Author |
Message |
David McLachlan (Dmac) Member Username: Dmac
Post Number: 1 Registered: 10-2006
|
Posted on Monday, October 23, 2006 - 8:46 pm: |
|
Can the dual 50 volt speed controller software be upgraded to give failsafe like the current units. Regards Dave. |
Admin (Admin) Board Administrator Username: Admin
Post Number: 295 Registered: 10-2004
|
Posted on Tuesday, October 24, 2006 - 7:28 pm: |
|
Hello Dave, Yes, it is technically possible but Technobots do not have the authorisation to do it. We upgraded our stock to the latest version recently by sending them back to the manufacturers. I would suggest that you contact them direct to see if they offer the service to end customers. Tell them you purchased it from Technobots but note there is likely to be a handling charge. Send an Email to sales(at)robot-electronics.co.uk obviously replacing the (at) with @ In the unlikely event you get any problems, let us know. Regards |
David McLachlan (Dmac) Member Username: Dmac
Post Number: 2 Registered: 10-2006
|
Posted on Wednesday, November 8, 2006 - 8:31 pm: |
|
Hi I emailed Sales @ electronics.co.uk, and they have not replied. Regards Dave. |
Admin (Admin) Board Administrator Username: Admin
Post Number: 316 Registered: 10-2004
|
Posted on Wednesday, November 8, 2006 - 9:46 pm: |
|
Hi Dave, Do you mean at robot-electronics or was that just a typo in your post? Paul |
David McLachlan (Dmac) Member Username: Dmac
Post Number: 3 Registered: 10-2006
|
Posted on Thursday, November 9, 2006 - 7:08 pm: |
|
Sorry, typo in post. Dave. |
Admin (Admin) Board Administrator Username: Admin
Post Number: 318 Registered: 10-2004
|
Posted on Monday, November 13, 2006 - 9:35 pm: |
|
Hi Dave, Probably best if you forward the email to us and we will pass it on. Send it to sales at technobots.co.uk Paul |