These light-weight aluminum extended shaft adapters convert a typical motor output shaft into a 12 mm hex shaft that is compatible with many common hobby RC wheels. The side of each adapter that mounts to the wheel contains a hole tapped for M4 screws, and the other side of the adapter mounts to a motor shaft with two M3 set screws. This set includes a pair of adapters for 6mm motor shafts, two 8 mm M4 screws, four M3 set screws, and one 1.5 mm Allen wrench for use with the set screws.
Also available for 3mm and 4mm motor shafts. We also stock a similar adaptor as a standard length of 20mm for 6mm shafts.
No posts found
No FAQ found