 15mm wide...
In Stock
+ −
Add to wish list
6V 500rpm dc motor
Makertronics 6V 500 RPM N20 Micro Metal Gear Motor
$5.32 ($6.39 UK, incl VAT)
6010-067
From our Makertronics branded range of products at Everyday Low Prices. GA12 N20 Micro metal geared motors available in various ratios giving nominal...
Out of stock
+ −
Add to wish list
Arduino relay shield 4-channel
Makertronics 5V Transistor Input Quad 3A Relay Arduino Shield
$6.20 ($7.44 UK, incl VAT)
5107-205
From our  Makertronics  branded range of products at Everyday Low Prices. Relay shield for Arduino Uno controllers Specifications...
In Stock
+ −
Add to wish list
Pack of 100 cable assembly female pins
Makertronics Cable Assembly Housing Female Crimp Pin - Pack of 100
$4.52 ($5.43 UK, incl VAT)
5004-039
These female pins are crimped on wires and snapped into our crimp housings (5004-001 to 5004-030) to create custom cables that are compatible with standard...
Currently Unavailable
No date for new stocks
+ −
Add to wish list
T8 Lead screw 300mm long
Makertronics 300mm Long Stainless Steel T8 Lead Screw with Brass Nut
$5.31 ($6.36 UK, incl VAT)
6003-593
From our Makertronics branded range of products at Everyday Low Prices. T8 stainless steel 300mm long lead screw with a matching brass T8 nut. Screw is...
In Stock
+ −
Add to wish list
Makertronics Red Wheel 30x10.5mm for 2mm Shafts
Makertronics Red Wheel 30x10.5mm for 2mm Shafts
$0.52 ($0.63 UK, incl VAT)
6000-514
From our  Makertronics  branded range of products at Everyday Low Prices. For the smaller model, these wheels are designed for an interference fit...
In Stock
+ −
Add to wish list
Makertronics Rotary Switch 3P 4W Break Before Make Splined Shaft
Makertronics Rotary Switch 3P 4W Break Before Make Splined Shaft
$1.38 ($1.65 UK, incl VAT)
5100-103
From our  Makertronics  branded range of products at Everyday Low Prices. 3-pole 4-way rotary switch with a splined 18T shaft. Specification...
In Stock
+ −
Add to wish list
8-channel relay board 5V
Makertronics 5V 8-Channel 10A Opto Isolated Inline Relay Module
$7.60 ($9.13 UK, incl VAT)
5107-204
From our  Makertronics  branded range of products at Everyday Low Prices. Specifications Number of Channels: 8 Coil Voltage: 5V...
In Stock
+ −
Add to wish list
8mm Collar
Makertronics Heavy Duty 8mm Zinc Collar
$0.69 ($0.83 UK, incl VAT)
6004-008
From our Makertronics branded range of products at Everyday Low Prices. 8mm zinc collar Bore: 8mm Overall diameter: 14mm Depth: 7mm
In Stock
+ −
Add to wish list
Makertronics Pack of 20 Red 5mm LED
Makertronics Pack of 20 Red 5mm LED
$0.52 ($0.63 UK, incl VAT)
5440-001
From our  Makertronics  branded range of products at Everyday Low Prices. A pack of 20 5mm red LEDs with a forward current of 2mA to 20mA. Forward...
In Stock
+ −
Add to wish list
Makertronics Rotary Switch 2P 6W Break Before Make Splined Shaft
Makertronics Rotary Switch 2P 6W Break Before Make Splined Shaft
$1.74 ($2.09 UK, incl VAT)
5100-102
From our  Makertronics  branded range of products at Everyday Low Prices. 2-pole 6-way rotary switch with a splined 18T shaft. Specification...
In Stock
+ −
Add to wish list
T8 Lead screw 100mm long
Makertronics 100mm Long Stainless Steel T8 Lead Screw with Brass Nut
$4.13 ($4.95 UK, incl VAT)
6003-591
From our Makertronics branded range of products at Everyday Low Prices. T8 stainless steel 100mm long lead screw with a matching brass T8 nut. Screw is...
In Stock
+ −
Add to wish list
Makertronics Pack of 20 Yellow 5mm LED
Makertronics Pack of 20 Yellow 5mm LED
$0.84 ($1.01 UK, incl VAT)
5440-002
From our  Makertronics  branded range of products at Everyday Low Prices. A pack of 20 5mm yellow LEDs with a forward current of 5mA to 20mA. Forward...
In Stock
+ −
Add to wish list
Transistor input relay module 10A
Makertronics 5V Transistor Input 10A Relay Module
$0.97 ($1.16 UK, incl VAT)
5107-202
From our  Makertronics  branded range of products at Everyday Low Prices. Specifications Number of Channels: 1 Coil Voltage: 5V...
In Stock
+ −
Add to wish list
Makertronics Pack of 100 Mixed LEDs
Makertronics Pack of 100 Mixed LEDs
$4.00 ($4.80 UK, incl VAT)
5440-010
From our  Makertronics  branded range of products at Everyday Low Prices. A pack of 100 assorted LEDs in two sizes of 3mm and 5mm in 5 colours....
In Stock
+ −
Add to wish list
Makertronics Narrow Hard Wheel 28x2.2mm for 2mm Shafts
Makertronics Narrow Hard Wheel 28x2.2mm for 2mm Shafts
$0.13 ($0.15 UK, incl VAT)
6000-515
From our  Makertronics  branded range of products at Everyday Low Prices. For the smaller model where a low rolling resistance is needed, these...
In Stock
+ −
Add to wish list
Makertronics 48mm Mecanum Wheel Set, 2 Left + 2 Right
$16.36 ($19.64 UK, incl VAT)
6000-500
From our  Makertronics  branded range of products at Everyday Low Prices. A pack of 4 mecanum 48mm diameter x 25mm wide wheels consisting of two left...
In Stock
+ −
Add to wish list
Makertronics Pack of 5, 2x9-way Crimp Housings for Pre-Crimped Wires
Makertronics Pack of 5, 2x9-way Crimp Housings for Pre-Crimped Wires
$0.78 ($0.94 UK, incl VAT)
5004-029
From our  Makertronics  branded range of products at Everyday Low Prices. Make up custom cables for board to board connections with our crimp...
In Stock
+ −
Add to wish list
Makertronics SPDT Miniature Toggle Switch
Makertronics SPDT Miniature Toggle Switch
$0.69 ($0.83 UK, incl VAT)
5100-001
From our  Makertronics  branded range of products at Everyday Low Prices. With rising costs, we seeked out a lower cost alternative to our 1610-111...
In Stock
+ −
Add to wish list
Makertronics Pack of 5, 2x6-way Crimp Housings for Pre-Crimped Wires
Makertronics Pack of 5, 2x6-way Crimp Housings for Pre-Crimped Wires
$0.55 ($0.66 UK, incl VAT)
5004-026
From our  Makertronics  branded range of products at Everyday Low Prices. Make up custom cables for board to board connections with our crimp...
In Stock
+ −
Add to wish list
Makertronics Pack of 10, 2x3-way Crimp Housings for Pre-Crimped Wires
Makertronics Pack of 10, 2x3-way Crimp Housings for Pre-Crimped Wires
$0.61 ($0.74 UK, incl VAT)
5004-023
From our  Makertronics  branded range of products at Everyday Low Prices. Make up custom cables for board to board connections with our crimp...
In Stock
+ −
Add to wish list
 Prev
1 2 3 4 5 6 7
Next