Search resultsProducts found: 82

4.71 4.52 incl VAT (3.77 exc. tax)
4555-751
3 item(s)
End of line
+
Add to wish list

4.71 4.52 incl VAT (3.77 exc. tax)
4555-752
Rubber 'O' ring assortment pack. Includes most common sizes. Suitable for plumbing, car repair etc. Supplied in clear plastic organiser case. 3x6 - 20x27mm... read more
1 item(s)
End of line
+
Add to wish list

0.27 0.25 incl VAT (0.21 exc. tax)
4603-144
2 item(s)
End of line
+
Add to wish list

1.37 0.98 incl VAT (0.82 exc. tax)
4302-412
A pack of 50 M4 x 12mm flange head screws that have a large diameter low profile head for use with pozi or flat blade drivers. read more
12 item(s)
End of line
+
Add to wish list

2.29 2.06 incl VAT (1.72 exc. tax)
4300-243
A chemical blackened pozi drive pan head screw M4 x 16mm. Ideal for applications that do not look good with bright zinc plated screws such as black front... read more
13 item(s)
End of line
+
Add to wish list

6.48 5.84 incl VAT (4.87 exc. tax)
4300-263
A chemical blackened pozi drive pan head screw M6 x 16mm. Ideal for applications that do not look good with bright zinc plated screws such as black front... read more
2 item(s)
End of line
+
Add to wish list

4.60 4.13 incl VAT (3.45 exc. tax)
4307-070
Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. Pack of 10 read more
2 item(s)
End of line
+
Add to wish list

1.71 1.64 incl VAT (1.36 exc. tax)
4473-001
Brass Square Tube 1.59 x 305mm read more
3 item(s)
End of line
+
Add to wish list

0.55 0.44 incl VAT (0.37 exc. tax)
4355-001
Lynch Pin 4.5mm x 40mm read more
22 item(s)
End of line
+
Add to wish list

1.10 incl VAT (0.92 exc. tax)
4602-050
From the same range but too small for a brass hub. Use with a 4mm or 2mm diameter shaft. 10mm Diameter. Ideally use with 2.5mm round rubber belts. read more
Out of stock
+
Add to wish list

0.25 0.15 incl VAT (0.13 exc. tax)
4354-002
Split Pin 1" x 5/64" BZP Pk/10 read more
3 item(s)
End of line
+
Add to wish list

1.04 0.92 incl VAT (0.77 exc. tax)
4611-020
These new hard plastic wheels are specially designed for our GM2, GM3, GM8, GM9 & GM17 gear motor output shafts. Although usable as wheels, we often use... read more
5 item(s)
End of line
+
Add to wish list

1.50 1.63 incl VAT (1.35 exc. tax)
4473-002
Brass Square Tube 2.38 x 305mm read more
8 item(s)
End of line
+
Add to wish list

12.23 12.94 incl VAT (10.79 exc. tax)
4251-002
UCFL202 Flanged Bearing Unit 2 Bolt Cast 15mm read more
8 item(s)
End of line
+
Add to wish list

0.46 0.44 incl VAT (0.37 exc. tax)
4602-110
Overall size 26 x 19mm, Interference fit on 4mm diameter shaft, hole centres 9.5mm apart, 6mm thick. read more
7 item(s)
End of line
+
Add to wish list

0.64 0.50 incl VAT (0.42 exc. tax)
4355-003
Lynch Pin 8mm x 45mm read more
24 item(s)
End of line
+
Add to wish list

0.27 0.16 incl VAT (0.14 exc. tax)
4354-003
Split Pin 1.5" x 3/32" BZP Pk/10 read more
16 item(s)
End of line
+
Add to wish list

9.40 9.96 incl VAT (8.30 exc. tax)
4253-014
UCP206 read more
2 item(s)
End of line
+
Add to wish list

8.72 9.23 incl VAT (7.69 exc. tax)
4253-015
UCP203 Pillow Block Cast Bearing Unit 17mm read more
3 item(s)
End of line
+
Add to wish list

0.34 0.33 incl VAT (0.27 exc. tax)
4350-007
Clevis Pin 7.82 x 19.5mm read more
37 item(s)
End of line
+
Add to wish list

0.72 0.57 incl VAT (0.48 exc. tax)
4355-004
Lynch Pin 10mm x 45mm read more
21 item(s)
End of line
+
Add to wish list

