Free UK Economy Shipping option for orders over £35+VAT (<1.8kg)          

Testimonials Testimonials

Pololu 180:1 Mini Plastic Gearmotor Offset 3mm D-Shaft

£6.20
(£7.44 UK, incl VAT)
Price in points: 1240 points
1451-033
20 g
Currently Unavailable
Discontinued Product

Overview

This brushed DC gearmotor is very compact and weighs only 19.5 grams — perfect for building a quick, miniature robot. The recommended operating voltage range for this motor is 3 to 6 V, though the gearmotor can start rotating at voltages as low as 0.6 V. At 4.5 V, the motor has a free-run current of 80 mA and a stall current of 800 mA; this relatively low current draw makes this a great match for our qik 2s9v1 dual serial motor controller and programmable Orangutan robot controllers. The stall current, torque, and rotation speed will approximately scale linearly with the motor voltage. The gearbox is protected by a built-in safety clutch that will typically slip before gear teeth can shear.

This gearmotor features a 3 mm D-shaped output shaft that matches those on many of our micro metal gearmotors and works with the Pololu wheels and 3mm universal aluminum mounting hub.

Gearmotor Versions

This gearmotor is available with two different output shaft orientations—offset from but parallel to the motor shaft or perpendicular to the motor shaft—and in two gear ratios—120:1 (for higher speed) or 180:1 (for higher torque).

Downloads

No posts found

Write a review

No FAQ found

1451-114
£4.04 (£4.85 UK, incl VAT)
1451-114
These plastic mounting brackets are specifically designed to work with our Pololu mini plastic gearmotors. Both the offset and 90-degree configurations of...
5 item(s)
End of line

1451-115
£4.04 (£4.85 UK, incl VAT)
1451-115
These plastic mounting brackets are specifically designed to work with our mini plastic gearmotors. Both the offset and 90-degree configurations of the mini...
2 item(s)
End of line

Customers also bought....

1451-032
£5.98 (£7.18 UK, incl VAT)
1451-032
Overview This brushed DC gearmotor is very compact and weighs only 19.5 grams — perfect for building a quick, miniature robot. The...
Currently Unavailable
Discontinued Product

4611-040
£4.63 (£5.56 UK, incl VAT)
4611-040
These black plastic wheels press fit onto the 3mm D shafts of our mini and micro metal gearmotors to make a nice drive solution for small robots. The...
13 item(s)
End of line

1451-101
£1.24 £0.66 (£0.79 UK, incl VAT)
1451-101
The provided mounting holes in the GM2/GM8 gear motors are a convenient way to mount these to your project but sometimes you just need a different way to...
12 item(s)
End of line

1261-004
£3.01 (£3.61 UK, incl VAT)
1261-004
New version now with mounting holes. This 3.2″ × 2.1″ solderless breadboard has four bus lines spanning the length of the board and 30 rows of pins,...
7 item(s)
End of line

1400-052
£4.88 (£5.86 UK, incl VAT)
1400-052
New lower price - was £5.03 A multi-ratio gearbox supplied in kit form which allows eight different transmissions from 5:1 to 1125:1. * Included in...
Currently out of stock