Testimonials Testimonials

Tamiya 70101 Truck Tyre Set

£6.01
(£7.21 UK, incl VAT)
Price in points: 1202 points
4610-001
75 g
4 item(s)
End of line
+
Add to wish list

Tamiya 70101 truck tyre set. This set contains four 36mm-diameter wheels with hard, rubber, 15mm-wide treads. Our small round robot chassis is designed to use a pair of these wheels, which are great for making small robots!

Tamiya - We have four different types of wheels from Tamiya's educational construction series, each of which can be connected directly to the 3mm hexagonal axles found in many of the Tamiya Gearboxes. The sports tyres and the narrow tyres are the only wheels compatible with the 4mm round shafts of the Tamiya high efficiency gearbox series. All of the wheels have plastic hubs and high-traction rubber tires; they differ mainly in size and springiness.

No posts found

Write a review

Hello, I am currently doing a project where space is very limited. How far does the end of the axle connector sticks out and how deep the bore go? For example, could you file down the end and still have enough of the bore left to fit the axle securely. Thank you, All the best, Sarah

Asked by Sarah | 05/06/2019, 17:03 | 2 answer(s)

Customers also bought....

4603-032
£0.70 (£0.84 UK, incl VAT)
4603-032
A 38mm diameter wheel that is a tight (interference) fit on a 3mm shaft. Part number 4603-033 can be used as a tyre on this wheel but we would recommend a...
In stock

4600-072
£0.17 (£0.20 UK, incl VAT)
4600-072
A double gear with 30/10 teeth. OD 16/6mm, width 2.5/4mm, overall width 6.5mm. Intended as a slip fit on a 3mm shaft.
In stock

4600-074
£0.20 (£0.24 UK, incl VAT)
4600-074
A double gear with 50/10 teeth. OD 26/6mm, width 2.5/4mm, overall width 6.5mm. Intended as a slip fit on a 3mm shaft.
In stock

4610-006
£5.75 (£6.90 UK, incl VAT)
4610-006
The Tamiya slick tyre set contains four wheels with arched tyres, each with a diameter of 31 mm (1.2") and a width of 10 mm (0.4"). These wheels...
5 item(s)
End of line

4600-070
£0.16 (£0.19 UK, incl VAT)
4600-070
Notes: Pinion gears sold individually but also available in packs of 10 upwards. A 10T pinion gear for an interference fit on a 2mm motor shaft. Nominal...
In stock