MakerBeamXL

MakerBeamXL is an aluminum profile with a diameter of 15mm x 15mm and available in different lengths. MakerBeamXL has a smooth surface and 5 hollow cores. The middle hollow core is tapped M3 which allows use of corner cubes in place of angle brackets.

We also stock the original MakerBeam which has a 10mm x 10mm profile as well as OpenBeam which also has a 15 x 15mm profile of a different pattern and hollow core (requires manual tapping for use with corner cubes).

0.66 incl VAT (0.55 exc. tax)
4447-080
A single length of black anodised MakerBeamXL which has a 15mm x 15mm square profile. The core is tapped M3 at each end making them suitable for use with... read more
In stock
+

0.79 incl VAT (0.66 exc. tax)
4447-070
MakerBeam XL T brackets are made of stainless steel. These brackets are best suited for profiles with a 15x15mm diameter (e.g. OpenBeam). Sold... read more
In stock
+

0.79 incl VAT (0.66 exc. tax)
4447-071
MakerBeam XL right angle brackets are made of stainless steel. These brackets are best suited for profiles with a 15x15mm diameter (e.g. OpenBeam).... read more
In stock
+

1.30 incl VAT (1.09 exc. tax)
4447-081
A single length of black anodised MakerBeamXL which has a 15mm x 15mm square profile. The core is tapped M3 at each end making them suitable for use with... read more
In stock
+

1.83 incl VAT (1.53 exc. tax)
4447-082
A single length of black anodised MakerBeamXL which has a 15mm x 15mm square profile. The core is tapped M3 at each end making them suitable for use with... read more
In stock
+

2.44 incl VAT (2.03 exc. tax)
4447-083
A single length of black anodised MakerBeamXL which has a 15mm x 15mm square profile. The core is tapped M3 at each end making them suitable for use with... read more
In stock
+

3.42 incl VAT (2.85 exc. tax)
4447-084
A single length of black anodised MakerBeamXL which has a 15mm x 15mm square profile. The core is tapped M3 at each end making them suitable for use with... read more
In stock
+

6.64 incl VAT (5.53 exc. tax)
4447-085
A single length of black anodised MakerBeamXL which has a 15mm x 15mm square profile. The core is tapped M3 at each end making them suitable for use with... read more
In stock
+

9.53 incl VAT (7.95 exc. tax)
4447-086
A single length of black anodised MakerBeamXL which has a 15mm x 15mm square profile. The core is tapped M3 at each end making them suitable for use with... read more
In stock
+

10.41 incl VAT (8.67 exc. tax)
4447-087
A single length of black anodised MakerBeamXL which has a 15mm x 15mm square profile. The core is tapped M3 at each end making them suitable for use with... read more
In stock
+

10.46 incl VAT (8.71 exc. tax)
4447-072
1 bag T-slot nuts contains 50 T-slot nuts for MakerBeamXL. The MakerBeamXL T-slot nut is made of stainless steel and was specially designed to slide into... read more
In stock
+

22.59 incl VAT (18.83 exc. tax)
4447-073
1 piece of 300mm linear slide rail (300mm x 9mm x 6,5mm) and carriage (29mm x 20mm x 8mm). The linear slide can be combined with both MakerBeam and... read more
In stock
+

131.35 incl VAT (109.46 exc. tax)
4447-098
Save around 15% and buy a starter kit. This kit is packed in a simple plastic case. You buy 40 beams anodised in black (8x 50mm, 8x 100mm, 8x 150mm, 8x... read more
In stock
+