| Author |
Message |
Shawar
Unregistered guest
|
| Posted on Friday, October 20, 2006 - 11:33 am: |
  |
Like to know if an order can be made for a turntable pulley. I will need two alum pulleys.
Measurements are
Bore 2.9 mm and 3 mm
Diameter 10 mm
Length 10 mm |
Admin (Admin)
Board Administrator
Username: Admin
Post Number: 299
Registered: 10-2004
|
| Posted on Tuesday, October 24, 2006 - 7:47 pm: |
|
Hi,
All of our pulleys come in from the far east and whilst we have machining facilities, it would not be economical for us to make them. Sorry we cannot help. |
stephen felgate
Unregistered guest
|
| Posted on Tuesday, May 1, 2007 - 7:26 pm: |
|
Hello,
Could you please view the attached picture and advise me if possible if you can supply the pullies that are shown in the picture. |
Admin (Admin)
Board Administrator
Username: Admin
Post Number: 474
Registered: 10-2004
|
| Posted on Thursday, May 3, 2007 - 7:07 am: |
|
Hi,
It is unlikely that those pulleys are standard 'off the shelf' but manufactured by the model maker. Our pulleys are for timing belts or 'V' belts both of which are not suitable for you. It's not possible to tell from the picture the dimensions but they look relatively easy to machine from stock bar. See if you can find a model maker with a small lathe to machine these up if the original manufacturer is no longer able to help. |
