Search resultsProducts found: 43

£3.67 £3.85 (£3.21 exc. tax)
1400-037
These are a pair of hobby gearmotors from DAGU.  The output shaft is 10mm long x 5.5mm diameter (with double flats). See here for suitable wheels.... read more
1 item(s)
End of line, less than 2 remaining
+
Add to wish list

£3.67 £3.85 (£3.21 exc. tax)
1400-038
These are a pair of right angle, hobby gearmotors from DAGU. They offer a cheap and easy to use setup to get your wheels turning. Due to these gear motors... read more
2 item(s)
End of line, less than 3 remaining
+
Add to wish list

£4.87 £4.28 (£3.57 exc. tax)
1451-001
This 224:1 gearmotor (gearbox with motor) is a great low-cost alternative to modified hobby servos. The low-current motor is a perfect match for our micro... read more
10 item(s)
End of line, less than 11 remaining
+
Add to wish list

£4.87 £4.28 (£3.57 exc. tax)
1451-003
GM6, which is a baby version of our popular GM2 gear motor. Designed by Mark Tilden, the GM6 has tighter tolerances and better performance than a regular... read more
2 item(s)
End of line, less than 3 remaining
+
Add to wish list

£8.26 £7.26 (£6.05 exc. tax)
1451-007
81:1, 454RPM, 20mA (220mA stall) at 6V gives 3.17in*oz torque. Not bad, eh? And only available from Solarbotics ! These little gear motors measure 20.8 x... read more
6 item(s)
End of line, less than 7 remaining
+
Add to wish list

£10.16 £8.94 (£7.45 exc. tax)
1451-008
Solarbotics had Grand-Wing Servo supply them with an inventory of their modified GWS05 servo! It's a servo body, with servo gears, but with continuous... read more
2 item(s)
End of line, less than 3 remaining
+
Add to wish list

£13.50 £11.88 (£9.90 exc. tax)
1451-012
Practically identical to the now out-of-production GM13 Sanyo NA3S, this gear motor offers a bit more speed at less cost to you! The major difference... read more
6 item(s)
End of line, less than 7 remaining
+
Add to wish list

£13.50 £11.88 (£9.90 exc. tax)
1451-016
2 item(s)
End of line, less than 3 remaining
+
Add to wish list

£13.50 £11.88 (£9.90 exc. tax)
1451-010
If you're looking for a speedy motor with a reasonable amount of torque (for say, moving a small robot that isn't going to fight in a Sumo contest), the... read more
6 item(s)
End of line, less than 7 remaining
+
Add to wish list

£12.70 £11.17 (£9.31 exc. tax)
1451-014
Looking for a tiny gear motor? Only from Solarbotics comes the GM15, measuring under 6mm diameter, with an overall length of 20mm , which is smaller than... read more
1 item(s)
End of line, less than 2 remaining
+
Add to wish list

£5.14 £4.93 (£4.11 exc. tax)
1451-030
This 60:1 gearmotor (gearbox with motor) is a low-cost way to drive small- to medium-sized robots. It is similar to the Solarbotics offset-output gear... read more
5 item(s)
End of line, less than 6 remaining
+
Add to wish list

£12.64 £11.12 (£9.27 exc. tax)
1505-001
Want to turn a servo into a more powerful gear motor? The Secret Motor Driver Kit replaces the guts of a standard servo with a logic-signal friendly L293D... read more
4 item(s)
End of line, less than 5 remaining
+
Add to wish list

£1.24 £1.09 (£0.91 exc. tax)
1451-101
The provided mounting holes in the GM2/GM8 gear motors are a convenient way to mount these to your project but sometimes you just need a different way to... read more
16 item(s)
End of line, less than 17 remaining
+
Add to wish list

£6.89 £7.16 (£5.97 exc. tax)
2900-413
The TB6612FNG motor driver from Sparkfun ROB-09457 can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and... read more
6 item(s)
End of line, less than 7 remaining
+
Add to wish list

£3.87 £3.89 (£3.24 exc. tax)
1400-055
Including propellor, shaft, stem sleeve, bracket, electric motor type R21 and fixings. read more
3 item(s)
End of line, less than 4 remaining
+
Add to wish list

