Testimonials Testimonials

Kitronik PIC 8-Pin Project Board (2in 3out) Comp Kit

(£1.56 incl VAT) You save: £0.65 (33%)
Price in points: 260 points
14 item(s)
End of line

The development and project boards have been designed to complement each other. The larger development board (once built) can be used as a starting point for a project by attaching inputs and outputs to the board via the terminal blocks. The PIC software can then be developed and the complete solution tested without using a soldering iron. Once happy with the design, transfer the design to the project board, where the chosen peripherals can also be soldered into the board. The development board can be reused on future projects. You can connect any device to the outputs of the board including LEDs, sounders, motors etc.  Both boards are supplied in kit form.

Requires x3 AA batteries, not included.

You will also need either the PICAXE or GENIE programming software and lead.

 Processor not included. We stock the PICAXE range of PIC's and recommend the 08M2 (which supersedes the 08M).

Feature Development Board Project Board
Compatible with any 8 pin microcontroller. The stereo jack is compatible with PICAXE® chips & most educational software. Yes Yes
Two inputs, complete with pull down resistors, ready for switches to be connected directly to the board. Yes Yes
Test button switches on the two inputs for ease of software testing. Yes No
Outputs 1 & 2 directly driven by the PIC, max current 25mA. Yes Yes
Output 3 transistor driven, max current 800mA. Yes Yes
Debug LEDs, allowing ease of software testing. These are low current LEDs and only consume 2mA, leaving plenty of current for the peripheral. Yes No
Terminal blocks for easy connection of devices. Yes No
8 pin PIC project board

A board for students to make their PIC project. Processor not included.

This kit includes:

  • 3 x 1Kohm resistors
  • 1 x 10Kohm resistors
  • 1 x 22Kohm resistor
  • 1 x BC337 NPN transistor
  • 2 x PCB mount switches
  • 1 x 3.5mm PCB mount jack socket
  • 1 x 8 pin IC holder
  • 1 x PP3 clip lead
  • 1 x 3AA battery holder
  • 1 x PIC project board PCB

PCB dimensions: 48mm x 48mm.

Manufacturer's Details

Manufacturer's SKU :

No posts found

Write a review

No FAQ found

Customers also bought....

£0.47 (£0.56 incl VAT)
MOD 1 plastic rack 50mm long x 6mm x 6mm.
45 item(s)
End of line

£0.11 (£0.13 incl VAT)
5mm LED Red High Efficency 45mcd.   Specification Colour Wavelength (nm) Lum. Int. (mcd) @ IF 10mA IF max (mA)...
In stock

£0.43 (£0.52 incl VAT)
Non-latching push button action Rated 250mA 125V AC Panel hole diameter 7mm Overall dimensions 28mm long, 10.5mm diameter
In stock

£2.94 (£3.53 incl VAT)
A lost cost geared motor with a reduction of 120:1. Works on 3-9V, output speed is approxiamtely 100 rpm at 6V.  No load current 100mA, Torque at 6V...
In stock

£4.23 (£5.08 incl VAT)
New lower price - was £5.03 A multi-ratio gearbox supplied in kit form which allows eight different transmissions from 5:1 to 1125:1. * Included in...
6 item(s)
End of line