No data found

Close

Product filters Product filters

Price

Search resultsProducts found: 104

Sort Alphabetically: Z to A
24 Per Page
Save 67%
Pololu Alphanumeric LCD Display 16x2 + BL
Pololu Alphanumeric LCD Display 16x2 + BL
£13.49 £4.50 (£5.40 UK, incl VAT)
2109-168
This 16x LCD packs 32 characters into an outline smaller than that of most two-line displays. An LED backlight enables optimal viewing in all lighting...
1 item(s)
End of Line
+ −
Add to wish list
Save 67%
Pololu Alphanumeric LCD Display 16x2
Pololu Alphanumeric LCD Display 16x2
£10.37 £3.46 (£4.15 UK, incl VAT)
2109-167
This 16 character x 2 line LCD packs 32 characters into an outline smaller than that of most two-line displays. This unit uses the HD44780 interface found...
2 item(s)
End of Line
+ −
Add to wish list
Save 67%
Pink Enclosure for the Raspberry Pi
Pink Enclosure for the Raspberry Pi
£7.53 £2.51 (£3.01 UK, incl VAT)
3808-013
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect it with one...
3 item(s)
End of Line
+ −
Add to wish list
Save 41%
NTC Thermistor 20k
NTC Thermistor 20k
£0.27 £0.16 (£0.19 UK, incl VAT)
3801-150
NTC Thermistor 20k
31 item(s)
End of Line
+ −

Minimum quantity for "NTC Thermistor 20k" is 4.

Add to wish list
Save 41%
NTC Thermistor 1k
NTC Thermistor 1k
£0.27 £0.16 (£0.19 UK, incl VAT)
3801-140
NTC Thermistor 1k
14 item(s)
End of Line
+ −

Minimum quantity for "NTC Thermistor 1k" is 4.

Add to wish list
Save 47%
Nintendo DS Touch Screen Connector
Nintendo DS Touch Screen Connector
£0.75 £0.40 (£0.48 UK, incl VAT)
2109-351
This is the SMD connector for the Nintendo DS touch screen, see related products below. 4-pin right angle ZIF connector at 0.5 mm pitch. Also available ready...
9 item(s)
End of Line
+ −

Minimum quantity for "Nintendo DS Touch Screen Connector" is 3.

Add to wish list
Save 67%
MPR121 Capacitive Touch Keypad
MPR121 Capacitive Touch Keypad
£24.09 £8.03 (£9.64 UK, incl VAT)
1615-105
The MPR121 capacitive keypad uses the MPR121 and 12 touch sensitive pads to give you a simple 'keypad' with an I2C output. The board also has four mounting...
1 item(s)
End of Line
+ −
Add to wish list
Save 67%
MPL3115A2 Altitude / Pressure Sensor
MPL3115A2 Altitude / Pressure Sensor
£13.55 £4.52 (£5.42 UK, incl VAT)
3801-322
The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high...
2 item(s)
End of Line
+ −
Add to wish list
Save 25%
Miniature Enclosed Vertical Preset 2k
Miniature Enclosed Vertical Preset 2k
£0.36 £0.27 (£0.32 UK, incl VAT)
2000-724
A miniature single turn cermet potentiometers, sealed to withstand industrial cleaning solvents and harsh environments with moulded PCB stand offs....
12 item(s)
End of Line
+ −

Minimum quantity for "Miniature Enclosed Vertical Preset 2k" is 2.

