Bernard Elgar (Invicta) Member Username: Invicta
Post Number: 1 Registered: 10-2006
|
Posted on Monday, October 2, 2006 - 9:59 am: |
|
I am getting to the stage of building the chassis, suspension and related components. Do you have a 13cm diameter wheel which I could adapt and attach to suitably sized axles please? I would also be interested to learn what RC components you would recommend for the drive, stearing and control.(Model is approx 22" Long x 10" wide) Kind regards, bernard |
Admin (Admin) Board Administrator Username: Admin
Post Number: 273 Registered: 10-2004
|
Posted on Monday, October 2, 2006 - 9:12 pm: |
|
Bernard, The wheels could be a problem for us, we do have a 12.5cm wheel which could be adapted but whether it would like 'right' on the jeep I couldn't possibly say. See our part 4260-012. As for the control, we are very likely to have all the parts you could need. Is it electric motor driven? If so what power and voltage is the motor? For the steering, are you looking for a servo control? I'm sure we can help with this. |