Search resultsProducts found: 80

£2.00 £1.50 (£1.80 incl VAT)
4300-243
A chemical blackened pozi drive pan head screw M4 x 16mm. Ideal for applications that do not look good with bright zinc plated screws such as black front...
11 item(s)
End of line
+

£5.66 £4.25 (£5.10 incl VAT)
4300-263
A chemical blackened pozi drive pan head screw M6 x 16mm. Ideal for applications that do not look good with bright zinc plated screws such as black front...
2 item(s)
End of line
+

£4.02 £3.01 (£3.61 incl VAT)
4307-070
Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. Pack of 10
1 item(s)
End of line
+

£4.11 £3.29 (£3.95 incl VAT)
4555-751
3 item(s)
End of line
+

£4.11 £3.29 (£3.95 incl VAT)
4555-752
Rubber 'O' ring assortment pack. Includes most common sizes. Suitable for plumbing, car repair etc. Supplied in clear plastic organiser case. 3x6 - 20x27mm...
1 item(s)
End of line
+

£0.24 £0.18 (£0.22 incl VAT)
4603-144
2 item(s)
End of line
+

£1.20 £0.72 (£0.86 incl VAT)
4302-412
A pack of 50 M4 x 12mm flange head screws that have a large diameter low profile head for use with pozi or flat blade drivers.
12 item(s)
End of line
+

£1.49 £1.19 (£1.43 incl VAT)
4473-001
Brass Square Tube 1.59 x 305mm
3 item(s)
End of line
+

£0.48 £0.32 (£0.38 incl VAT)
4355-001
Lynch Pin 4.5mm x 40mm
22 item(s)
End of line
+

£10.68 £9.42 (£11.30 incl VAT)
4251-002
UCFL202 Flanged Bearing Unit 2 Bolt Cast 15mm
8 item(s)
End of line
+

£0.80 (£0.96 incl VAT)
4602-050
From the same range but too small for a brass hub. Use with a 4mm or 2mm diameter shaft. 10mm Diameter. Ideally use with 2.5mm round rubber belts.
Currently Unavailable
Discontinued Product

£1.31 £1.18 (£1.42 incl VAT)
4473-002
Brass Square Tube 2.38 x 305mm
8 item(s)
End of line
+

£0.22 £0.11 (£0.13 incl VAT)
4354-002
Split Pin 1" x 5/64" BZP Pk/10
3 item(s)
End of line
+

£0.91 £0.67 (£0.80 incl VAT)
4611-020
These new hard plastic wheels are specially designed for our GM2, GM3, GM8, GM9 & GM17 gear motor output shafts. Although usable as wheels, we often use...
5 item(s)
End of line
+

£0.40 £0.32 (£0.38 incl VAT)
4602-110
Overall size 26 x 19mm, Interference fit on 4mm diameter shaft, hole centres 9.5mm apart, 6mm thick.
Currently Unavailable
Discontinued Product

£0.24 £0.12 (£0.14 incl VAT)
4354-003
Split Pin 1.5" x 3/32" BZP Pk/10
16 item(s)
End of line
+

£8.21 £7.25 (£8.70 incl VAT)
4253-014
UCP206
2 item(s)
End of line
+

£0.56 £0.37 (£0.44 incl VAT)
4355-003
Lynch Pin 8mm x 45mm
24 item(s)
End of line
+

£7.62 £6.72 (£8.06 incl VAT)
4253-015
UCP203 Pillow Block Cast Bearing Unit 17mm
3 item(s)
End of line
+

£6.89 £6.08 (£7.30 incl VAT)
4251-004
UCFL205
4 item(s)
End of line
+

£0.48 £0.38 (£0.46 incl VAT)
4351-013
R Pin 5 x 25 x 104mm
9 item(s)
End of line
+

£0.30 £0.15 (£0.18 incl VAT)
4354-004
Split Pin 1.5" x 7/64" BZP Pk/10
16 item(s)
End of line
+

£0.30 £0.24 (£0.29 incl VAT)
4350-007
Clevis Pin 7.82 x 19.5mm
37 item(s)
End of line
+

£0.63 £0.42 (£0.50 incl VAT)
4355-004
Lynch Pin 10mm x 45mm
21 item(s)
End of line
+

£0.28 £0.15 (£0.18 incl VAT)
4611-022
The PRet plastic retainer is a plastic hub designed to press-fit onto a 1.5mm shaft. It can also be useed as a hub for making micro wheels out of, use...
13 item(s)
End of line
+

£2.28 £1.71 (£2.05 incl VAT)
4300-072
Pan Head M2.5 x 16 Pk of 100 Sold in bags of 100
1 item(s)
End of line
+