£9.96 £8.50 (£7.08 exc. tax)
1453-067
The power at the heart of the HUB-ee, these gear motors are based on the standard 12mm 'Sanyo' form factor but with a modified shaft. The shaft has a... read more
5 item(s)
End of line, less than 6 remaining
+
Add to wish list

£1.00 £0.84 (£0.70 exc. tax)
1453-073
These 8mm long (5mm across flats) brass spacers are used in the HUB-ee wheels to provide threads for screwing the wheels to a robot chassis. This version... read more
4 item(s)
End of line, less than 5 remaining
+
Add to wish list

£3.90 £2.88 (£2.40 exc. tax)
1453-081
This little board splits the HUB-ee 8 way micro-match cable two ways, allowing you to drive two wheels synchronously. The sensor lines from one connector... read more
4 item(s)
End of line, less than 5 remaining
+
Add to wish list

£7.25 £5.35 (£4.46 exc. tax)
1453-082
This PCB lets you plug four HUB-ee wheels into one controller for synchronous drive (i.e. all the wheels plugged into this PCB will get the same control... read more
2 item(s)
End of line, less than 3 remaining
+
Add to wish list

£2.08 £1.38 (£1.15 exc. tax)
1453-083
This handy PCB breaks out the 8 wires from a HUB-ee connector into a single 2.54mm (0.1") row of pins making it super easy to plug a HUB-ee wheel into a... read more
4 item(s)
End of line, less than 5 remaining
+
Add to wish list

£6.45 £4.52 (£3.77 exc. tax)
1453-085
V1.1 now available with a couple of previous issues corrected. Designed to drive two HUB-ee BMD-S wheels with optional quadrature encoder feedback.... read more
2 item(s)
End of line, less than 3 remaining
+
Add to wish list

£34.52 £19.33 (£16.11 exc. tax)
1503-002
This low-voltage version is designed specifically for high-performance, low-voltage motors that run on 1.5 - 6 V. Because they run at lower voltages, these... read more
3 item(s)
End of line, less than 4 remaining
+
Add to wish list

£21.80 £22.88 (£19.07 exc. tax)
1519-003
A 4 Channel 1.5A DC Motor Driver, FD04A is specially designed to drive four DC brush motors which is needed for example on Omni drive mobile robots. With... read more
1 item(s)
End of line, less than 2 remaining
+
Add to wish list

£51.81 £55.96 (£46.63 exc. tax)
1503-038
The Pololu Simple High-Power Motor Controller makes basic control of brushed DC motors easy, with our free Simple Motor Control Center software enabling... read more
1 item(s)
End of line, less than 2 remaining
+
Add to wish list

£47.49 £51.29 (£42.74 exc. tax)
1503-036
The Pololu Simple High-Power Motor Controller makes basic control of brushed DC motors easy, with our free Simple Motor Control Center software enabling... read more
2 item(s)
End of line, less than 3 remaining
+
Add to wish list

£4.13 £4.30 (£3.58 exc. tax)
1400-010
Description: A vibration motor! This itty-bitty, shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to... read more
11 item(s)
End of line, less than 12 remaining
+
Add to wish list

£2.59 £2.70 (£2.25 exc. tax)
1402-061
A 5V geared stepper motor. The stepper motor has a step angle of 5.625 degrees (64 steps per revolution) with a 64:1 ratio gearbox giving an effective 4096... read more
1 item(s)
End of line, less than 2 remaining
+
Add to wish list

£2.59 £2.70 (£2.25 exc. tax)
1402-062
A 5V geared stepper motor. The stepper motor has a step angle of 5.625 degrees (64 steps per revolution) with a 64:1 ratio gearbox giving an effective 4096... read more
8 item(s)
End of line, less than 9 remaining
+
Add to wish list

£4.30 £3.78 (£3.15 exc. tax)
1451-018
Want to build something itty bitty? Try these: Just 4mm (0.158") diameter and an overall length of 16.4mm (0.65") with an output shaft diameter of 0.66mm... read more
5 item(s)
End of line, less than 6 remaining
+
Add to wish list

