No data found

Close

Categories

10mm Wide GT2 / 2GT 2mm Pitch Rounded Tooth Profile 230mm Closed Belt

£2.01
(£2.41 UK, incl VAT)
6002-341
5 g
In Stock
+ −
Add to wish list

A 2mm pitch, 115 tooth (230mm long), 10mm wide fibreglass reinforced 2GT (also referred to as GT2) closed rubber timing belt. Commonly used on small CNC machines such as 3D printers. Tooth profile is the standard circular form and is ideal for use with our range of matching GT2 pulleys for 10mm belts. We also have a range of GT2 belts that are 6mm wide.

Customers also bought....

Pulley Belt 2.5mm x 20mm Internal Diameter
4602-210
Pulley Belt 2.6mm x 20.3mm Internal Diameter
£0.57 (£0.68 UK, incl VAT)
4602-210
A 2.6mm diameter 'O' ring with an internal diameter of 20.3mm. Made from Nitrile (NBR N70) rubber which is ideal for use as a drive belt on our wooden,...
In Stock
Miniature Model Bearing 6900ZZ 10x22x6
4255-084
Miniature Model Bearing 6900ZZ 10x22x6
£0.88 (£1.06 UK, incl VAT)
4255-084
Ball Bearing: Bore 10mm Outer Diameter 22mm Width 6mm
In Stock
Miniature Model Bearing MR126ZZ 6x12x4
4255-134
Miniature Model Bearing MR126ZZ 6x12x4
£0.69 (£0.83 UK, incl VAT)
4255-134
Ball Bearing: Bore 6mm Outer Diameter 12mm Width 4mm Load rating 716N
In Stock
Miniature Flange Bearing MF105ZZ 5X10X4
4255-166
Miniature Flange Bearing MF105ZZ 5X10X4
£1.26 (£1.51 UK, incl VAT)
4255-166
Ball Bearing: Bore 5mm Outer Diameter 10mm Flange Outer Diameter 11.6mm Width 4mm Load rating 431N
In Stock
MOD 0.5 Double Gear 30/10T 2.9mm Bore
4600-071
MOD 0.5 Double Gear 30/10T 2.9mm Bore
£0.20 (£0.24 UK, incl VAT)
4600-071
A double gear with 30/10 teeth. OD 16/6mm, width 2.5/4mm, overall width 6.5mm. Intended as an interference fit on a 3mm shaft.
In Stock

Minimum quantity for "MOD 0.5 Double Gear 30/10T 2.9mm Bore" is 5.