£8.19 £7.23 (£8.68 incl VAT)
4251-005
UCFL206
7 item(s)
End of line
+

£0.42 £0.21 (£0.25 incl VAT)
4354-005
Split Pin 1.5" x 1/8" BZP Pk/10
14 item(s)
End of line
+

£3.18 £2.12 (£2.54 incl VAT)
4611-004
Looking for a quick and easy way to attach a wheel to a servo for a wheeled robot? Here's the answer! This custom-molded black wheel is designed to fit to...
17 item(s)
End of line
+

£0.71 £0.57 (£0.68 incl VAT)
4351-014
R Pin 6 x 29 x 119mm
102 item(s)
End of line
+

£6.92 £6.11 (£7.33 incl VAT)
4251-006
UCFL203 Flanged Bearing Unit 2 Bolt Cast 17mm
3 item(s)
End of line
+

£0.30 £0.15 (£0.18 incl VAT)
4354-006
Split Pin 1.5" x 9/64" BZP Pk/5
29 item(s)
End of line
+

£0.99 £0.66 (£0.79 incl VAT)
4355-006
Lynch Pin 11mm x 50mm
2 item(s)
End of line
+

£0.32 £0.16 (£0.19 incl VAT)
4354-007
Split Pin 1.5/8" x 5/32" BZP Pk/5
28 item(s)
End of line
+

£5.85 £5.16 (£6.19 incl VAT)
4604-123
This double sided Aluminium bearing house accepts any of our bearings with an overall diameter (OD) of 22mm such as these: 6mm bore 8mm bore 10mm...
5 item(s)
End of line
+

£0.65 £0.49 (£0.59 incl VAT)
4300-106
Pan Head M5 x 6 per 25
5 item(s)
End of line
+

£0.72 £0.54 (£0.65 incl VAT)
4300-107
Pan Head M5 x 10 per 25
6 item(s)
End of line
+

£2.98 £2.24 (£2.69 incl VAT)
4300-013
Sold in packs of 50 screws
8 item(s)
End of line
+

£0.62 £0.46 (£0.55 incl VAT)
4300-108
Pan Head M5 x 16 per 25
37 item(s)
End of line
+

£3.18 £2.39 (£2.87 incl VAT)
4300-015
Pan Head M5 x 20 per 100 Sold in multiples of: 100g For info, approx quantity of fixings / 100g: 26
3 item(s)
End of line
+

£0.42 £0.31 (£0.37 incl VAT)
4300-109
Pan Head M5 x 25 per 10
13 item(s)
End of line
+

£1.28 £0.96 (£1.15 incl VAT)
4300-019
Sold in packs of 10 screws
5 item(s)
End of line
+

£7.99 £7.05 (£8.46 incl VAT)
4251-015
UCF203 Flanged Bearing Unit 4 Bolt Cast 17mm
1 item(s)
End of line
+

£1.47 £1.10 (£1.32 incl VAT)
4300-023
Pan Head M6 x 20 pk 25 Sold in multiples of 25
12 item(s)
End of line
+

£0.70 £0.52 (£0.62 incl VAT)
4300-025
Sold in packs of 10 screws
30 item(s)
End of line
+

£0.89 £0.67 (£0.80 incl VAT)
4300-027
Sold in packs of 10 screws
29 item(s)
End of line
+

£0.31 £0.23 (£0.28 incl VAT)
4300-029
Sold in packs of 10 screws
28 item(s)
End of line
+

£0.80 £0.60 (£0.72 incl VAT)
4307-014
There are your standard Philips-head 4-40 screws. They are 1/4" long and come in packs of ten. This is the screw size Sparkfun use in most of the holes...
2 item(s)
End of line
+

£3.12 £1.31 (£1.57 incl VAT)
4262-002
Type 3025 with 2 fixing holes and a 25mm steel ball. Maximum loading up 55kg, down 25kg Max diameter 56mm Working height of ball 14.6mm Under flange to...
2 item(s)
End of line
+

£1.51 £1.20 (£1.44 incl VAT)
4307-017
Standard Philips-head 4-40 screws. They are 1/2" long and come in packs of ten. This is the screw size that Sparkfun use in most of the holes for their...
14 item(s)
End of line
+

£0.72 £0.48 (£0.58 incl VAT)
4255-092
Ball Bearing: Bore 12mm Outer Diameter 28mm Width 8mm
83 item(s)
End of line
+

£3.11 £2.80 (£3.36 incl VAT)
4471-018
Brass Tube 14.3 OD, 13.64 ID x 305mm Long. Fits inside 4471-019, see related products below.
1 item(s)
End of line
+

£3.51 £3.16 (£3.79 incl VAT)
4471-020
Brass Tube 15.9 OD, 15.23 ID x 305mm Long. Fits inside 4471-021, see related products below.
1 item(s)
End of line
+