7.89 8.36 incl VAT (6.96 exc. tax)
4251-004
UCFL205 read more
6 item(s)
End of line
+
Add to wish list

0.32 0.21 incl VAT (0.17 exc. tax)
4611-022
The PRet plastic retainer is a plastic hub designed to press-fit onto a 1.5mm shaft. It can also be useed as a hub for making micro wheels out of, use... read more
13 item(s)
End of line
+
Add to wish list

0.55 0.53 incl VAT (0.44 exc. tax)
4351-013
R Pin 5 x 25 x 104mm read more
9 item(s)
End of line
+
Add to wish list

0.34 0.21 incl VAT (0.17 exc. tax)
4354-004
Split Pin 1.5" x 7/64" BZP Pk/10 read more
16 item(s)
End of line
+
Add to wish list

0.81 0.78 incl VAT (0.65 exc. tax)
4351-014
R Pin 6 x 29 x 119mm read more
102 item(s)
End of line
+
Add to wish list

2.61 2.35 incl VAT (1.96 exc. tax)
4300-072
Pan Head M2.5 x 16 Pk of 100 Sold in bags of 100 read more
3 item(s)
End of line
+
Add to wish list

9.38 9.94 incl VAT (8.28 exc. tax)
4251-005
UCFL206 read more
7 item(s)
End of line
+
Add to wish list

0.48 0.29 incl VAT (0.24 exc. tax)
4354-005
Split Pin 1.5" x 1/8" BZP Pk/10 read more
14 item(s)
End of line
+
Add to wish list

3.64 2.91 incl VAT (2.43 exc. tax)
4611-004
Looking for a quick and easy way to attach a wheel to a servo for a wheeled robot? Here's the answer! This custom-molded black wheel is designed to fit to... read more
17 item(s)
End of line
+
Add to wish list

7.92 8.39 incl VAT (7.00 exc. tax)
4251-006
UCFL203 Flanged Bearing Unit 2 Bolt Cast 17mm read more
3 item(s)
End of line
+
Add to wish list

1.13 0.90 incl VAT (0.76 exc. tax)
4355-006
Lynch Pin 11mm x 50mm read more
2 item(s)
End of line
+
Add to wish list

0.34 0.21 incl VAT (0.17 exc. tax)
4354-006
Split Pin 1.5" x 9/64" BZP Pk/5 read more
29 item(s)
End of line
+
Add to wish list

0.37 0.22 incl VAT (0.18 exc. tax)
4354-007
Split Pin 1.5/8" x 5/32" BZP Pk/5 read more
28 item(s)
End of line
+
Add to wish list

8.76 9.27 incl VAT (7.73 exc. tax)
4251-011
UCF202 Flanged Bearing Unit 4 Bolt Cast 15mm read more
2 item(s)
End of line
+
Add to wish list

6.70 7.09 incl VAT (5.91 exc. tax)
4604-123
This double sided Aluminium bearing house accepts any of our bearings with an overall diameter (OD) of 22mm such as these: 6mm bore 8mm bore 10mm... read more
5 item(s)
End of line
+
Add to wish list

0.74 0.68 incl VAT (0.56 exc. tax)
4300-106
Pan Head M5 x 6 per 25 read more
5 item(s)
End of line
+
Add to wish list

0.82 0.74 incl VAT (0.62 exc. tax)
4300-107
Pan Head M5 x 10 per 25 read more
6 item(s)
End of line
+
Add to wish list

3.41 3.08 incl VAT (2.56 exc. tax)
4300-013
Sold in packs of 50 screws read more
8 item(s)
End of line
+
Add to wish list

0.71 0.63 incl VAT (0.53 exc. tax)
4300-108
Pan Head M5 x 16 per 25 read more
37 item(s)
End of line
+
Add to wish list

3.64 3.29 incl VAT (2.74 exc. tax)
4300-015
Pan Head M5 x 20 per 100 Sold in multiples of: 100g For info, approx quantity of fixings / 100g: 26 read more
3 item(s)
End of line
+
Add to wish list

0.48 0.42 incl VAT (0.35 exc. tax)
4300-109
Pan Head M5 x 25 per 10 read more
13 item(s)
End of line
+
Add to wish list

