These pins can be crimped on wires and snapped into our crimp connector housings (2702-001 to 2702-038) to create custom cables that are compatible with standard 0.1"-pitch male and female headers and solderless breadboards. They work with 22 to 28AWG wires, though 22AWG wires with thick insulation might be difficult to fit into the pins.
Note that crimping these pins on wires can be a difficult and time-consuming process without a good crimping tool (and sometimes even with a good crimping tool). Please consider our wires with pre-crimped terminals, which use these same pins, or our premium jumper wires (1133-010) as simpler alternatives.
Sold individually
No posts found
Asked by Tom Bates | 23/06/2012, 21:05 | 1 answer(s)
Asked by Charles McDonald | 25/07/2011, 18:27 | 1 answer(s)