Testimonials Testimonials

FingerTech Bearing Block for 3mm Shafts

£3.42
(£4.10 UK, incl VAT)
Price in points: 684 points
4604-104
5 g
In stock
+

This bearing block can be used as a motor mount for 16mm gearmotors (such as our Spark motors) or as a simple bearing block for a 3mm shaft. The bearing works with the Spark Motors by aligning the mounting holes to the Spark mounting holes and offers additional shaft support.

 Specifications:
- Height: 19.05mm (0.75in)
- Width: 25.4mm (1.0in)
- Thickness: 4.76mm (0.188in)
- Weight: 5grams (0.18oz)
- Includes pressed-in 3mm shielded ball bearing
- Twelve 4-40 threaded holes for mounting in many orientations (See drawing under the 'Downloads' tab for hole locations)

- If you have a 12x10 gearbox, you can mill a slot in these blocks to make mounting them easy!

Requires:
To mount motors, use 2-56 x 3/16" screws (not included).
To fasten mounts, use 4-40 screws (not included).

Downloads

No posts found

Write a review

No FAQ found

Customers also bought....

4609-030
£1.29 (£1.55 UK, incl VAT)
4609-030
3mm Zinc Collets bright Zinc plated - pack of 4 including grub screws and matching hex key     Bore: 3mm     Overall Diameter 8mm...
In stock

4307-016
£0.93 £0.47 (£0.56 UK, incl VAT)
4307-016
We stock a number of products that originate from the USA and as such many have American imperial tapped holes. This #4-40, pan-head screw is 1/2" long. It...
13 item(s)
End of line

1441-021
£3.24 (£3.89 UK, incl VAT)
1441-021
These anodized aluminum motor mounts will fit just about any small motor with mounting hole distances from 10mm - 12.5mm (0.39 - 0.49in). ...
In stock

4611-521
£10.78 (£12.94 UK, incl VAT)
4611-521
With Snap Hubs, you can easily and securely mount the Snap Wheel foam tyres to your robot. The tyres are available in widths of 12.7mm or 19.05mm, these...
Currently out of stock

4307-002
£0.93 £0.47 (£0.56 UK, incl VAT)
4307-002
We stock a number of products that originate from the USA and as such many have American imperial tapped holes. This #2-56, pan-head screw is 1/4" long. It...
3 item(s)
End of line