Testimonials Testimonials

Save 20%

Breadboard Power Supply kit

List price: £9.03
£8.68 incl VAT
(£7.23 exc. tax) You save: £1.80 (20%)
Price in points: 1446 points
11.000 g.
3 item(s)
End of line
A very simple breadboard power supply kit from Sparkfun PRT-00114 that takes power from a DC plugtop power supply and outputs a selectable 5V or 3.3V regulated voltage. The .1" headers are mounted on the bottom of the PCB for simple insertion into a breadboard. Pins labeled VCC and GND plug directly into the power lines. The lone pair of pins have no electrical connection but help support the PCB.

There are two pins available within the barrel jack footprint. Any stripped +/- DC supply can be connected instead of the barrel connector. Board has both an On/Off switch and a voltage select switch (3.3V/5V).

Comes as a bag of parts kit and is easily assembled if you can follow the silkscreen indicators and have beginning experience with a soldering iron. You will need to read the resistor bands or use a multimeter to determine the resistor sizes.

Kit Contains:

* DC Barrel Connector (2.1mm center positive)
* TO-220 Voltage Regulator (LM317 1.5A max current)
* 1N4004 Reverse Protection Diode
* 100uF 25V Capacitor
* 10uF 25V Capacitor
* 0.1uF 50V Capacitor
* Red Power LED - High Brightness
* 2pcs SPDT Slide Switch
* 4pcs 0.1" Header Pins
* 2pcs 330 Resistor 1/6W
* 390 Resistor 1/6W
* 240 Resistor 1/6W
* Bare PCB with Silkscreen Indicators
* PTC resettable fuse


Manufacturer's Details

Manufacturer's SKU :

No posts found

Write a review

No FAQ found

Customers also bought....

£14.59 incl VAT (£12.16 exc. tax)
This breadboard features two 830-point breadboards on an 216mm x 133mm aluminum base. Three binding posts allow you to quickly connect and disconnect power. read more
1 item(s)
End of line
Price in points: 2432 points

£1.18 incl VAT (£0.98 exc. tax)
95mm x 64mm Copper Clad Stripboard read more
In stock
Price in points: 196 points

£0.40 incl VAT (£0.33 exc. tax)
DC Power Plug 2.1mm x 10mm Long Overall diameter: 5.5mm Internal diameter: 2.1mm Shank Length: 10mm read more
In stock
Price in points: 66 points

£0.20 incl VAT (£0.17 exc. tax)
Height above PCB 5mm. Each switch has a body size of 6 x 6mm square, the height figure is the height from the PCB to the top of the switch 'knob'.... read more
In stock
Price in points: 34 points

£2.81 £2.69 incl VAT (£2.24 exc. tax)
Heavy duty metal base featuring reinforced spring holder. Supplied with cleaning sponge. read more
1 item(s)
End of line
Price in points: 449 points