No data found

Close

Categories

300mm MGN9R + 2 x MGN9H Linear Slide Rail & Carriages

£22.15
(£26.58 UK, incl VAT)
6000-232
170 g
In Stock
+ −
Add to wish list

A 200mm long MGN9R rail with two fitted MGN9H carriages.

  • MGN9 Series:
  • Rail Length: 300mm
  • Rail Width: 9mm
  • Each Carriage Length: 40.6mm
  • Carriage Width: 20mm
  • Carriage Height on Rail: 10mm
  • Carriage Threaded Holes x 4:M3*3
  • Rail Holes Diameter: 3.3mm

Customers also bought....

GT2/2GT Pulley 30 teeth 6mm bore
6002-013
30 Tooth 6mm Bore 2mm Pitch GT2 Pulley for 10mm Belts
£2.35 (£2.82 UK, incl VAT)
6002-013
A 2mm pitch aluminium GT2 timing pulley complete with 2 x grub screws. Suitable for use with our GT2/2GT rounded tooth profile timing belts....
In Stock
GT2/2GT Pulley 60 teeth 8mm bore
6002-046
60 Tooth 8mm Bore 2mm Pitch GT2 Pulley for 10mm Belts
£3.70 (£4.44 UK, incl VAT)
6002-046
A 2mm pitch aluminium GT2 timing pulley complete with 2 x grub screws. Suitable for use with our GT2/2GT rounded tooth profile timing belts....
In Stock
GT2 belt 92 tooth 184mm
6001-362
6mm Wide GT2 / 2GT 2mm Pitch Rounded Tooth Profile 184mm Closed Belt
£1.20 (£1.44 UK, incl VAT)
6001-362
A 2mm pitch, 92 tooth (184mm long), 6mm wide fibreglass reinforced 2GT (also referred to as GT2) closed rubber timing belt. Commonly used on small CNC...
In Stock
GT2 belt 117 tooth 234mm
6001-401
6mm Wide GT2 / 2GT 2mm Pitch Rounded Tooth Profile 234mm Closed Belt
£1.43 (£1.72 UK, incl VAT)
6001-401
A 2mm pitch, 117 tooth (234mm long), 6mm wide fibreglass reinforced 2GT (also referred to as GT2) closed rubber timing belt. Commonly used on small CNC...
In Stock
3mm shaft hub
6004-102
Makertronics 3mm Shaft Mounting Hub
£1.75 (£2.10 UK, incl VAT)
6004-102
From our Makertronics branded range of products at Everyday Low Prices. 3mm flanged shaft mounting hub in steel BZP including hex key and grub screws....
In Stock

Minimum quantity for "Makertronics 3mm Shaft Mounting Hub" is 2.