1.47 1.32 incl VAT (1.10 exc. tax)
4300-019
Sold in packs of 10 screws read more
5 item(s)
End of line
+
Add to wish list

9.15 9.69 incl VAT (8.07 exc. tax)
4251-015
UCF203 Flanged Bearing Unit 4 Bolt Cast 17mm read more
1 item(s)
End of line
+
Add to wish list

1.68 1.51 incl VAT (1.26 exc. tax)
4300-023
Pan Head M6 x 20 pk 25 Sold in multiples of 25 read more
12 item(s)
End of line
+
Add to wish list

0.80 0.71 incl VAT (0.60 exc. tax)
4300-025
Sold in packs of 10 screws read more
30 item(s)
End of line
+
Add to wish list

1.02 0.92 incl VAT (0.77 exc. tax)
4300-027
Sold in packs of 10 screws read more
29 item(s)
End of line
+
Add to wish list

0.35 0.32 incl VAT (0.26 exc. tax)
4300-029
Sold in packs of 10 screws read more
28 item(s)
End of line
+
Add to wish list

0.92 0.82 incl VAT (0.69 exc. tax)
4307-014
There are your standard Philips-head 4-40 screws. They are 1/4" long and come in packs of ten. This is the screw size Sparkfun use in most of the holes... read more
2 item(s)
End of line
+
Add to wish list

3.57 2.70 incl VAT (2.26 exc. tax)
4262-002
Type 3025 with 2 fixing holes and a 25mm steel ball. Maximum loading up 55kg, down 25kg Max diameter 56mm Working height of ball 14.6mm Under flange to... read more
3 item(s)
End of line
+
Add to wish list

1.73 1.65 incl VAT (1.37 exc. tax)
4307-017
Standard Philips-head 4-40 screws. They are 1/2" long and come in packs of ten. This is the screw size that Sparkfun use in most of the holes for their... read more
14 item(s)
End of line
+
Add to wish list

1.00 0.80 incl VAT (0.66 exc. tax)
4255-092
Ball Bearing: Bore 12mm Outer Diameter 28mm Width 8mm read more
83 item(s)
End of line
+
Add to wish list

3.56 3.85 incl VAT (3.21 exc. tax)
4471-018
Brass Tube 14.3 OD, 13.64 ID x 305mm Long. Fits inside 4471-019, see related products below. read more
1 item(s)
End of line
+
Add to wish list

4.02 4.34 incl VAT (3.62 exc. tax)
4471-020
Brass Tube 15.9 OD, 15.23 ID x 305mm Long. Fits inside 4471-021, see related products below. read more
2 item(s)
End of line
+
Add to wish list

0.98 0.74 incl VAT (0.62 exc. tax)
4255-205
Ball Bearing: Bore 15mm Outer Diameter 24mm Width 5mm Load rating 2,073N read more
25 item(s)
End of line
+
Add to wish list

1.06 0.80 incl VAT (0.66 exc. tax)
4255-206
Ball Bearing: Bore 15mm Outer Diameter 28mm Width 7mm Load rating 4,321N read more
96 item(s)
End of line
+
Add to wish list

1.04 0.61 incl VAT (0.50 exc. tax)
4255-210
Ball Bearing: Bore 17mm Outer Diameter 35mm Width 10mm Load rating 6,000N read more
170 item(s)
End of line
+
Add to wish list

1.84 1.65 incl VAT (1.37 exc. tax)
4307-054
These are standard 4-40 zinc-plated nuts. Note: These come in packs of 10 read more
7 item(s)
End of line
+
Add to wish list

1.76 1.58 incl VAT (1.32 exc. tax)
4307-056
These are standard locknuts with 4-40 thread. For use with 4-40 machine screws. They have a nylon insert that allows them to stay tightly in place.... read more
2 item(s)
End of line
+
Add to wish list

3.02 2.90 incl VAT (2.42 exc. tax)
4604-068
Inserts for the coupling body 4604-050, note these inserts are sold individually allowing you to mix and match to suit your application. We have also... read more
2 item(s)
End of line
+
Add to wish list

2.05 2.18 incl VAT (1.81 exc. tax)
4609-094
Standard Collar 35x56x16mm BZP. For dimensions and product description, click button below. We source our special order products from the largest... read more
4 item(s)
End of line
+
Add to wish list

