Testimonials Testimonials

Model Motor Size B

(£1.20 incl VAT)
Price in points: 200 points
In stock
Voltage Range: 1.5V to 4.5V
Rated Voltage: 3V
No Load Current: 0.13A
Rated Load Current: 0.45A
Rated Load Speed: 5,250 RPM
Torque: 10.5 g/cm
Rated Output Power:  0.56W
Body Diameter: 24mm
Body Length: 27mm
Spindle Length: 8.6mm
Spindle Diameter: 2mm


No posts found

Write a review

The datasheet shows this motor as rotating clockwise viewed from the shaft end: is this definitive, or is the motor reversible?

Asked by John | 15/01/2016, 10:22 | 1 answer(s)

Are those two holes which are visible on the front of the motor threaded and if so what diameter?

Asked by Mark | 20/04/2015, 12:57 | 1 answer(s)

Is there any product you sell which can control this motor with a timer. For example, you could set the timer to 7:30 AM and the motor would start rotating?

Asked by John | 26/03/2015, 20:16 | 1 answer(s)

Do you have a motor that i could use in a mini grinder?

Asked by Phill | 15/07/2014, 13:56 | 1 answer(s)

Customers also bought....

£0.51 (£0.61 incl VAT)
Specifications Voltage Range: 1.5V to 4.5V Rated Voltage: 3V Rated Power: 1.29W No Load...
In stock

£0.78 (£0.94 incl VAT)
Specifications Voltage Range: 1.5V to 4.5V Nominal voltage: 3V Nominal no Load Current: 0.35A Nominal full Load Current:...
In stock

£0.72 (£0.86 incl VAT)
Also known as a MM28   Specifications Voltage Range: 1.5V to 6V Rated Voltage: 3V Rated Power: 1.58W No Load Current:...
In stock

£0.88 (£1.06 incl VAT)
3-Blade 125mm diameter propeller for a tight fit onto a 2mm motor shaft.
In stock

£0.31 (£0.37 incl VAT)
A self-adhesive motor mount for small dc motors, ideal for our 1400-020, 1400-021 or similar motors with a diameter of 21 to 26mm (with flat sided plastic...
In stock