Selected product filters Selected product filters

Opto Breakout Boards

Opto Breakout Boards
$5.46 $4.36 ($5.23 incl VAT)
2900-465
This is a breakout board for the WS2801 RGB LED controller, the same IC used in our addressable RGB LED strips. The board comes with the chip on one side...
4 item(s)
End of line
+

$5.46 $4.36 ($5.23 incl VAT)
2900-407
This board from Sparkfun BOB-09118 is designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a...
3 item(s)
End of line
+

$10.90 $8.73 ($10.48 incl VAT)
2900-434
Description: This is a very small infrared receiver based on the TSOP85 receiver from Vishay. This receiver has all the filtering and 38kHz demodulation...
4 item(s)
End of line
+

$5.46 $4.36 ($5.23 incl VAT)
2900-458
Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don't. Sensor acts like a transistor - the greater the incoming...
6 item(s)
End of line
+

$10.90 $8.73 ($10.48 incl VAT)
2900-472
In physical computing it's sometimes nice to know how physically close you are to an object. In other words, you may need to know your 'proximity' to an...
2 item(s)
End of line
+

$3.63 $2.91 ($3.49 incl VAT)
2900-473
This is a breakout board for the built in WS2812 RGB LED. The WS2812 is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins...
18 item(s)
End of line
+

$14.54 $10.66 ($12.79 incl VAT)
2900-632
The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal...
2 item(s)
End of line
+

$9.09 $7.27 ($8.71 incl VAT)
2900-634
If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements,...
2 item(s)
End of line
+

$12.50 ($15.00 incl VAT)
2900-907
Resistive touch screens are incredibly popular as overlays to TFT and LCD displays. Only problem is they require a bunch of analog pins and you have to...
2 item(s)
End of line
+