8.12 8.60 incl VAT (7.17 exc. tax)
4609-097
Standard Collar 50x80x18mm BZP. For dimensions and product description, click button below. We source our special order products from the largest... read more
2 item(s)
End of line
+
Add to wish list

1.45 1.04 incl VAT (0.87 exc. tax)
4300-141
CSK Head M5 x 16 per 100g Sold in multiples of: 100g For info, approx quantity of fixings / 100g: 43 read more
3 item(s)
End of line
+
Add to wish list

1.20 0.87 incl VAT (0.72 exc. tax)
4300-142
CSK Head M5 x 20 per 100g Sold in multiples of: 100g For info, approx quantity of fixings / 100g: 34 read more
8 item(s)
End of line
+
Add to wish list

0.56 0.50 incl VAT (0.42 exc. tax)
4300-041
Sold in packs of 10 screws read more
5 item(s)
End of line
+
Add to wish list

0.60 0.54 incl VAT (0.45 exc. tax)
4300-042
Sold in packs of 10 screws read more
37 item(s)
End of line
+
Add to wish list

5.17 4.96 incl VAT (4.13 exc. tax)
4307-072
Metal long standoffs: 1" long x 1/4" OD. Used to get your proto board up off the table. #4-40 thread. Fits most development boards with available holes.... read more
1 item(s)
End of line
+
Add to wish list

10.99 11.63 incl VAT (9.70 exc. tax)
4609-099
Standard Collar 60x90x20mm BZP. For dimensions and product description, click button below. We source our special order products from the largest... read more
2 item(s)
End of line
+
Add to wish list

0.79 0.70 incl VAT (0.58 exc. tax)
4300-045
Sold in packs of 10 screws read more
12 item(s)
End of line
+
Add to wish list

0.90 0.81 incl VAT (0.68 exc. tax)
4300-046
Sold in packs of 10 screws read more
21 item(s)
End of line
+
Add to wish list

1.44 1.09 incl VAT (0.90 exc. tax)
4255-286
9mm bore x 20mm overall diameter x 7mm thick, 3,356N rating, 4,500 rpm max, uses 8 off 3.175mm diameter steel balls. read more
155 item(s)
End of line
+
Add to wish list

0.90 0.94 incl VAT (0.78 exc. tax)
4477-001
Brass Strip 0.4 x 6.35 x 305mm read more
8 item(s)
End of line
+
Add to wish list

1.12 1.17 incl VAT (0.97 exc. tax)
4477-002
Brass Strip 0.4 x 12.7 x 305mm read more
15 item(s)
End of line
+
Add to wish list

1.50 1.57 incl VAT (1.31 exc. tax)
4477-003
Brass Strip 0.4 x 19 x 305mm read more
8 item(s)
End of line
+
Add to wish list

1.93 2.02 incl VAT (1.68 exc. tax)
4477-004
Brass Strip 0.4 x 25.4 x 305mm read more
14 item(s)
End of line
+
Add to wish list

2.02 2.11 incl VAT (1.75 exc. tax)
4477-005
Brass Strip 0.4 x 51 x 305mm read more
3 item(s)
End of line
+
Add to wish list

1.12 1.17 incl VAT (0.97 exc. tax)
4477-006
Brass Strip 0.6 x 6.35 x 305mm read more
3 item(s)
End of line
+
Add to wish list

1.12 1.17 incl VAT (0.97 exc. tax)
4477-007
Brass Strip 0.6 x 12.7 x 305mm read more
12 item(s)
End of line
+
Add to wish list

1.67 1.60 incl VAT (1.34 exc. tax)
4477-008
Brass Strip 0.6 x 19 x 305mm read more
6 item(s)
End of line
+
Add to wish list

1.65 1.72 incl VAT (1.43 exc. tax)
4477-009
Brass Strip 0.6 x 25.4 x 305mm read more
6 item(s)
End of line
+
Add to wish list

1.12 1.17 incl VAT (0.97 exc. tax)
4477-011
Brass Strip 0.8 x 6.35 x 305mm read more
6 item(s)
End of line
+
Add to wish list

4.51 4.68 incl VAT (3.90 exc. tax)
4477-019
Brass Strip 1.6 x 25.4 x 305mm read more
1 item(s)
End of line
+
Add to wish list