Add to wish list
Save 47%
LSM303 Breakout Board - Tilt Compensated Compass
LSM303 Breakout Board - Tilt Compensated Compass
£30.11 £16.06 (£19.27 UK, incl VAT)
3801-017
The LSM303DLH is a triple axis accelerometer combined with a triple axis magnetic sensor. This breakout board uses the LSM303DLH to give a you the data you...
1 item(s)
End of Line
+ −
Add to wish list
Save 47%
Load Sensor - 50kg
Load Sensor - 50kg
£10.54 £5.62 (£6.74 UK, incl VAT)
3813-030
This load sensor is the same one found in digital bathroom scales (you know, the ones you use in January for your New Year's resolutions, and then forget...
2 item(s)
End of Line
+ −
Add to wish list
Save 47%
LiPo Charger Basic - Mini-USB
LiPo Charger Basic - Mini-USB
£7.53 £4.02 (£4.82 UK, incl VAT)
2900-469
If you need to charge LiPo batteries, this simple charger will do just that. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the...
11 item(s)
End of Line
+ −
Add to wish list
Save 47%
Line Follower Analogue Sensor
Line Follower Analogue Sensor
£3.47 £1.85 (£2.22 UK, incl VAT)
2110-620
This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to...
3 item(s)
End of Line
+ −
Add to wish list
Save 67%
LilyPad XBee
LilyPad XBee
£15.06 £5.02 (£6.02 UK, incl VAT)
2904-860
Description: The is a breakout board for the popular XBee modules. Board includes easy-to-sew tabs and all the necessary power regulation to run on the...
2 item(s)
End of Line
+ −
Add to wish list
Save 67%
LilyPad Slide Switch
LilyPad Slide Switch
£4.52 £1.51 (£1.81 UK, incl VAT)
2904-841
Description: This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. LilyPad is a...
4 item(s)
End of Line
+ −
Add to wish list
Save 67%
LilyPad LED White (5pcs)
LilyPad LED White (5pcs)
£4.52 £1.51 (£1.81 UK, incl VAT)
2904-820
Description: A simple, very bright, 250mcd, white LED LilyPad. Light up the night! 5 pcs. LilyPad is a wearable e-textile technology developed by Leah...
3 item(s)
End of Line
+ −
Add to wish list
Save 67%
LilyPad FTDI Basic Breakout - 5V
LilyPad FTDI Basic Breakout - 5V
£13.55 £4.52 (£5.42 UK, incl VAT)
2904-852
Description: This is the LilyPad revision of the FTDI Basic . It is the same as our other FTDI Basic, but has a purple LilyPad board which is half the...
1 item(s)
End of Line
+ −
Add to wish list
Save 67%
LilyPad Coin Cell Battery Holder
LilyPad Coin Cell Battery Holder
£5.27 £1.76 (£2.11 UK, incl VAT)
2904-840
Description: If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick. It's a...
4 item(s)
End of Line
+ −
Add to wish list
Save 67%
LilyPad Arduino Simple Board
LilyPad Arduino Simple Board
£19.57 £6.52 (£7.82 UK, incl VAT)
2904-851
Description: This is the LilyPad Arduino Simple Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad...
2 item(s)
End of Line
+ −
Add to wish list
Save 69%
LED Bright Blue 4000mCd
LED Bright Blue 4000mCd
£0.80 £0.25 (£0.30 UK, incl VAT)
2110-531
These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. All lenses are clear.   Specification...
7 item(s)
End of Line
+ −
Add to wish list
Save 47%
LED - SMD RGB
LED - SMD RGB
£0.75 £0.40 (£0.48 UK, incl VAT)
2110-100
These are the same RGB LEDs that are used for the WS2801 breakout board. They're great when you need a lot of color from not a lot of board space....
79 item(s)
End of Line
+ −

Minimum quantity for "LED - SMD RGB" is 2.

Add to wish list
Save 47%
Laser Module Mount
Laser Module Mount
£5.27 £2.81 (£3.37 UK, incl VAT)
2110-053
Description: Every laser needs a holder! This custom designed plastic mount fits the SparkFun flat laser modules. Insert the module into the mount and the...
1 item(s)
End of Line
+ −
Add to wish list
Save 67%
ISL29125 RGB Light Sensor
ISL29125 RGB Light Sensor
£7.53 £2.51 (£3.01 UK, incl VAT)
2900-634
If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements,...
2 item(s)
End of Line
+ −
Add to wish list
Save 47%
IR Receiver Breakout Board
IR Receiver Breakout Board
£9.03 £4.82 (£5.78 UK, incl VAT)
2900-434
Description: This is a very small infrared receiver based on the TSOP85 receiver from Vishay. This receiver has all the filtering and 38kHz demodulation...
1 item(s)
End of Line
+ −
Add to wish list
 Prev
1 2 3 4 5
Next