No data found

Close

 

EU Orders under £125 (€150) - As a registered IOSS company, EU orders include VAT avoiding additional charges and delays for the customer at Customs entry.

EU Orders over £125 (€150) and for EU business customers - Please note, VAT and duty may be charged direct to the customer at customs entry by the shipping company.  EU business user accounts can be upgraded to be automatically VAT exempt on request. 

Categories

Testimonials Testimonials

Save 50%

Bearing Block for Bearings with a 16mm Overall Dia

Write a review
List price: £4.57
£2.29
(£2.75 UK, incl VAT) You save: £2.28 (50%)
Price in points: 458 points
4604-111
20 g
2 item(s)
End of line
+ −
Add to wish list Add to comparison list

This single sided Aluminium bearing house accepts any of our bearings with an overall diameter (OD) of 16mm such as these:

5mm bore

8mm bore

See related products above.

The bearing can be retained with an adhesive if required. The block is a blank in that no fixing holes have been pre-drilled but it is relatively easy to drill and even tap to suit your application. We also stock a double version that accepts two 16mm OD bearings.

Dimensions:

  • 30x30x9mm with a 5mm deep pocket

No posts found

Write a review

I feel sure that yesterday I saw a photo and details on your website of at least one double sided bearing block (ie capable of accepting two bearings back to back) of cross section . 30 x 30 . But today I cannot find it on your website. I 'm looking for a double sided bearing block for 16 mm overall diameter bearings and hope you will be able to direct me to it on your website. Thank you.

Asked by John Mather | 08/01/2021, 11:22 | 1 answer(s)

With regard to the 16 mm OD Bearing Block, should bearings (both radial and thrust) be pressed into the block using a vice or by gentle tapping with a with a hammer with a piece of wood placed on the bearing to avoid direct contact between hammer (or vice) and the bearing ?

Asked by John Mather | 06/01/2021, 16:17 | 1 answer(s)
New post
Miniature Model Bearing 625ZZ 5x16x5
4255-052
Miniature Model Bearing 625ZZ 5x16x5
£0.66 (£0.79 UK, incl VAT)
4255-052
Ball Bearing: Bore 5mm Outer Diameter 16mm Width 5mm
Currently out of stock
Miniature Model Bearing 688ZZ 8X16X5
4255-142
Miniature Model Bearing 688ZZ 8X16X5
£0.66 (£0.79 UK, incl VAT)
4255-142
Ball Bearing: Bore 8mm Outer Diameter 16mm Width 5mm Load rating 1252N
In stock

Customers also bought....

Miniature Model Bearing 688ZZ 8X16X5
4255-142
Miniature Model Bearing 688ZZ 8X16X5
£0.66 (£0.79 UK, incl VAT)
4255-142
Ball Bearing: Bore 8mm Outer Diameter 16mm Width 5mm Load rating 1252N
In stock
Miniature Model Bearing 634ZZ 4X16X5
4255-125
Miniature Model Bearing 634ZZ 4X16X5
£0.66 (£0.79 UK, incl VAT)
4255-125
Ball Bearing: Bore 4mm Outer Diameter 16mm Width 5mm  
In stock
Silver Steel 8mm x 333mm
4426-008
Silver Steel 8mm x 333mm
£3.57 (£4.28 UK, incl VAT)
4426-008
Silver Steel 8mm x 333mm
In stock
Hardened & Chromed Steel Rod 8mm x 400mm
4427-084
Hardened & Chromed Steel Rod 8mm x 400mm
£8.00 (£9.60 UK, incl VAT)
4427-084
A chromed and induction hardened C1045 carbon steel rod / bar. You will struggle to cut to length with an ordinary hacksaw so best to use an abrasive cut...
Currently out of stock
Synchroflex Timing Pulley T5x10mm 30T
4621-130
Timing Pulley T5x10mm 30T
£7.06 (£8.47 UK, incl VAT)
4621-130
Timing Pulley T5x10mm 30T For dimensions and a full product description please see here See the 'Custom Machining' tab for details on different bore...
In stock