Save 24%

Fan 12V 40x40x10mm Sleeve Bearing

List price: £5.58
£4.25
(£5.10 UK, incl VAT) You save: £1.33 (24%)
Price in points: 850 points
1458-306
17 g
1 item(s)
End of Line
+
Add to wish list

This 12V sleeve bearing DC fan is both reliable and quiet with a life expectancy of 30,000 hours.

  • Motor: Brushless DC, auto restart impedance and polarity protected
  • Impeller and frame: Glass fibre reinforced thermoplastic PBT UL94V–0
  • Insulation resistance: 10M at DC500V min.
  • Dielectric strength: 500V AC/ 1 second max.
  • Permissible temperature range: –10°C to +50°C
  • Life expectancy at 40°C: 30,000 hours
  • CE, UL and CUL approved
  • Fitted with flying leads
  • Dimensions: 40 x 40 x 10mm

 

Rated Voltage DC 12V
Start up voltage DC 5V
Watts 1.2W
Current 0.10A
Speed 6500rpm
Air flow 6.08CFM
Static pressure 0.16 inch
Noise level 28dB
Weight 16g

Customers also bought....

1151-062
£0.74 £0.37 (£0.44 UK, incl VAT)
1151-062
1.2mm yellow flexible polyolefin heat shrink sleeving for insulation and cable marking etc.. Shrink ratio 2:1 Also available in black, red,...
18 item(s)
End of Line

Minimum quantity for "Heatshrink 1.2m Pack, Yellow 1.5mm Unshrunk Diameter" is 2.


2110-522
£0.13 £0.10 (£0.12 UK, incl VAT)
2110-522
5mm tri-colour LEDs housed in water clear package. Two diodes are connected in a common cathode configuration. By connecting both together a third colour is...
31 item(s)
End of Line

Minimum quantity for "5mm LED Red/Green Tri-Colour Clear Lens" is 5.


2300-465
£0.12 £0.06 (£0.07 UK, incl VAT)
2300-465
BC546B NPN Transistor Downloads Datasheet
119 item(s)
End of Line

Minimum quantity for "BC546B NPN Transistor" is 10.


1613-407
£0.24 (£0.29 UK, incl VAT)
1613-407
These small, two-pin, tactile buttons are intended for mounting to PCBs, but they can also be plugged into standard 0.1" breadboards. They work well as reset...
26 item(s)
End of Line

Minimum quantity for "Tactile Switch PCB Mounting 6x3.5x4.3mm" is 5.


1063-031
£0.36 (£0.43 UK, incl VAT)
1063-031
2 x AA Battery Holder Press Stud
In Stock

Minimum quantity for "2 x AA Battery Holder Press Stud" is 2.