£1.08 (£1.30 incl VAT)
4255-205
Ball Bearing: Bore 15mm Outer Diameter 24mm Width 5mm Load rating 2,073N
In stock
+

£1.08 (£1.30 incl VAT)
4255-206
Ball Bearing: Bore 15mm Outer Diameter 28mm Width 7mm Load rating 4,321N
In stock
+

£1.08 (£1.30 incl VAT)
4255-210
Ball Bearing: Bore 17mm Outer Diameter 35mm Width 10mm Load rating 6,000N
In stock
+

£1.61 £1.20 (£1.44 incl VAT)
4307-054
These are standard 4-40 zinc-plated nuts. Note: These come in packs of 10
7 item(s)
End of line
+

£1.58 £1.18 (£1.42 incl VAT)
4307-056
These are standard locknuts with 4-40 thread. For use with 4-40 machine screws. They have a nylon insert that allows them to stay tightly in place....
2 item(s)
End of line
+

£2.64 £2.11 (£2.53 incl VAT)
4604-068
Inserts for the coupling body 4604-050, note these inserts are sold individually allowing you to mix and match to suit your application. We have also...
2 item(s)
End of line
+

£1.79 £1.58 (£1.90 incl VAT)
4609-094
Standard Collar 35x56x16mm BZP. For dimensions and product description, click button below. We source our special order products from the largest...
4 item(s)
End of line
+

£7.09 £6.26 (£7.51 incl VAT)
4609-097
Standard Collar 50x80x18mm BZP. For dimensions and product description, click button below. We source our special order products from the largest...
2 item(s)
End of line
+

£1.27 £0.76 (£0.91 incl VAT)
4300-141
CSK Head M5 x 16 per 100g Sold in multiples of: 100g For info, approx quantity of fixings / 100g: 43
3 item(s)
End of line
+

£1.05 £0.63 (£0.76 incl VAT)
4300-142
CSK Head M5 x 20 per 100g Sold in multiples of: 100g For info, approx quantity of fixings / 100g: 34
8 item(s)
End of line
+

£0.49 £0.37 (£0.44 incl VAT)
4300-041
Sold in packs of 10 screws
5 item(s)
End of line
+

£0.52 £0.39 (£0.47 incl VAT)
4300-042
Sold in packs of 10 screws
37 item(s)
End of line
+

£9.60 £8.47 (£10.16 incl VAT)
4609-099
Standard Collar 60x90x20mm BZP. For dimensions and product description, click button below. We source our special order products from the largest...
2 item(s)
End of line
+

£0.69 £0.51 (£0.61 incl VAT)
4300-045
Sold in packs of 10 screws
12 item(s)
End of line
+

£0.79 £0.59 (£0.71 incl VAT)
4300-046
Sold in packs of 10 screws
21 item(s)
End of line
+

£1.62 (£1.94 incl VAT)
4255-286
9mm bore x 20mm overall diameter x 7mm thick, 3,356N rating, 4,500 rpm max, uses 8 off 3.175mm diameter steel balls.
In stock
+

£0.79 £0.68 (£0.82 incl VAT)
4477-001
Brass Strip 0.4 x 6.35 x 305mm
8 item(s)
End of line
+

£0.98 £0.85 (£1.02 incl VAT)
4477-002
Brass Strip 0.4 x 12.7 x 305mm
15 item(s)
End of line
+

£1.31 £1.14 (£1.37 incl VAT)
4477-003
Brass Strip 0.4 x 19 x 305mm
8 item(s)
End of line
+

£1.69 £1.47 (£1.76 incl VAT)
4477-004
Brass Strip 0.4 x 25.4 x 305mm
14 item(s)
End of line
+

£1.76 £1.53 (£1.84 incl VAT)
4477-005
Brass Strip 0.4 x 51 x 305mm
3 item(s)
End of line
+

£0.98 £0.85 (£1.02 incl VAT)
4477-006
Brass Strip 0.6 x 6.35 x 305mm
3 item(s)
End of line
+

£0.98 £0.85 (£1.02 incl VAT)
4477-007
Brass Strip 0.6 x 12.7 x 305mm
12 item(s)
End of line
+

£1.46 £1.17 (£1.40 incl VAT)
4477-008
Brass Strip 0.6 x 19 x 305mm
6 item(s)
End of line
+

£1.44 £1.25 (£1.50 incl VAT)
4477-009
Brass Strip 0.6 x 25.4 x 305mm
6 item(s)
End of line
+

£0.98 £0.85 (£1.02 incl VAT)
4477-011
Brass Strip 0.8 x 6.35 x 305mm
5 item(s)
End of line
+

£3.94 £3.41 (£4.09 incl VAT)
4477-019
Brass Strip 1.6 x 25.4 x 305mm
1 item(s)
End of line
+