These light-weight aluminum shaft adapters convert a typical motor output shaft into a 12 mm hex shaft that is compatible with many common hobby RC wheels. The side of each adapter that mounts to the wheel contains a hole tapped for M4 screws, and the other side of the adapter mounts to a motor shaft with two M3 set screws. This set includes a pair of adapters for 3mm motor shafts, two 8 mm M4 screws, four M3 set screws, and one 1.5 mm Allen wrench for use with the set screws.
Also available for 4m and 6mm motor shafts.
No posts found
No FAQ found