Testimonials Testimonials

DC Power Socket Chassis Mounting 2.1mm

(£1.27 UK, incl VAT)
Price in points: 212 points
2 g
In stock

High quality chassis mounting DC socket for 2.1mm power plugs.

  • Flush mounting with single hole fixing
  • 12V, 1A rating
  • Supplied with hexagonal fixing nut
  • Integral break switch on outer contact
  • Suitable for panel thickness up to 2.5mm
  • Panel cut-out 12.6mm
  • Overall dimensions: bezel diameter 14mm, length 15.7mm


No posts found

Write a review

Hi, What is the current rating on this item? thanks

Asked by Phil | 02/03/2013, 23:14 | 1 answer(s)

Is there some form of grommet or sleeve available that will insulate the barrel and nut etc of a 2.1 mm chassis mounting dc socket from the chassis if it's built into an aluminium enclosure? (I'm assuming that the barrel/retaining nut etc., all form part of the return path if the pin is positive, or the positive side of the connection if the pin is negative). I'm planning on building a power distribution brick for guitar effects supplying multiple instances of various voltages with selectable polarity on each output socket (most pedals require a centre neg supply but some are centre +) and I need to make sure that each output socket is isolated from it's neighbours. Not a problem with an ABS enclosure I know but these will be sitting on guitar pedalboards with a risk of being stamped on so I'd rather use a metal enclosure for durability. Many thanks Simon Alexander

Asked by Simon | 11/12/2012, 12:22 | 1 answer(s)

I am confused with the wire connectors at the back. Which is positive and which is negative? I am trying to connect it to a 7A Bidirectional Digital Motor Speed Controller (http://www.technobotsonline.com/7a-bidirectional-digital-motor-speed-controller.html) I thought the centre one must be positive because the DC connector plugs centre is positive....but from what I have read the centre of this DC power socket is supposed to be negative. Please help...thank you so much

Asked by Philip Panchenko | 04/10/2011, 19:29 | 1 answer(s)

Customers also bought....

£0.38 (£0.46 UK, incl VAT)
DC Power Plug 2.1mm x 10mm Long Overall diameter: 5.5mm Internal diameter: 2.1mm Shank Length: 10mm
In stock

£1.07 (£1.28 UK, incl VAT)
High quality chassis mounting DC socket for 2.5mm power plugs. Flush mounting with single hole fixing 12V, 1A rating Supplied with hexagonal...
In stock

£0.23 £0.12 (£0.14 UK, incl VAT)
BD135 NPN 45V Transistor Downloads Datasheet
5 item(s)
End of line

£1.18 (£1.42 UK, incl VAT)
Right angle miniature re-wireable 2.1mm right angle power plug with a 5.5mm barrel diameter.   10mm long shaft  ...
In stock

£1.01 (£1.21 UK, incl VAT)
High quality DC power socket featuring nickel plated bodies and single hole fixing for 2.1mm power plugs. Suitable for panel thickness up to 2.5mm...
In stock