Save 27%

FingerTech Gold Spark 16mm Gearmotor 35:1 6V

List price: £13.70
£10.04
(£12.05 UK, incl VAT) You save: £3.66 (27%)
Price in points: 2008 points
1451-701
28 g
1 item(s)
End of Line
+
Add to wish list

These are what your robots have been waiting for. These custom engineered robot drive motors are designed to handle the rigor of combat without breaking, and they won't hurt your wallet either!

• The extra-long 3mm shaft is triple-supported internally so that wheels can be mounted directly.
• All-metal spur gear reduction gearhead mated to a Mabuchi FK-050 motor.
• 9 different gear ratios of 20, 35, 50, 63, 86, 115, 150, 250, and 360:1 available. See product title for actual ratio.
• At only 28grams (0.99oz), these are a lightweight yet powerful motor.

These motors make it super simple to get a robot moving! Just pick up a pair of Snap Wheels wheels and Snap Hubs to mount them, solder on a pair of tinyESCs and your motors are ready to be driven by radio control!  For mounting the motors, use 2-56 screws and our custom motor mounts.  We now also carry 3mm bearing blocks for supporting the shaft in heavy robots or weapon systems.

Specifications

Motor (Mabuchi FK-050SH-13125) Specifications
Operating Voltage: 3V - 18.5V (>10V decreases motor life)
Nominal Voltage: 6Vdc
No Load RPM: 11530rpm
No Load Current: 0.09A
Stall Current: 1.3A
Stall Torque: 0.0461kg-cm (0.64oz-in)
Kt: 0.0352kg-cm/A (0.49oz-in/A)
Kv: 1573rpm/V
Peak Efficiency: 52%
RPM @ Peak Eff: 9100
Current @ Peak Eff: 0.34A
See image above for the motor torque, current, rpm and efficiency curve.
Physical Specifications
Gearbox Length: 11.6mm (0.455in)
Motor Length: 28.7mm (1.13in)
Total Gearmotor Length: 40.3mm (1.59in)
Gearbox Diameter: 15.5mm (0.61in)
Shaft Diameter: 3mm (0.12in) with flat along length
Shaft Length: 38mm (1.5in)
Mounting Holes (2): #2-56 spaced 11mm (0.433in) apart
-do not use screws that protrude more than 4mm (0.156in) into gearbox

Weight (all ratios): 28grams (0.99oz)


Some ratio gearboxes can be interchanged because they use the same pinion gears on the motor.
20, 35, 50, 63: 18T pinions
86, 115, 150, 250: 16T pinions
360: 14T pinion
So (for example) you can remove the 50:1 ratio gearbox from its motor and replace it with a 35:1 ratio gearbox for more speed - without needing to desolder the motor!  (Might want to swap the stickers so you know what's in the robot!)
 

No Load Speed @ Gear Ratio/Voltage



Motors have been tested to work up to 22.2V (6 lipoly cells), but don't expect the motor to run that high forever!
Maximum Torque @ Ratio/Voltage kg-cm



Exceeding 6.84kg-cm (95oz-in) will damage the output gear stage. Do not stall the motors highlighted in red at the indicated voltage.
4611-520
£10.78 £5.75 (£6.90 UK, incl VAT)
4611-520
With Snap Hubs, you can easily and securely mount the Snap Wheel foam tyres to your robot. The tyres are available in widths of 12.7mm or 19.05mm, these...
3 item(s)
End of Line

4611-500
£2.23 £1.19 (£1.43 UK, incl VAT)
4611-500
A pack of 2 wheels of 25.4mm diameter by 12.7mm wide • LiteTech Treads (high-quality neoprene foam tyres) mated with the Snap Hubs give you a...
5 item(s)
End of Line

4611-501
£2.39 £1.28 (£1.54 UK, incl VAT)
4611-501
A pack of 2 wheels of 31.75mm diameter by 12.7mm wide • LiteTech Treads (high-quality neoprene foam tyres) mated with the Snap Hubs give you a...
2 item(s)
End of Line

4611-502
£2.57 £1.37 (£1.64 UK, incl VAT)
4611-502
A pack of 2 wheels of 38.1mm diameter by 12.7mm wide • LiteTech Treads (high-quality neoprene foam tyres) mated with the Snap Hubs give you a...
3 item(s)
End of Line

Customers also bought....

4255-158
£1.26 (£1.51 UK, incl VAT)
4255-158
Ball Bearing: Bore 3mm Outer Diameter 6mm Flange Outer Diameter 7.2mm Width 2.5mm Load rating 209N
In Stock

4255-162
£1.26 (£1.51 UK, incl VAT)
4255-162
Ball Bearing: Bore 4mm Outer Diameter 8mm Flange Outer Diameter 9.2mm Width 3mm Load rating 395N
In Stock

1207-009
£0.27 £0.18 (£0.22 UK, incl VAT)
1207-009
D Type Connector PCB Plug 9W
17 item(s)
End of Line

Minimum quantity for "D Type Connector PCB Plug 9W" is 4.


4311-001
£1.83 (£2.20 UK, incl VAT)
4311-001
Plated steel M3 nylon lock nut in a pack of 100
In Stock

4323-103
£0.27 (£0.32 UK, incl VAT)
4323-103
M3 bare steel studding 100mm long. Sold in individual lengths.
In Stock

Minimum quantity for "Threaded rod M3 x 100mm" is 5.