£8.08 £8.48 (£7.07 exc. tax)
1402-051
Description:  These small steppers are a great way to get things moving, especially when positioning and repeatability is a concern. Features:... read more
3 item(s)
End of line, less than 4 remaining
+
Add to wish list

£0.48 £0.43 (£0.36 exc. tax)
1441-013
A 19mm plated steel motor bracket that provides a secure clamp around motors with a body diameter of 19mm but we find that it is also ideal for 21mm motors... read more
Currently Unavailable
Discontinued Product

£31.39 £32.95 (£27.46 exc. tax)
1519-012
SmartDriveDuo-10 Cytron's 1st smart motor driver dual channels, the SmartDriveDuo10. It is a smart brush motor driver, support dual channels, 10A... read more
2 item(s)
End of line, less than 3 remaining
+
Add to wish list

£3.37 £2.96 (£2.47 exc. tax)
1451-017
These new, factory-fresh (not surplus!) motors are comparable in performance and quality to the originals. The only major difference is the lack of a... read more
9 item(s)
End of line, less than 10 remaining
+
Add to wish list

£7.49 £8.39 (£6.99 exc. tax)
1452-004
The 3-speed crank-axle gearbox looks very much like half of the twin-motor gearbox; it even uses the same gears. This compact gearbox gives you options for... read more
2 item(s)
End of line, less than 3 remaining
+
Add to wish list

£24.15 £27.05 (£22.54 exc. tax)
1503-007
The Pololu high-power motor drivers are compact carriers for the VNH3SP30 and VNH2SP30 (see 1503-008 related products below) motor driver integrated circuits... read more
3 item(s)
End of line, less than 4 remaining
+
Add to wish list

£30.20 £33.83 (£28.19 exc. tax)
1503-008
The VNH2SP30 version of 1503-007 above which offers improved rating and current sense. Description for 1503-007: The Pololu high-power motor drivers are... read more
2 item(s)
End of line, less than 3 remaining
+
Add to wish list

£51.81 £58.02 (£48.35 exc. tax)
1503-010
The VNH2SP30 version of 1503-009 which offers improved rating and current sense   Description for 1503-009: The Pololu dual high-power motor... read more
2 item(s)
End of line, less than 3 remaining
+
Add to wish list

£13.58 £14.12 (£11.77 exc. tax)
1452-008
The high-speed gearbox can be assembled in 11.6:1 and 18:1 gear ratios. The high-efficiency gearbox is therefore suited for very fast vehicles or other fast... read more
7 item(s)
End of line, less than 8 remaining
+
Add to wish list

£13.58 £14.12 (£11.77 exc. tax)
1452-009
With possible gear ratios of 41.7:1 and 64.8:1, this gearbox is well-suited for most vehicles that require a balance of speed and torque. The motor is... read more
1 item(s)
End of line, less than 2 remaining
+
Add to wish list

£13.47 £14.00 (£11.67 exc. tax)
1452-016
Overview The mini-motor gearbox kit from Tamiya makes it easy to get a small robot or plastic model moving. The kit includes one motor and all the gears... read more
3 item(s)
End of line, less than 4 remaining
+
Add to wish list

£0.30 £0.22 (£0.18 exc. tax)
1451-105
This 1.7 (dia) x 0.35 (mm/thd) x 4mm long bolt exactly matches the unique thread on the two bolt-holes on the faceplates of the GM11a, GM12a, GM13a, and... read more
25 item(s)
End of line, less than 26 remaining
+
Add to wish list

£2.94 £3.29 (£2.74 exc. tax)
1458-422
These low voltage sleeve bearing DC fans are both reliable and quiet. Motor: Brushless DC, auto restart impedance and polarity protected... read more
1 item(s)
End of line, less than 2 remaining
+
Add to wish list

£4.13 £4.62 (£3.85 exc. tax)
1458-826
Prevent the components of your PC tower from overheating with this low voltage sleeve bearing box fan. The 12V version is commonly used as a computer... read more
1 item(s)
End of line, less than 2 remaining
+
Add to wish list